VO1400AEF www.vishay.com Vishay Semiconductors 1 Form A Solid-State Relay FEATURES • Maximum RON 5 Ω A 1 K 2 4 • Load voltage 60 V S1 • Load current 100 mA 3 • Isolation test voltage 3750 VRMS S2 • Small 4 pin SOP package • Clean bounce free switching • TTL / CMOS compatible input i179066_6 • High reliability hybrid receptor • Available on tape and reel DESCRIPTION • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 The VO1400AEF is an optically isolated 1 form A solid-state relay in a surface mount 4 pin SOP package. AGENCY APPROVALS APPLICATIONS • UL, file no. E52744 • Security systems • cUL, file no. E52744 • Instrumentation • DIN EN 60747-5-5 (VDE 0884-5) • Industrial controls • FIMKO EN 60950-1 • CQC GB8898-2011 ORDERING INFORMATION V O 1 4 0 PART NUMBER 0 A ELECTRICAL VARIATION E F PACKAGE CONFIG. PACKAGE T # SOP TAPE AND REEL UL, cUL, CQC, VDE, FIMKO SOP-4, tape and reel VO1400AEFTR SOP-4, tape and reel (product rotated in tape) VO1400AEFT1 ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER CONDITIONS SYMBOL VALUE UNIT LED continuous forward current IF 50 mA LED reverse voltage VR 5 V INPUT OUTPUT DC or peak AC load voltage VL 60 V Load current AC peak IL 100 mA ILPK 350 mA Total power dissipation Pdiss 120 mW Ambient temperature range Tamb -40 to +85 °C Storage temperature range Tstg -40 to +125 °C Tsld 260 °C Peak load current t = 10 ms SSR Soldering temperature t ≤ 10 s max. Notes • Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. Rev. 1.7, 14-Jul-15 Document Number: 84724 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO1400AEF www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATING CURVE 120 140 IL - Load Current (mA) ISI - Input Safety Current (mA) 160 120 100 80 60 40 100 20 0 80 60 40 20 0 -50 -25 0 25 50 -40 75 100 125 150 175 Tamb - Ambient Temperature (°C) -20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 1 - Input Safety Current vs. Ambient Temperature Fig. 3 - Load Current vs. Ambient Temperature PSO - Output Safety Power (mW) 500 400 300 200 100 0 -50 -25 0 25 50 75 100 125 150 175 Tamb - Ambient Temperature (°C) Fig. 2 - Output Safety Power vs. Ambient Temperature ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT LED forward current, switch turn-on IL = 100 mA, VL ≤ 0.5 V, t = 10 ms IFon 0.3 0.8 3.2 mA LED forward current, switch turn-off VL = 60 V IFoff 100 400 - μA LED reverse current VR = 5 V IR - 0.001 10 μA LED forward voltage IF = 5 mA VF 0.8 1.1 1.4 LED reverse voltage IR = 10 μA VR 5 40 IF = 10 mA, IL = 100 mA RON - 2.3 5 Ω IF = 0 mA, VL = 60 V ILEAK - 0.002 1 μA INPUT V V OUTPUT On-resistance Off-state leakage current Note • Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements. Rev. 1.7, 14-Jul-15 Document Number: 84724 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO1400AEF www.vishay.com Vishay Semiconductors SWITCHING CHARACTERISTICS PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Turn-on time IF = 10 mA, VL = 20 V, IL = 100 mA ton - 52 500 μs Turn-off time IF = 10 mA, VL = 20 V, IL = 100 mA toff - 36 500 μs VL 1.25 ms Input Output ton toff Output 90 % 10 % 20991-2 Fig. 4 - Timing Test Circuit and Waveforms SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION Climatic classification According to IEC 68 part 1 Pollution degree According to DIN VDE 0109 Comparative tracking index Maximum rated withstanding isolation voltage SYMBOL VALUE UNIT 40/85/21 2 Insulation group IIIa CTI 175 According to UL1577, t = 1 min VISO 3750 VRMS Maximum transient isolation voltage According to DIN EN 60747-5-5 VIOTM 6000 Vpeak Maximum repetitive peak isolation voltage According to DIN EN 60747-5-5 VIORM 707 Vpeak Tamb = 25 °C, VIO = 500 V RIO ≥ 1012 Ω Tamb = 100 °C, VIO = 500 V RIO ≥ 1011 Ω Tamb = TS, VIO = 500 V RIO ≥ 109 Ω PSO 400 mW Input safety current ISI 150 mA Input safety