V I S H AY I N T E R T E C H N O L O G Y, I N C . POSITION SENSORS 20 LHE Resistors - Long Life Non-Contact Sensor Linear Position Sensor, Non-Contacting Hall Effect Technology, Short Strokes: ≤ 10 mm KEY BENEFITS • • • • • • • Long lifespan (no contact, no wear) 10 million cycles minimum Offered with a spring return system True power-on sensor Output mode can be either analog ratiometric of voltage supply or digital PWM Accurate linearity down to ± 1 % Easy and fast mounting principle END PRODUCTS • • • • • • Fork lift truck steering Tractor gear shifts Tilt sensors for trucks Driver presence detection (security function) Pressure measurement Pedal displacement RESOURCES • Datasheet: 20 LHE - http://www.vishay.com/doc?57115 • For technical questions, contact: [email protected] One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT0299-1111 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . POSITION SENSORS 20 LHE LHE 20 www.vishay.com Vishay Sfernice Linear Position Sensor, Non-Contacting Hall Effect Technology, Linear Position Sensor in Hall Effect Technology (0 mm to 10 mm Short Strokes: ≤ 10max.) mm • Accurate linearity down to: ± 1 % • Electrical strokes from 0 mm to 10 mm • Long life: Greater than 10M cycles • Non contacting technology: Hall effect • Model dedicated to all applications in harsh environments • Compliant to RoHS Directive 2002/95/EC ELECTRICAL SPECIFICATIONS PARAMETER STANDARD Electrical stroke Up to 10 mm Linearity ± 2 % or ± 1 % Supply voltage 5 VDC ± 10 % Supply current < 16 mA typical Output signal Analog ratiometric 10 % to 90 % of Vsupply or PWM 10 % to 90 % duty cycle Over voltage protection + 20 VDC Reverse voltage protection - 10 VDC Load resistance recommanded Min. 1 k for analog output and PWM output Hysteresis Static: 0.1 % of Vsupply/Dynamic: 0.25 % of Vsupply Resolution 12 bits MECHANICAL SPECIFICATIONS PARAMETER Mechanical travel 12 mm max. Bearing type Sleeve bearing Standard For spring loaded model: IP 51/without spring: Other on request Weight 26 g ± 4 g ORDERING INFORMATION/DESCRIPTION 20 LHE 1 A W A 1P30 xxxx e1 MODEL FEATURES LINEARITY OUTPUT TYPE OUTPUT SIGNAL SHAFT TYPE SPECIAL REQUEST LEAD FINISH 1: Spring return 2: Without spring X: ± 2 % A: ± 1 % W: Wires Z: Custom A: Analog increasing B: Analog decreasing C: PWM increasing D: PWM decreasing 1: 3.175 mm 9: Special P: Plain T: Threaded M3 x 6 Z: Other type Shaft length from mounting face 30 mm when full extended Revision: 21-Nov-11 Resistors - Long Life Non-Contact Sensor FEATURES SAP PART NUMBERING GUIDELINES 20 LHE 2 X Z C 1T35 xxxx MODEL FEATURES LINEARITY OUTPUT TYPE OUTPUT SIGNAL SHAFT TYPE SPECIAL REQUEST Without spring return system ±2% “Custom” PWM increasing Revision: 21-Nov-11 Document Number: 57115 1 2/2 VMN-PT0299-1111 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT SUBJECT TO SPECIFIC SET FORTH AT HEREIN www.vishay.com/doc?91000 THIS DOCUMENT IS SUBJECT TOARE CHANGE WITHOUT NOTICE.DISCLAIMERS, THE PRODUCTS DESCRIBED AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PRODUCT SHEET