HT71xx-2 30mA TinyPowerTM LDO Features General Description • Low power consumption The HT71xx-2 series is a set of three-terminal low power high voltage regulators implemented in CMOS technology. They allow input voltages as high as 30V. They are available with several fixed output voltages ranging from 2.1V to 5.0V. CMOS technology ensures low voltage drop and low quiescent current. • Low voltage drop • Low temperature coefficient • High input voltage (up to 30V) • Output voltage accuracy: tolerance ±1% • TO92, SOT89 and SOT23-5 package Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain variable voltages and currents. Applications • Battery-powered equipment • Communication equipment • Audio/Video equipment Selection Table Part No. Output Voltage HT7121-2 2.1V HT7123-2 2.3V HT7125-2 2.5V HT7127-2 2.7V HT7130-2 3.0V HT7133-2 3.3V HT7136-2 3.6V HT7144-2 4.4V HT7150-2 5.0V Package Marking TO92 SOT89 SOT23-5 71xx-2 (for TO92, 2.1V~2.7V) 71xxA-2 (for TO92, 3.0V~5.0V) 71xx-2 (for SOT89) 1xx2 (for SOT23-5) Note: ″xx″ stands for output voltages. Rev. 1.20 1 June 12, 2014 HT71xx-2 Block Diagram Pin Assignment Absolute Maximum Ratings Operating Temperature .........................−40°C to 85°C Supply Voltage ....................................... −0.3V to 33V Storage Temperature ...........................−50°C to 125°C Note: These are stress ratings only. Stresses exceeding the range specified under ″Absolute Maximum Ratings″ may cause substantial damage to the device. Functional operation of this device at other conditions beyond those listed in the specification is not implied and prolonged exposure to extreme conditions may affect device reliability. Thermal Information Symbol θJA PD Parameter Thermal Resistance (Junction to Ambient) (Assume no ambient airflow, no heat sink) Power Dissipation Package Max. Unit SOT23-5 500 °C/W SOT89 200 °C/W TO92 200 °C/W SOT23-5 0.20 W SOT89 0.50 W TO92 0.50 W Note: PD is measured at Ta = 25°C Rev. 1.20 2 June 12, 2014 HT71xx-2 Electrical Characteristics HT7121-2, +2.1V Output Type Ta=25°C Symbol Parameter Test Conditions VIN Conditions — — VIN Input Voltage VOUT Output Voltage 4.1V IOUT=10mA IOUT Output Current 4.1V ∆VOUT Load Regulation 4.1V 1mA≤IOUT≤20mA VDIF Dropout Voltage (Note) Quiescent Current ISS Line Regulation — — IOUT=1mA, ∆VOUT=2% 4.1V No load — 3.1V≤VIN≤30V, IOUT=1mA Temperature Coefficient 4.1V IOUT=10mA, -40°C<Ta<85°C Min. Typ. Max. Unit — — 30 V 2.079 2.100 2.121 V 20 30 — mA — 15 45 mV — 35 100 mV — 2.5 4.0 µA — 0.1 0.2 %/V — ±100 — ppm/°C Note: Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the output voltage from the value at VIN = VOUT+2V with a fixed load. HT7123-2, +2.3V Output Type Ta=25°C Symbol Parameter Test Conditions VIN Conditions — — VIN Input Voltage VOUT Output Voltage 4.3V IOUT=10mA IOUT Output Current 4.3V ∆VOUT Load Regulation 4.3V 1mA≤IOUT≤20mA VDIF Dropout Voltage (Note) ISS Quiescent Current Line Regulation Temperature Coefficient — — IOUT=1mA, ∆VOUT=2% 4.3V No load — 3.3V≤VIN≤30V, IOUT=1mA 4.3V IOUT=10mA, -40°C<Ta<85°C Min. Typ. Max. Unit — — 30 V 2.277 2.300 2.323 V 20 30 — mA — 15 45 mV — 35 100 mV — 2.5 4.0 µA — 0.1 0.2 %/V — ±100 — ppm/°C Note: Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the output voltage from the value at VIN = VOUT+2V with a fixed load. Rev. 1.20 3 June 12, 2014 HT71xx-2 HT7125-2, +2.5V Output Type Ta=25°C Symbol Parameter Test Conditions VIN Conditions — — VIN Input Voltage VOUT Output Voltage 4.5V IOUT=10mA IOUT Output Current 4.5V ∆VOUT Load Regulation 4.5V 1mA≤IOUT≤20mA VDIF Dropout Voltage (Note) ISS Quiescent Current Line Regulation — IOUT=1mA, ∆VOUT=2% 4.5V No load — Temperature Coefficient — 3.5V≤VIN≤30V, IOUT=1mA 4.5V IOUT=10mA, -40°C<Ta<85°C Min. Typ. Max. Unit — — 30 V 2.475 2.500 2.525 V 20 30 — mA — 15 45 mV — 35 100 mV — 2.5 4.0 µA — 0.1 0.2 %/V — ±100 — ppm/°C Note: Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the output voltage from the value at VIN = VOUT+2V with a fixed load. HT7127-2, +2.7V Output Type Ta=25°C Symbol Parameter Test Conditions VIN Conditions — — VIN Input Voltage VOUT Output Voltage 4.7V IOUT=10mA IOUT Output Current 4.7V ∆VOUT Load Regulation VDIF Dropout Voltage ISS Quiescent Current — 4.7V 1mA≤IOUT≤20mA (Note) Line Regulation Temperature Coefficient — IOUT=1mA, ∆VOUT=2% 4.7V No load — 3.7V≤VIN≤30V, IOUT=1mA 4.7V IOUT=10mA, -40°C<Ta<85°C Min. Typ. Max. Unit — — 30 V 2.673 2.700 2.727 V 20 30 — mA — 15 45 mV — 35 100 mV — 2.5 4.0 µA — 0.1 0.2 %/V — ±100 — ppm/°C Note: Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the output voltage from the value at VIN = VOUT+2V with a fixed load. Rev. 1.20 4 June 12, 2014 HT71xx-2 HT7130-2, +3.0V Output Type Ta=25°C Symbol Parameter Test Conditions VIN Conditions — Min. Typ. Max. Unit — — 30 V 2.97 3.00 3.03 V 20 30 — mA VIN Input Voltage — VOUT Output Voltage 5V IOUT Output Current 5V ∆VOUT Load Regulation 5V 1mA≤IOUT≤20mA — 15 45 mV VDIF Dropout Voltage (Note) — IOUT=1mA, ∆VOUT=2% — 35 100 mV ISS Quiescent Current 5V No load — 2.5 4.0 µA Line Regulation — 4V≤VIN≤30V, IOUT=1mA — 0.1 0.2 %/V Temperature Coefficient 5V IOUT=10mA, -40°C<Ta<85°C — ±100 — ppm/°C IOUT=10mA — Note: Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the output voltage from the value at VIN = VOUT+2V with a fixed load. HT7133-2, +3.3V Output Type Ta=25°C Symbol Parameter Test Conditions VIN Conditions — — VIN Input Voltage VOUT Output Voltage 5.3V IOUT=10mA IOUT Output Current 5.3V ∆VOUT Load Regulation VDIF Dropout Voltage ISS Quiescent Current — 5.3V 1mA≤IOUT≤30mA (Note) Line Regulation Temperature Coefficient — IOUT=1mA, ∆VOUT=2% 5.3V No load — 4.3V≤VIN≤30V, IOUT=1mA 5.3V IOUT=10mA, -40°C<Ta<85°C Min. Typ. Max. Unit — — 30 V 3.267 3.300 3.333 V 20 30 — mA — 15 45 mV — 35 55 mV — 2.5 4.0 µA — 0.1 0.2 %/V — ±100 — ppm/°C Note: Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the output voltage from the value at VIN = VOUT+2V with a fixed load. Rev. 1.20 5 June 12, 2014 HT71xx-2 HT7136-2, +3.6V Output Type Ta=25°C Symbol Parameter Test Conditions VIN Conditions — — VIN Input Voltage VOUT Output Voltage 5.6V IOUT=10mA IOUT Output Current 5.6V ∆VOUT Load Regulation 5.6V 1mA≤IOUT≤30mA VDIF Dropout Voltage (Note) ISS Quiescent Current Line Regulation — IOUT=1mA, ∆VOUT=2% 5.6V No load — Temperature Coefficient — 4.6V≤VIN≤30V, IOUT=1mA 5.6V