Datasheet

UNISONIC TECHNOLOGIES CO., LTD
U74LVC1G09
CMOS IC
SINGLE 2-INPUT
POSITIVE-AND GATE WITH
OPEN-DRAIN OUTPUT
„
DESCRIPTION
The U74LVC1G09 is a single 2-input AND gate with
open-drain output . It performs the Boolean function Y = A • B or
Y = A+ B in positive logic . For digital operation this device must
have a external pull-up resistor to establish a logic HIGH-level.
This device has power-down protective circuit, preventing
device destruction when it is powered down.
„
FEATURES
* Operate from 1.65V to 5.5V
* Inputs accept voltages to 5.5V
* Ioff supports partial-power-down mode
* ±24mA output drive(VCC=3.3V)
* Low power dissipation
* High noise immunity
„
ORDERING INFORMATION
Ordering Number
Lead Free
U74LVC1G09L-AE5-R
U74LVC1G09L-AL5-R
„
Halogen Free
U74LVC1G09G-AE5-R
U74LVC1G09G-AL5-R
Package
Packing
SOT-23-5
SOT-353
Tape Reel
Tape Reel
MARKING
www.unisonic.com.tw
Copyright © 2012 Unisonic Technologies Co., Ltd
1 of 5
QW-R502-820.A
U74LVC1G09
„
PIN CONFIGURATION
„
FUNCTION TABLE
CMOS IC
INPUT(A)
INPUT(B)
L
L
L
H
H
L
H
H
Note: H: HIGH voltage level, L: LOW voltage level.
„
OUTPUT(Y)
L
L
L
H
LOGIC DIAGRAM (positive logic)
IEC logic symbol
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 5
QW-R502-820.A
U74LVC1G09
„
CMOS IC
ABSOLUTE MAXIMUM RATING
PARAMETER
SYMBOL
VCC
VIN
Supply Voltage
Input Voltage
RATINGS
-0.5 ~ +6.5
-0.5 ~ +6.5
-0.5 ~ +6.5
Output in the high or low state
VOUT
Output in the high-impedance or
-0.5 ~ +6.5
power-off state
VCC or GND Current
ICC
±100
Continuous Output Current (VOUT=0 to VCC )
IOUT
50
Input Clamp Current (VIN<0)
IIK
-50
Output Clamp Current (VOUT<0)
IOK
-50
Operating Temperature
TOPR
-40~+85
Storage Temperature Range
TSTG
-65 ~ +150
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
UNIT
V
V
V
Output Voltage
„
V
mA
mA
mA
mA
°C
°C
RECOMMENDED OPERATING CONDITIONS
PARAMETER
SYMBOL
Supply Voltage
VCC
Input Voltage
VIN
Output Voltage
VOUT
Low-level Output Current
Input Transition Rise or Fall
Rate
IOL
Δt/ΔV
TEST CONDITIONS
Operating
Data retention only
active mode
high-impedance mode
VCC=1.65V
VCC=2.3V
VCC=3V
VCC=3V
VCC=4.5V
VCC=1.8V±0.15V, 2.5V±0.2V
VCC=3.3V±0.3V
VCC=5V±0.5V
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN TYP MAX
1.65
5.5
1.5
0
5.5
0
VCC
0
5.5
4
8
16
24
32
20
10
5
UNIT
V
V
V
V
V
mA
mA
mA
mA
mA
ns/V
ns/V
ns/V
3 of 5
QW-R502-820.A
U74LVC1G09
„
CMOS IC
ELECTRICAL CHARACTERISTICS (TA =25°C , unless otherwise specified)
PARAMETER
SYMBOL
High-level Input Voltage
VIH
Low-level Input Voltage
VIL
