UNISONIC TECHNOLOGIES CO., LTD MBR2100 Preliminary DIODE SCHOTTKY BARRIER RECTIFIER DESCRIPTION The UTC MBR2100 is a schottky barrier rectifier, it uses UTC’s advanced technology to provide customers with low forward voltage drop, high current capability and high efficiency, etc. The UTC MBR2100 is suitable for free wheeling, high frequency inverters, polarity protection application. FEATURES * Low forward voltage drop * High efficiency * High surge capability SYMBOL ORDERING INFORMATION Ordering Number MBR2100G-CA2-R Note: Pin assignment: A: Anode K: Cathode Package SOD-123 Pin Assignment 1 2 A K Packing Tape Reel MARKING www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 3 QW-R202-051.a MBR2100 Preliminary DIODE ABSOLUTE MAXIMUM RATINGS (TA=25°C unless otherwise specified) Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. PARAMETER SYMBOL RATINGS UNIT DC Blocking Voltage VRM 100 V Working Peak Reverse Voltage VRWM 100 V Repetitive Peak Reverse Voltage VRRM 100 V Average Rectified Output Current IO 2.0 A Non-Repetitive Peak Forward Surge Current: 8.3ms IFSM 40 A Single Half Sine-Wave Superimposed on Rated Load Operating Junction Temperature TJ -65~+150 °C Storage Temperature TSTG -65~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL CHARACTERISTICS PARAMETER SYMBOL θJA Junction to Ambient RATINGS 625 UNIT °C/W ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS IF=2.0A TJ=25°C Forward Voltage Drop (Note 3) VF IF=2.0A, TJ=125°C Peak Reverse Current at Rated DC TJ=25°C, VR=100V IR Blocking Voltage TJ=125°C, VR=100V Notes: 1. Measured at ambient temperature at a distance of 9.5mm from the case. 2. Minimum Pad Area. 3. Pulse test: 300μs pulse width, duty cycle 2%. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT 0.79 V 0.69 V 100 μA 10 mA 2 of 3 QW-R202-051.a MBR2100 Preliminary DIODE UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R202-051.a