temperature TS 165 °C Insulation resistance Output safety power Clearance distance Measured from input terminals to output terminals, shortest distance through air ≥5 mm Creepage distance Measured from input terminals to output terminals, shortest distance path along body ≥5 mm Input to output test voltage, method B VIORM x 1.875 = VPR, 100 % production test with tM = 1 s, partial discharge < 5 pC VPR 1326 Vpeak Input to output test voltage, method A VIORM x 1.6 = VPR, 100 % sample test with tM = 10 s, partial discharge < 5 pC VPR 1131 Vpeak Note • This SSR is suitable for “safe electrical insulation” only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits. Rev. 1.7, 14-Jul-15 Document Number: 84724 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO1400AEF www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 0.020 ILEAK - Leakage Current (μA) IF - Forward Current (mA) 100 T = 85 °C T = 25 °C 10 T = -40 °C 1 VLOAD = 60 V 0.015 0.010 0.005 0 0.6 0.8 1.0 1.2 1.4 -40 1.6 VF - Forward Voltage (V) 2.5 20 40 60 80 100 0.10 IL = 100 mA IL = 100 mA, tp = 5 ms ton - Turn-On Time (ms) IF - Forward Current for Switch Turn-On (mA) 0 Fig. 8 - Leakage Current vs. Ambient Temperature Fig. 5 - Forward Current vs. Forward Voltage 2.0 1.5 1.0 0.5 0.0 0.08 0.06 0.04 0.02 0 -40 -20 0 20 40 60 80 100 5 10 15 20 IF - Forward Current (mA) Tamb - Ambient Temperature (°C) Fig. 9 - Turn-On Time vs. Forward Current Fig. 6 - Forward Current for Switch Turn-On vs. Ambient Temperature 0.10 6 IL = 100 mA IL = 100 mA, tp = 5 ms toff - Turn-Off Time (ms) Ron - On-Resistance (Ω) -20 Tamb - Ambient Temperature (°C) 5 IF = 5 mA 4 3 2 IF = 10 mA 0.08 0.06 0.04 0.02 0 1 -40 -20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 7 - On-Resistance vs. Ambient Temperature Rev. 1.7, 14-Jul-15 5 10 15 20 IF - Forward Current (mA) Fig. 10 - Turn-Off Time vs. Forward Current Document Number: 84724 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO1400AEF www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS (in millimeters) 6.95 ± 0.25 4.92 max. 5.35 typ. 4.42 ± 0.25 2.12 ± 0.20 0.20 ± 0.10 4.57 ± 0.25 0.05 ± 0.05 0.41 ± 0.10 2.54 nom. 4 5.0 min. 0.50 ± 0.15 Leads coplanarity 0.1 max. 3 2.54 Recommended footprint 1.15 1 2 5.10 0.90 Pin one I.D. 7.40 Fig. 11 - Package Drawings Rev. 1.7, 14-Jul-15 Document Number: 84724 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO1400AEF www.vishay.com Vishay Semiconductors PACKAGE MARKING 1400 V YWW 68 Fig. 12 - VO1400AEF Note • Tape and reel suffix (TR) is not part of the package marking. TAPE AND REEL INFORMATION (in millimeters) 2.0 ± 0.1 4.0 ± 0.1 1.5 ± 0.1 Pin 1 1.75 ± 0.1 0.35 ± 0.05 5.5 ± 0.1 12.0 ± 0.3 7.33 ± 0.1 7.33 ± 0.1 8.0 ± 0.1 4.72 ± 0.1 CL 1.5 ± 0.1 2.36 ± 0.1 2.66 ± 0.1 Note: • Cummulative tolerance of 10 spocket holes is 0.20 Fig. 13 - VO1400AEFT (2000 pieces on reel) Pin 1 2.0 ± 0.1 4.0 ± 0.1 1.75 ± 0.1 1.5 ± 0.1 0.32 ± 0.05 5.5 ± 0.1 12.0 ± 0.3 4.72 ± 0.1 4.72 ± 0.1 CL 2.36 ± 0.1 7.33 ± 0.1 12.0 ± 0.1 2.66 ± 0.1 1.5 ± 0.1 Note: • Cummulative tolerance of 10 spocket holes is 0.20 Fig. 14 - VO1400AEFT1 (1000 pieces on reel) Rev. 1.7, 14-Jul-15 Document Number: 84724 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VO1400AEF www.vishay.com Vishay Semiconductors SOLDER PROFILES HANDLING AND STORAGE CONDITIONS ESD level: HBM class 2 300 Temperature (°C) max. 260 °C 245 °C 255 °C 240 °C 217 °C 250 Floor life: unlimited Conditions: Tamb < 30 °C, RH < 85 % Moisture sensitivity level 1, according to J-STD-020 200 max. 30 s 150 max. 100 s max. 120 s 100 max. ramp down 6 °C/s 50 max. ramp up 3 °C/s 0 0 19841 50 100 150 200 250 300 Time (s) Fig. 15 - Lead (Pb)-free Reflow Solder Profile According to J-STD-020 for SMD Devices Rev. 1.7, 14-Jul-15 Document Number: 84724 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000