Datasheet

UNISONIC TECHNOLOGIES CO., LTD
MGBR10L120
Preliminary
DIODE
DUAL MOS GATED BARRIER
RECTIFIER

DESCRIPTION
The UTC MGBR10L120 is a dual mos gated barrier
rectifiers, it uses UTC’s advanced technology to provide
customers with low forward voltage drop and high switching
speed, etc.

FEATURES
* Low forward voltage drop
* High switching speed

SYMBOL

ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
MGBR10L120L-T27-R
MGBR10L120G-T27-R
Note: Pin Assignment: A: Anode K: Common Cathode

Package
TO-277
Pin Assignment
1
2
3
A
K
A
Packing
Tape Reel
MARKING
www.unisonic.com.tw
Copyright © 2015 Unisonic Technologies Co., Ltd
1 of 3
QW-R204-054.a
MGBR10L120

Preliminary
DIODE
ABSOLUTE MAXIMUM RATINGS (TA=25°C unless otherwise specified)
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
PARAMETER
SYMBOL
RATINGS
UNIT
DC Blocking Voltage
VRM
120
V
Working Peak Reverse Voltage
VRWM
120
V
Peak Repetitive Reverse Voltage
VRRM
120
V
Average Rectified Output Current
TC=125°C
IO
10
A
Non-Repetitive Peak Forward Surge Current 8.3ms
IFSM
160
A
Single Half Sine-Wave Superimposed on Rated Load
Operating Junction Temperature
TJ
-65~+150
°C
Storage Temperature
TSTG
-65~+150
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.

THERMAL CHARACTERISTICS
PARAMETER
Junction to Ambient
Junction to Case

SYMBOL
θJA
θJC
RATINGS
73
13
UNIT
°C/W
°C/W
ELECTRICAL CHARACTERISTICS (TA =25°C unless otherwise specified)
PARAMETER
Reverse Breakdown Voltage (Note 1)
SYMBOL
TEST CONDITIONS
V(BR)R
IR=0.50mA
IF=10A, TJ=25°C
Forward Voltage Drop
VFM
IF=10A, TJ=125°C
VR=120V, TJ=25°C
Leakage Current (Note 1)
IRM
VR=120V, TJ=125°C
Notes: 1. Short duration pulse test used to minimize self-heating effect.
2. Thermal resistance junction to case mounted on heatsink.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN
120
TYP MAX UNIT
V
0.82
V
0.70
V
400 μA
30
mA
2 of 3
QW-R204-054.a
MGBR10L120
Preliminary
DIODE
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 3
QW-R204-054.a