IOUT=10mA, -40°C<Ta<85°C Min. Typ. Max. Unit — — 30 V 3.564 3.600 3.636 V 20 30 — mA — 15 45 mV — 35 55 mV — 2.5 4.0 µA — 0.1 0.2 %/V — ±100 — ppm/°C Note: Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the output voltage from the value at VIN = VOUT+2V with a fixed load. HT7144-2, +4.4V Output Type Ta=25°C Symbol Parameter Test Conditions VIN Conditions — — VIN Input Voltage VOUT Output Voltage 6.4V IOUT=10mA IOUT Output Current 6.4V ∆VOUT Load Regulation VDIF Dropout Voltage ISS Quiescent Current — 6.4V 1mA≤IOUT≤30mA (Note) Line Regulation Temperature Coefficient — IOUT=1mA, ∆VOUT=2% 6.4V No load — 5.4V≤VIN≤30V, IOUT=1mA 6.4V IOUT=10mA, -40°C<Ta<85°C Min. Typ. Max. Unit — — 30 V 4.356 4.400 4.444 V 20 30 — mA — 15 45 mV — 35 55 mV — 2.5 4.0 µA — 0.1 0.2 %/V — ±100 — ppm/°C Note: Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the output voltage from the value at VIN = VOUT+2V with a fixed load. Rev. 1.20 6 June 12, 2014 HT71xx-2 HT7150-2, +5.0V Output Type Ta=25°C Symbol Parameter Test Conditions VIN Conditions — Min. Typ. Max. Unit — — 30 V 4.95 5.00 5.05 V 20 30 — mA VIN Input Voltage — VOUT Output Voltage 7V IOUT Output Current 7V ∆VOUT Load Regulation 7V 1mA≤IOUT≤30mA — 15 45 mV VDIF Dropout Voltage (Note) — IOUT=1mA, ∆VOUT=2% — 35 55 mV ISS Quiescent Current 7V No load — 2.5 4.0 µA Line Regulation — 6V≤VIN≤30V, IOUT=1mA — 0.1 0.2 %/V Temperature Coefficient 7V IOUT=10mA, -40°C<Ta<85°C — ±100 — ppm/°C IOUT=10mA — Note: Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the output voltage from the value at VIN = VOUT+2V with a fixed load. Rev. 1.20 7 June 12, 2014 HT71xx-2 Typical Performance Characteristics Test Condition: Vin=Vout+2V, IOUT=10mA, TJ=25°C, unless otherwise noted Output Voltage vs Input Voltage HT7133-2 3.50 Output voltage(V) Output voltage(V) Iout=10mA 5.15 3.40 3.35 3.30 3.25 3.20 3.15 3.10 HT7150-2 5.20 Iout=10mA 3.45 5.10 5.05 5.00 4.95 4.90 4.85 5 10 15 20 25 4.80 30 6 10 14 Input Voltage (V) 18 22 26 30 Input Voltage (V) Quiescent current (Iout=0mA) vs Temperature HT7133-2 2.50 Vin=30V 2.00 1.50 1.00 0.50 0.00 -40 -30 -20 -10 0 10 20 30 HT7150-2 3.00 Vin=5.3V Quiescent current (uA) Quiescent current(uA) 3.00 40 50 60 70 2.50 Vin=30V 2.00 1.50 1.00 0.50 0.00 80 Vin=7V -40 -30 -20 -10 0 Temperature (OC) 10 20 30 40 50 60 70 80 40 50 60 70 80 Temperature (OC) Output Voltage vs Temperature (Vin=Vout+2V) HT7133-2 3.50 Output voltage(V) Output voltage(V) 3.35 3.30 3.25 3.20 Iout=30mA 5.10 5.05 5.00 4.95 4.90 4.85 3.15 3.10 Iout=10mA 5.15 Iout=30mA 3.40 HT7150-2 5.20 Iout=10mA 3.45 4.80 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 -40 -30 -20 -10 0 Temperature (OC) 10 20 30 Temperature(OC) Output Voltage vs Temperature HT7133-2 3.50 Output voltage(V) Output voltage(V) 3.35 3.30 3.25 3.20 3.15 3.10 Vin=7V 5.15 Vin=30V 3.40 HT7150-2 5.20 Vin=5.3V 3.45 Vin=30V 5.10 5.05 5.00 4.95 4.90 4.85 -40 -30 -20 -10 0 10 20 30 40 50 60 70 4.80 80 Temperature(OC) Rev. 1.20 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 Temperature(OC) 8 June 12, 2014 HT71xx-2 Application Circuits Basic Circuits High Output Current Positive Voltage Regulator Short-Circuit Protection by Tr1 V IN R s T r1 