For more information, please visit the product page. date 05/24/2016 page 1 of 4 MODEL: CMT-1614C-120 │ DESCRIPTION: MAGNETIC BUZZER TRANSDUCER FEATURES • externally driven • wave solderable • washable SPECIFICATIONS parameter rated voltage conditions/description Vo-p operating voltage current consumption min at rated voltage, 2,048 Hz square wave, ½ duty at 10 cm (A-weight), rated voltage, 2,048 Hz square wave, ½ duty coil resistance dimensions Vo-p 13.0 Vo-p 80 mA Hz 85 94 dBA 97.8 115.0 132.2 Ø16.0 x 14.0 Ω mm 4.60 material PPS (S-206) terminal pin type (Au plating) operating temperature storage temperature RoHS units 2,048 weight Notes: max 12.0 9.0 0V rated frequency sound pressure level typ g -40 85 °C -40 85 °C max units 260 °C 2011/65/EU 1. All specifications measured at 5~35°C, humidity at 45~85%, under 86~106 kPa pressure, unless otherwise noted. SOLDERABILITY parameter conditions/description wave soldering see recommended wave soldering profile min Soldering Pot: 260±5°C Temperature (°C) 4°C/Sec max Pre-heating 160°C Max Cooling by air A+B=10 Sec Max 4°C/Sec max 120 sec Max Time (sec) cui.com typ For more information, please visit the product page. CUI Inc │ MODEL: CMT-1614C-120 │ DESCRIPTION: MAGNETIC BUZZER TRANSDUCER date 05/24/2016 │ page 2 of 4 MECHANICAL DRAWING units: mm tolerance: ±0.5 mm CMT-1614C-120 CUI CHINA 01 10 ŘņņŌ ıĲġ ıĳġ FREQUENCY RESPONSE CURVE MEASUREMENT METHOD +VDC +2.5V 180Ω TR: 2SC1741AS 0 cui.com Śņłœ ĲıĮĮĮĳıĲı ĲĲĮĮĮĳıĲĲ For more information, please visit the product page. CUI Inc │ MODEL: CMT-1614C-120 │ DESCRIPTION: MAGNETIC BUZZER TRANSDUCER date 05/24/2016 │ page 3 of 4 PACKAGING units: mm Tray Size: 320 x 170 x 28 mm Carton Size: 690 x 390 x 350 mm Tray QTY: 50 pcs per tray Carton QTY: 2,000 pcs per carton ĶıőńŔ Lot No. XXXXXXXXXX Model No. XXXXXXXXXX Quantity. XXXX Pcs Date: DD MM YY MADE IN CHINA G CUI Inc The label is placed on the inner boxes and outer carton. cui.com For more information, please visit the product page. CUI Inc │ MODEL: CMT-1614C-120 │ DESCRIPTION: MAGNETIC BUZZER TRANSDUCER date 05/24/2016 │ page 4 of 4 REVISION HISTORY rev. description date 1.0 initial release 03/31/2016 1.01 updated mechanical drawing 05/24/2016 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com [email protected] CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.