UNISONIC TECHNOLOGIES CO., LTD U74AUP1G06 CMOS IC LOW-POWER SINGLE INVERTER BUFFER/DRIVER WITH OPEN-DRAIN OUTPUTS DESCRIPTION The U74AUP1G06 is a single inverting buffer with open-drain outputs and it provides the function Y= A in positive logic. The output of this device is open-drain, and can be connected to other open-drain outputs to implement active-low wired-OR or active-high wired-AND functions. This device is ensures a very low static and dynamic power consumption across the entire VCC range from 0.8V to 3.6V. This device has power-down protective circuit, preventing device destruction when it is powered down. FEATURES * Wide supply voltage range from 0.8V to 3.6V * Inputs accept voltages up to 3.6V * IOFF supports partial-power-down mode * Low static power consumption; ICC=0.5μA (Max.) * Optimized for 3.3V Operation ORDERING INFORMATION Ordering Number U74AUP1G06G-AE5-R U74AUP1G06G-AL5-R U74AUP1G06G-K06-1010-R Package SOT-23-5 SOT-353 DFN-6(1.0×1.0) Packing Tape Reel Tape Reel Tape Reel MARKING SOT-23-5 / SOT-353 www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd DFN-6(1.0×1.0) 1 of 5 QW-R502-883.D U74AUP1G06 PIN CONFIGURATION FUNCTION TABLE INPUT(A) H L Note: H: HIGH voltage level; CMOS IC OUTPUT(Y) L Z L: LOW voltage level; Z: high impedance state. LOGIC DIAGRAM (positive logic) Logic symbol IEC logic symbol UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 5 QW-R502-883.D U74AUP1G06 CMOS IC ABSOLUTE MAXIMUM RATING PARAMETER Supply Voltage Input Voltage Output Voltage SYMBOL VCC VIN VOUT TEST CONDITIONS Output in the high or low state Output in the power-off state RATINGS -0.5 ~+4.6 -0.5 ~+4.6 -0.5 ~ VCC +0.5 -0.5 ~ +4.6 UNIT V V V V Continuous VCC or GND ICC ±50 mA Current Continuous Output Current IOUT VOUT=0 ~ VCC ±20 mA Input Clamp Current IIK VIN<0 -50 mA Output Clamp Current IOK VOUT >VCC or VOUT<0 -50 mA Storage Temperature Range TSTG -65 ~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. RECOMMENDED OPERATING CONDITIONS PARAMETER Supply Voltage Input Voltage Output Voltage Operating Temperature Input Transition Rise or Fall Rate SYMBOL VCC VIN VOUT TA ∆t/∆v TEST CONDITIONS Operating High or low state MIN 0.8 0 0 -40 TYP VCC=0.8V ~ 3.6V MAX 3.6 3.6 VCC 85 UNIT V V V °C 200 ns/V MAX 0 0.35×VCC 0.7 0.9 0.1 0.3×VCC 0.31 0.31 0.31 0.44 0.31 0.44 ±0.1 ±0.2 UNIT V V V V V V V V V V V V V v V v μA μA ±0.2 μA 0.5 μA 40 μA ELECTRICAL CHARACTERISTICS (TA =25°C , unless otherwise specified) PARAMETER High-level Input Voltage SYMBOL VIH Low-level Input Voltage VIL Low-Level Output Voltage VOL Input Leakage Current Power OFF Leakage Current Additional Power OFF Leakage Current Quiescent Supply Current II(LEAK) Ioff ∆Ioff ICC Additional Quiescent Supply Current