Datasheet

For more information, please visit the product page.
Part No: CC-0601
Date: 8/21/2006
Description: magnetic buzzer
Page No: 1 of 4
Unit: mm
Specifications
Rated voltage
1.5 Vo-p
Operating voltage
Mean current
1.0 - 1.7 Vo-p
80 mA max.
Coil resistance
Coil impedance
Sound output
6 ±1 Ω
8Ω
Min. 70 (Typical 77) dBA
Rated frequency
Operating tempurature
Storage tempurature
Dimensions
Weight
Material
Terminal
RoHS
3,000 Hz
-20 ~ +60° C
-30 ~ +70° C
ø6.6 x H3.5 mm
0.4 g
PPO (Black)
Pin type (Au Plating)
yes
Applying rated voltage, 3000 Hz
square wave, ½ duty
Distance at 10cm (A-weight free air).
Applying rated voltage of 3000 Hz, square
wave, ½ duty.
See attached drawing
See attached drawing
Frequency Response Curve
Phone: 800.275.4899
Fax: 503.612.2381
www.cui.com
20050 SW 112th Ave.
Tualatin, OR 97062
For more information, please visit the product page.
Part No: CC-0601
Date: 8/21/2006
Description: magnetic buzzer
Page No: 2 of 4
Unit: mm
Appearance Drawing
Tolerance: ±0.5
Measurement Method
Phone: 800.275.4899
Fax: 503.612.2381
www.cui.com
20050 SW 112th Ave.
Tualatin, OR 97062
For more information, please visit the product page.
Mechanical Characteristics
Item
Solderability 1
Soldering Heat Resistance
Terminal Mechanical Strength
Vibration
Drop Test
Notes:
Part No: CC-0601
Date: 8/21/2006
Description: magnetic buzzer
Page No: 3 of 4
Unit: mm
Test Condition
Lead terminals are immersed in rosin for 5
seconds and then immersed in a solder bath
of +270 ±5°C for 3 ±1 seconds.
Lead terminals are immersed in solder bath
of +260 ±5°C for 3 ±1 seconds.
The force of 9.8 N (1.0 kg) should be applied
to the terminals.
The buzzer will be measured after applying
a vibration amplitude of 1.5 mm with 10 to
55 Hz band of vibration frequency to each of
the 3 perpendicular directions for 2 hours
(6 hours total).
The part is to be dropped from a height of
75 cm onto a 40 mm thick wooden board 3
times in 3 axis (X, Y, Z) for a total of 9 drops.
Evaluation Standard
90% min. of lead terminals should
be covered with fresh solder.
(Except the edge of the terminal.)
No in interference in operation.
Test Condition
The part will be subjected to +70°C for
96 hours.
The part will be subjected to -30°C for
96 hours
The part will be subjected to 10 cycles. One
cycle will consist of:
Evaluation Standard
No damage or cutting off.
After the test, the part should
meet specifications without any
damage to the appearance and
the SPL should be within
±10 dBA of the initial
measurement.
1. Not recommended for wave soldering
Environment Test
Item
High temp. test
Low temp. test
Thermal shock
Temp./Humidity cycle
Phone: 800.275.4899
The part shall be subjected to 10 cycles. One
cycle will be 24 hours and consist of:
Fax: 503.612.2381
www.cui.com
After the test, the part should
meet specifications without any
damage to the appearance or
performance except SPL. After 4
hours at 25°C, the SPL should be
within ±10 dBA of the initial
measurement.
20050 SW 112th Ave.
Tualatin, OR 97062
For more information, please visit the product page.
Part No: CC-0601
Date: 8/21/2006
Description: magnetic buzzer
Page No: 4 of 4
Unit: mm
Reliability Tests
Item
Operating (Life Test)
Test Condition
1. Continuous life test:
The part will be subjected to 72 hours at 45°C
with 1.5 V, 3000 Hz applied.
2. Intermittent life test:
A duty cycle of 1 minute on, 1 minute off, a
minimum of 10,000 times at room temp.
(+25 ±10°C) with 1.5 V, 3000 Hz applied.
Evaluation Standard
After the test, the part should
meet specifications without any
damage to the appearance or
performance except SPL. After 4
hours at 25°C, the SPL should be
within ±10 dBA of the initial
measurement.
Test Conditions
Standard Test Condition
Judgement Test Condition
a) Tempurature: +5 ~ +35°C
a) Tempurature: +25±2°C
b) Humidity: 45 - 85%
b) Humidity: 60 - 70%
c) Pressure: 860 - 1060 mbar
c) Pressure: 860 - 1060 mbar
Packaging
Each minimum package of products will be in a carton box and it should be clearly marked with the Part Number,
Quantity, and Outgoing Inspection Number. There should be no mechanical damage to the products during
transportation and/or in storage.
Phone: 800.275.4899
Fax: 503.612.2381
www.cui.com
20050 SW 112th Ave.
Tualatin, OR 97062
Similar pages