Low-Level Output Voltage
VOL
Input Leakage Current
Power OFF Leakage Current
II(LEAK)
Ioff
Quiescent Supply Current
ICC
Additional Quiescent Supply
Current Per Input Pin
ΔICC
Input Capacitance
Output Capacitance
CI
COUT
„
TYP
3.5
4.5
MAX
0.35*VCC
0.7
0.8
0.3*VCC
0.1
0.45
0.3
0.4
0.55
0.55
±1
±10
UNIT
V
V
V
V
V
V
V
V
V
V
V
V
V
V
μA
μA
10
μA
500
μA
pF
pF
SWITCHING CHARACTERISTICS (TA=25°С, unless otherwise specified)
PARAMETER
Propagation delay from input
(A or B) to output(Y)
„
TEST CONDITIONS
MIN
VCC=1.65V~1.95V
0.65*VCC
VCC=2.3V~2.7V
1.7
VCC=3.0V~3.6V
2
VCC=4.5V~5.5V
0.7*VCC
VCC=1.65V~1.95V
VCC=2.3V~2.7V
VCC=3.0V~3.6V
VCC=4.5V~5.5V
IOL=100μA, VCC=1.65~5.5V
IOL=4mA, VCC=1.65V
IOL=8mA, VCC=2.3V
IOL=16mA, VCC=3.0V
IOL=24mA, VCC=3.0V
IOL=32mA, VCC=4.5V
VIN=5.5V or GND, VCC=0 ~ 5.5V
VIN or VOUT=5.5V, VCC=0V
VIN=5.5V or GND, IOUT=0
VCC=1.65~5.5V
VCC=3~5.5V, One input at
VCC-0.6V, Other inputs at VCC or
GND
VCC=3.3V, VIN=VCC or GND
VCC =3.3V, VIN=VCC or GND
SYMBOL
tPZL / tPLZ
TEST CONDITIONS
VCC=1.8±0.15V, CL=15pF, RL=1MΩ
VCC=2.5±0.2V, CL=15pF, RL=1MΩ
VCC=3.3±0.3V, CL=15pF, RL=1MΩ
VCC=5±0.5V, CL=15pF, RL=1MΩ
VCC=1.8±0.15V, RL=1KΩ
VCC=2.5±0.2V, RL=500Ω
CL=30pF or 50pF
VCC=3.3±0.3V, RL=500Ω
VCC=5±0.5V, RL=500Ω
MIN TYP MAX UNIT
2.9
7.4 ns
1.7
3.8 ns
1.5
4.9 ns
0.9
2.4 ns
2.8
10
ns
1.6
6.0 ns
1.4
4.5 ns
1.0
3.9 ns
OPERATING CHARACTERISTICS (TA=25°С, unless otherwise specified)
PARAMETER
SYMBOL
Power Dissipation Capacitance
CPD
TEST CONDITIONS
VCC=1.8V, f=10MHZ
VCC=2.5V, f=10MHZ
VCC=3.3V, f=10MHZ
VCC=5V, f=10MHZ
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN TYP MAX UNIT
3
pF
3
pF
4
pF
6
pF
4 of 5
QW-R502-820.A
U74LVC1G09
„
CMOS IC
TEST CIRCUIT AND WAVEFORMS
Note: Since this device has open drain outputs, the tPLZ and tPZL is the same as tPLH and tPHL .
VCC
1.8V±0.15V
2.5V±0.2V
3.3V±0.3V
5V±0.5V
1.8V±0.15V
2.5V±0.2V
3.3V±0.3V
5V±0.5V
VIN
VCC
VCC
3V
VCC
VCC
VCC
3V
VCC
tR/tF
≤2ns
≤2ns
≤2.5ns
≤2.5ns
≤2ns
≤2ns
≤2.5ns
≤2.5ns
VM
VCC/2
VCC/2
1.5V
VCC/2
VCC/2
VCC/2
1.5V
VCC/2
VLOAD
2*VCC
2*VCC
6V
2*VCC
2*VCC
2*VCC
6V
2*VCC
CL
15pF
15pF
15pF
15pF
30pF
30pF
50pF
50pF
RL
1MΩ
1MΩ
1MΩ
1MΩ
1KΩ
500Ω
500Ω
500Ω
VΔ
0.15V
0.15V
0.3V
0.3V
0.15V
0.15V
0.3V
0.3V
Note: CL includes probe and jig capacitance.
All input pulses are supplied by generators having the following characteristics: PRR ≤10MHz, ZO = 50Ω.
Since this device has open drain outputs, the tPLZ and tPZL is the same as tPLH and tPHL .
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 5
QW-R502-820.A
Similar pages