Per Input Pin ∆ICC Input Capacitance CI Output Capacitance COUT TEST CONDITIONS VCC=0.8V VCC=1.1V~1.95V VCC=2.3V~2.7V VCC=3.0V~3.6V VCC=0.8V VCC=1.1V~1.95V VCC=2.3V~2.7V VCC=3.0V~3.6V VCC=0.8V~3.6V, IOL=20μA VCC=1.1V, IOL=1.1mA VCC=1.4V, IOL=1.7mA VCC=1.65V, IOL=1.9mA IOL=2.3mA VCC=2.3V IOL=3.1mA IOL=2.7mA VCC=3.0V IOL=4.0mA VCC=0V~3.6V, VIN=GND ~ 3.6 VCC=0V, VIN or VOUT=0V~3.6V VCC=0V~0.2V, VIN or VOUT=0V~3.6V VCC=0.8V~3.6V, IOUT=0 VIN=GND or VCC ~ 3.6V TYP VCC=3.3V, VIN=VCC-0.6V, IOUT=0 VCC=0V, VIN=VCC or GND VCC=3.6V, VIN=VCC or GND VCC =0V, VOUT=GND UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN VCC 0.65×VCC 1.6 2 1.5 1.7 1.7 pF pF pF 3 of 5 QW-R502-883.D U74AUP1G06 CMOS IC SWITCHING CHARACTERISTICS (TA =25°C, Input: tR / tF=3ns, unless otherwise specified) See Fig. 1 and Fig. 2 for test circuit and waveforms. PARAMETER SYMBOL TEST CONDITIONS VCC=0.8V VCC=1.1V±0.1V CL=5pF, VCC=1.5V±0.1V RL=5kΩ VCC=1.8V±0.15V VCC=2.5V±0.2V VCC=3.3V±0.3V VCC=0.8V VCC=1.1V±0.1V CL=10pF, VCC=1.5V±0.1V RL=5kΩ VCC=1.8V±0.15V VCC=2.5V±0.2V Propagation delay from input VCC=3.3V±0.3V tPD (A ) to output(Y) VCC=0.8V VCC=1.1V±0.1V CL=15pF, VCC=1.5V±0.1V RL=5kΩ VCC=1.8V±0.15V VCC=2.5V±0.2V VCC=3.3V±0.3V VCC=0.8V VCC=1.1V±0.1V CL=30pF, VCC=1.5V±0.1V RL=5kΩ VCC=1.8V±0.15V VCC=2.5V±0.2V VCC=3.3V±0.3V MIN 2.3 1.8 1.5 1.2 1.1 2.7 2.2 1.9 1.9 1.6 3.2 2.6 2.3 2.1 2.0 4.4 3.6 3.2 2.9 2.9 TYP 12.8 12 3.5 3.1 2.2 2.2 15.8 12 4.3 3.9 2.9 3.0 18.8 12 5.0 4.8 3.5 3.8 27.8 12 7.6 7.4 5.4 6.5 MAX UNIT ns ns Ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns MAX UNIT pF pF pF pF pF pF OPERATING CHARACTERISTICS (f=10MHz, TA=25°С, unless otherwise specified) PARAMETER Power Dissipation Capacitance SYMBOL CPD TEST CONDITIONS VCC=0.8V VCC=1.1V±0.1V VCC=1.5V±0.1V VCC=1.8V±0.15V VCC=2.5V±0.2V VCC=3.3V±0.3V UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP 1.0 1.0 1.0 1.0 1.0 1.0 4 of 5 QW-R502-883.D U74AUP1G06 CMOS IC TEST CIRCUIT AND WAVEFORMS Note:1. Since this device has open drain outputs, the tPLZ and tPZL is the same as tPLH and tPHL . Fig. 1 LOAD CIRCUITRY FOR SWITCHING TIMES VCC 0.8 1.2±0.1V 1.5±0.1V 1.8±0.15V 2.5±0.2V 3.3±0.3V VIN VCC VCC VCC VCC VCC VCC tR / tF 3ns 3ns 3ns 3ns 3ns 3ns VM VCC/2 VCC/2 VCC/2 VCC/2 VCC/2 VCC/2 VLOAD 2×VCC 2×VCC 2×VCC 2×VCC 2×VCC 2×VCC CL 5,10,15,30pF 5,10,15,30pF 5,10,15,30pF 5,10,15,30pF 5,10,15,30pF 5,10,15,30pF RL 5kΩ 5kΩ 5kΩ 5kΩ 5kΩ 5kΩ V△ 0.1V 0.1V 0.1V 0.15V 0.15V 0.3V Fig. 2 PROPAGATION DELAY FROM INPUT(A) TO OUTPUT(Y) AND OUTPUT TRANSITION TIME Notes: 1. CL includes probe and jig capacitance. 2. All input pulses are supplied by generators having the following characteristics: PRR ≤10MHz, ZO = 50Ω. UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R502-883.D