For more information, please visit the product page. date 06/05/2012 page 1 of 3 SERIES: SJ-4351X │ DESCRIPTION: 3.5 MM AUDIO JACK FEATURES • PCB mount • plastic bushing • low profile design RoHS PART NUMBER KEY SJ - 4351 X Base Number Switch Options 4 = no switch 5TS = tip switch SPECIFICATIONS parameter conditions/description min rated input voltage typ 16 rated input current contact resistance* between terminal and mating plug between terminal in a closed circuit insulation resistance at 500 Vdc voltage withstand at 50/60Hz for 1 minute 0.4 -25 life Notes: Vdc mA 50 30 mΩ mΩ 500 Vac 3 kg 500 g MΩ any direction for 10 seconds operating temperature units 300 100 insertion/withdrawl force terminal strength max 85 5,000 °C cycles *When measured at a current of less than 100 mA / 1 kHz SOLDERABILITY parameter conditions/description min typ max units wave soldering dipped in solder pot for 5±0.5 seconds at 255 260 265 °C cui.com For more information, please visit the product page. CUI Inc │ SERIES: SJ-4351X │ DESCRIPTION: 3.5 MM AUDIO JACK date 06/05/2012 │ page 2 of 3 MECHANICAL DRAWING units: mm[inches] TOLERANCE: X.X ±0.2mm X.XX ±0.1mm X.XXX ±0.05mm 4.9 0.193 5.3 0.209 4.7 0.184 4.3 0.169 4.5 0.177 MATERIAL PLATING terminal 1 phosphor bronze gold terminal 2 titanium copper tin terminal 3 phosphor bronze tin terminal 4 phosphor bronze tin terminal 5 brass tin plastic PA66 14.0 0.551 0.3 3.0 0.118 5.0 0.197 2.25 0.089 0.2 1.00 0.039 (TYP) 2.0 0.079 0.3 3.6 0.142 2.5 0.098 0.80 0.031 (5 PLCS) 3.5 0.138 6.00 0.236 7.9 0.311 0.3 1.30 0.051 4.50 0.177 2.9 0.114 0.3 11.0 0.433 1 1.000 0.039 (2 PLCS) 4 3.20 0.126 4.80 0.189 3 5 4.50 0.177 2 4 3.60 0.142 7.90 0.311 3.6 0.142 5 3 4.8 0.189 1.0 0.039 PCB Edge 2.90 0.114 2 4.5 0.177 3.2 0.126 1 11.0 0.433 0.3 1.10 0.043 (7 PLCS) PCB LAYOUT TOP VIEW NOTE: Tolerance for PCB Layout is ± 0.05mm Model No. SJ-43514 SJ-43515TS 4 2 Schematic 3 4 2 5 3 1 1 PIN 14 Ø 3.5 MATING PLUG cui.com 1 sleeve sleeve 2 tip tip 3 ring 1 ring 1 4 ring 2 ring 2 5 NP tip switch For more information, please visit the product page. CUI Inc │ SERIES: SJ-4351X │ DESCRIPTION: 3.5 MM AUDIO JACK date 06/05/2012 │ page 3 of 3 REVISION HISTORY rev. description date 1.0 initial release 05/01/2006 1.01 new template applied 02/21/2012 1.02 pin numbering changed 03/09/2012 1.03 added notch to pcb layout 04/05/2012 updated drawing 06/05/2012 1.04 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com [email protected] CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.