V R 1 C 1 1 0 F IN O U T C 2 1 0 F S in g le p o in t G N D 9 V O U T G N D C o m m o n Rev. 1.20 V C o m m o n June 12, 2014 HT71xx-2 Circuit for Increasing Output Voltage VOUT=VXX (1+R2/R1)+ISS×R2 Circuit for Increasing Output Voltage VOUT=VXX+VD1 Constant Current Regulator IOUT=VXX/RA+ISS Dual Supply Rev. 1.20 10 June 12, 2014 HT71xx-2 Package Information Note that the package information provided here is for consultation purposes only. As this information may be updated at regular intervals users are reminded to consult the Holtek website for the latest version of the package information. Additional supplementary information with regard to packaging is listed below. Click on the relevant section to be transferred to the relevant website page. • Further Package Information (include Outline Dimensions, Product Tape and Reel Specifications) • Packing Meterials Information • Carton information Rev. 1.20 11 June 12, 2014 HT71xx-2 3-pin TO92 Outline Dimensions Symbol A Min. Nom. Max. 0.173 0.180 0.205 B 0.170 — 0.210 C 0.500 0.580 — D — 0.015 BSC — E — 0.010 BSC — F — 0.050 BSC — G — 0.035 BSC — H 0.125 0.142 0.165 Symbol Rev. 1.20 Dimensions in inch Dimensions in mm Min. Nom. Max. A 4.39 4.57 5.21 B 4.32 — 5.33 C 12.70 14.73 — D — 0.38 BSC — E — 2.54 BSC — F — 1.27 BSC — G — 0.89 BSC — H 3.18 3.61 4.19 12 June 12, 2014 HT71xx-2 3-pin SOT89 Outline Dimensions Symbol Dimensions in inch Min. Nom. Max. A 0.173 — 0.181 B 0.053 — 0.072 C 0.090 — 0.102 D 0.035 — 0.047 E 0.155 — 0.167 F 0.014 — 0.019 G 0.017 — 0.022 H — 0.059 BSC — I 0.055 — 0.063 J 0.014 — 0.017 Symbol Rev. 1.20 Dimensions in mm Min. Nom. Max. A 4.40 — 4.60 B 1.35 — 1.83 C 2.29 — 2.60 D 0.89 — 1.20 E 3.94 — 4.25 F 0.36 — 0.48 G 0.44 — 0.56 H — 1.50 BSC — I 1.40 — 1.60 J 0.35 — 0.44 13 June 12, 2014 HT71xx-2 5-pin SOT23-5 Outline Dimensions Symbol A Min. Nom. Max. — — 0.057 0.006 A1 — — A2 0.035 0.045 0.051 b 0.012 — 0.020 C 0.003 — 0.009 D — 0.114 BSC — E — 0.063 BSC — e — 0.037 BSC — e1 — 0.075 BSC — H — 0.110 BSC — L1 — 0.024 BSC — θ 0° — 8° Symbol A Rev. 1.20 Dimensions in inch Dimensions in mm Min. Nom. Max. — — 1.45 0.15 A1 — — A2 0.90 1.15 1.30 b 0.30 — 0.50 C 0.08 — 0.22 D — 2.90 BSC — E — 1.60 BSC — e — 0.95 BSC — e1 — 1.90 BSC — H — 2.80 BSC — L1 — 0.60 BSC — θ 0° — 8° 14 June 12, 2014 HT71xx-2 Copyright© 2014 by HOLTEK SEMICONDUCTOR INC. The information appearing in this Data Sheet is believed to be accurate at the time of publication. However, Holtek assumes no responsibility arising from the use of the specifications described. The applications mentioned herein are used solely for the purpose of illustration and Holtek makes no warranty or representation that such applications will be suitable without further modification, nor recommends the use of its products for application that may present a risk to human life due to malfunction or otherwise. Holtek's products are not authorized for use as critical components in life support devices or systems. Holtek reserves the right to alter its products without prior notification. For the most up-to-date information, please visit our web site at http://www.holtek.com.tw. Rev. 1.20 15 June 12, 2014