UNISONIC TECHNOLOGIES CO., LTD MBR760 Preliminary DIODE 7.5A SCHOTTKY BARRIER RECTIFIER DESCRIPTION The UTC MBR760 is a 7.5A schottky barrier rectifier, it uses UTC’s advanced technology to provide customers with low power loss, low forward voltage drop, high efficiency and high current capability. The UTC MBR760 is suitable for free wheeling, high frequency inverters, polarity protection application. FEATURES * Low power loss * Low forward voltage drop * High current capability * High surge capability * High efficiency SYMBOL 2 1 A K ORDERING INFORMATION Ordering Number Lead Free Halogen Free MBR760L-TA2-T MBR760G-TA2-T Note: Pin Assignment: A: Anode K: Cathode Package TO-220-2 Pin Assignment 1 2 K A Packing Tube MARKING www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 3 QW-R202-030.a MBR760 Preliminary DIODE ABSOLUTE MAXIMUM RATINGS (TA=+25°C unless otherwise specified) Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. PARAMETER SYMBOL RATINGS UNIT DC Blocking Voltage VR 60 V Working Peak Reverse Voltage VRWM 60 V Peak Repetitive Reverse Voltage VRRM 60 V RMS Reverse Voltage VR(RMS) 42 V Average Rectified Output Current e(Note 1) TC=+125°C IO 7.5 A Non-Repetitive Peak Forward Surge Current 8.3ms Single IFSM 150 A Half Sine-Wave Superimposed on Rated Load Voltage Rate of Change (Rated VR) dV/dt 10000 V/us Operating Temperature TJ -65~+150 °C Storage Temperature TSTG -65~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL CHARACTERISTICS PARAMETER Junction to Case (Note 1) SYMBOL θJC RATINGS 3.5 UNIT °C/W ELECTRICAL CHARACTERISTICS (TA =+25°C unless otherwise specified.) PARAMETER Forward Voltage Drop SYMBOL VFM TEST CONDITIONS IF=7.5A, TC=25°C IF=7.5A, TC=125°C TC=25°C TC=125°C Peak Reverse Current at Rated DC Blocking IRM Voltage Junction Capacitance (Note 2) CJ Notes: 1. Thermal resistance junction to case mounted on heatsink 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT 0.72 V 0.67 V 1.0 mA 50 mA 400 pF 2 of 3 QW-R202-030.a MBR760 Preliminary DIODE UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R202-030.a