Datasheet

UNISONIC TECHNOLOGIES CO., LTD
ES3J
DIODE
SURFACE MOUNT SUPER FAST
RECTIFIER

DESCRIPTION
The UTC ES3J is a surface mount super fast rectifier, it uses
UTC’s advanced technology to provide customers with high forward
surge current and low reverse leakage, etc.
The UTC ES3J is suitable for surface mounted applications.
+
SMC
(JEDEC DO-214AB)

FEATURES
* Low reverse leakage
* High forward surge current capability

SYMBOL

ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
ES3JL-SMC-R
ES3JG-SMC-R
Note: Pin Assignment: A: Anode
K: Cathode

Package
SMC
Pin Assignment
1
2
K
A
Packing
Tape Reel
MARKING
Cathode Band for
uni-directional Only
UTC
ES3J
Date Code
L: Lead Free
G: Halogen Free
www.unisonic.com.tw
Copyright © 2015 Unisonic Technologies Co., Ltd
1 of 3
QW-R202-035.A
ES3J

DIODE
ABSOLUTE MAXIMUM RATINGS
Ratings at 25°C ambient temperature unless otherwise specified.
Single phase half-wave 60Hz, resistive or inductive load, for capacitive load current derate by 20%.
PARAMETER
SYMBOL
RATINGS
UNIT
Working Peak Reverse Voltage
VRWM
600
V
Repetitive Peak Reverse Voltage
VRRM
600
V
Maximum RMS Reverse Voltage
VRMS
420
V
DC Blocking Voltage
VR
600
V
Average Rectified Output Current (TA=55°C)
IO
3.0
A
Peak Forward Surge Current 8.3ms Single Half
IFSM
100
A
Sine-Wave Superimposed on Rated Load
Junction Temperature
TJ
-55~+150
°C
Storage Temperature
TSTG
-55~+150
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.

THERMAL DATA
PARAMETER
Junction to Ambient (Note 2

SYMBOL
θJA
RATINGS
40
UNIT
°C/W
ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Single phase half-wave 60Hz, resistive or inductive load, for capacitive load current derate by 20%.
PARAMETER
SYMBOL
TEST CONDITIONS
MIN TYP MAX UNIT
Instantaneous Forward Voltage
VFM
IF=2.0A
1.5
V
5
μA
TA=25°C
DC Reverse Current at Rated DC Blocking
IRM
Voltage
TA=100°C
50
μA
Reverse Recovery Time (Note 1)
trr
50
ns
Notes: 1. Reverse recovery condition IF=0.5A, IR=1.0A, Irr=0.25A.
2. P.C.B. mounted with 0.2×0.2” (5.0×5.0mm) copper pad areas.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 3
QW-R202-035.A
ES3J
DIODE
TYPICAL CHARACTERISTICS

Maximum Non-Repetitive Peak Forward Surge Current
3.0
150
2.5
Peak Forward Surge Current (A)
Average Forward Rectified Current (A)
Forward Current Derating Curve
2.0
1.5
1.0
Single Phase
0.5 Half Wave
Resistive or
inductive Load
0
0
25
50
75
100
125
150
120
90
60
30
175
0
Ambient Temperature (°C)
8.3ms Single
Half Sine-Wave
(JEDEC Method)
10
1
Typical Junction Capacitance
Typical Instantaneous Forward Characteristics
100
TJ=25°C
Pulse Width=300s
1% Duty Cycle
TJ=25°C
Junction Capacitance (pF)
Instantaneous Forward Current (A)
100
10
1
0.1
0.6
0.8
1.0
1.2
100
Number of Cycles aT 60Hz
1.4
1.6
1.8
2.0
Instantaneous Forward Voltage (V)
10
10
1
TJ=25°C
100
Reverse Voltage (V)
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 3
QW-R202-035.A
Similar pages