Datasheet

UNISONIC TECHNOLOGIES CO., LTD
U74LVC07A
CMOS IC
HEX BUFFERS WITH
OPEN-DRAIN OUTPUTS

DESCRIPTION
The U74LVC07A contain six independent buffers with open
drain outputs. The outputs are open-drain and can be connected to
other open-drain outputs to implement active-LOW wired-OR or
active-HIGH wired-AND functions
Inputs can be driven from 1.8V, 2.5V, 3.3V, or 5V devices. This
feature allows the use of these devices as translators in a
mixed-system environment.

FEATURES
* Operate from 1.65V to 5.5V
* Inputs and open-drain outputs accept voltages to 5.5V
* Direct interface with TTL levels
* Ioff supports partial-power-down mode

ORDERING INFORMATION
Ordering Number
U74LVC07AG-S14-R
U74LVC07AG-P14-R

Package
SOP-14
TSSOP-14
Packing
Tape Reel
Tape Reel
MARKING
www.unisonic.com.tw
Copyright © 2014 Unisonic Technologies Co., Ltd
1 of 5
QW-R126-010.A
U74LVC07A

PIN CONFIGURATION

FUNCTION TABLE(each buffer)
CMOS IC
INPUT(A)
OUTPUT(Y)
H
Z
L
L
Note: H: HIGH voltage level; L: LOW voltage level; Z=high-impedance OFF-state.

LOGIC DIAGRAM(each inverter)
Logic symbol
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 5
QW-R126-010.A
U74LVC07A

CMOS IC
ABSOLUTE MAXIMUM RATING (TA =25°C, unless otherwise specified)
PARAMETER
SYMBOL
RATINGS
Supply Voltage
VCC
-0.5 ~ +6.5
Input Voltage
VIN
-0.5 ~ +6.5
Output Voltage
VOUT
-0.5 ~ VCC+0.5
VCC or GND Current
ICC
±100
Continuous Output Current (VOUT=0 to VCC)
IOUT
50
Input Clamp Current (VIN<0)
IIK
-50
Output Clamp Current (VOUT<0)
IOK
-50
Storage Temperature Range
TSTG
-65 ~ +150
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.

RECOMMENDED OPERATING CONDITIONS
PARAMETER
Supply Voltage
Input Voltage
Output Voltage
Operating Temperature
SYMBOL
VCC
VIN
VOUT
TA
Low-level Output Current

UNIT
V
V
V
mA
mA
mA
mA
°C
IOL
TEST CONDITIONS
Operating
MIN
1.65
0
0
-40
VCC=1.65V
VCC=2.3V
VCC=2.7V
VCC=3V
VCC=4.5V
TYP
MAX
5.5
5.5
VCC
85
4
12
12
24
24
UNIT
V
V
V
°C
mA
mA
mA
mA
mA
THERMAL DATA
PARAMETER
Junction to Ambient
SYMBOL
SOP-14
TSSOP-14
θJA
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
RATINGS
86
113
UNIT
°C/W
°C/W
3 of 5
QW-R126-010.A
U74LVC07A

CMOS IC
ELECTRICAL CHARACTERISTICS (TA =25°C, unless otherwise specified)
PARAMETER
High-level Input Voltage
SYMBOL
VIH
Low-level Input Voltage
VIL
Low-Level Output Voltage
VOL
Input Leakage Current
Power OFF Leakage Current
Quiescent Supply Current
II(LEAK)
Ioff
ICC
Additional Quiescent Supply
Current Per Input Pin
∆ICC
Input Capacitance
CI

MIN
0.65×VCC
1.7
2
0.7×VCC
TYP
MAX
0.35×VCC
0.7
0.8
0.3×VCC
0.2
0.45
0.7
0.4
0.55
0.55
±5
±10
UNIT
V
V
V
V
V
V
V
V
V
V
V
V
V
μA
μA
10
μA
500
μA
5
pF
SWITCHING CHARACTERISTICS (TA =25°C, unless otherwise specified)
PARAMETER
SYMBOL
Propagation delay from input
(nA) to output(nY)

TEST CONDITIONS
VCC=1.65V ~ 1.95V
VCC=2.3V ~ 2.7V
VCC=2.7V ~ 3.6V
VCC=4.5V ~ 5.5V
VCC=1.65V ~ 1.95V
VCC=2.3V ~ 2.7V
VCC=2.7V ~ 3.6V
VCC=4.5V ~ 5.5V
VCC=1.65 ~ 5.5V, IOL=100μA
VCC=1.65V, IOL=4mA
VCC=2.3V, IOL=12mA
VCC=2.7V, IOL=12mA
VCC=3.0V, IOL=24mA
VCC=4.5V, IOL=32mA
VIN=5.5V or GND, VCC=3.6V
VIN or VOUT=5.5V, VCC=0V
VIN= VCC or GND, IOUT=0
VCC=3.6V
VCC=2.7 ~ 3.6V, IOUT=0
One input at VCC-0.6V, Other
inputs at VCC or GND
VIN= VCC or GND, VCC=3.3V
tPLZ
tPZL
TEST CONDITIONS
VCC=1.8±0.15V,CL=30pF, RL=1KΩ
VCC=2.5±0.2V,CL=30pF, RL=500Ω
VCC=2.7V,CL=50pF, RL=500Ω
VCC=3.3±0.3V,CL=50pF, RL=500Ω
VCC=5±0.5V,CL=50pF, RL=500Ω
MIN
1
1
TYP
MAX
5.6
3.4
3.3
3.6
2.6
UNIT
ns
ns
ns
ns
ns
TYP
1.8
2.0
2.5
MAX
UNIT
pF
pF
pF
1
1
OPERATING CHARACTERISTICS (TA =25°C, unless otherwise specified)
PARAMETER
SYMBOL
Power Dissipation Capacitance
Per Inverter
CPD
TEST CONDITIONS
VCC=1.8±0.15V, f=10MHZ
VCC=2.5±0.2V, f=10MHZ
VCC=3.3±0.3V, f=10MHZ
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN
4 of 5
QW-R126-010.A
U74LVC07A

CMOS IC
TEST CIRCUIT AND WAVEFORMS
S
From Output
RL
CL
RL
Inputs
VCC
1.8V±0.15V
2.5V±0.2V
2.7V
3.3V±0.3V
5V±0.5V
VIN
VCC
VCC
2.7V
2.7V
Vcc
VLOAD
tR, tF
≤2ns
≤2ns
≤2.5ns
≤2.5ns
≤2.5ns
VM
VLOAD
V∆
CL
RL
VCC/2
VCC/2
1.5V
1.5V
VCC/2
2 x VCC
2 x VCC
2 x VCC
2 x VCC
2 x VCC
0.15V
0.15V
0.3V
0.3V
0.3V
30pF
30pF
50pF
50pF
50pF
1KΩ
500Ω
500Ω
500Ω
500Ω
Notes: 1. CL includes probe and jig capacitance.
2. All input pulses are supplied by generators having the following characteristics: PRR ≤10MHz, ZO = 50Ω.
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 5
QW-R126-010.A
Similar pages