Datasheet

UNISONIC TECHNOLOGIES CO., LTD
MB05FU THRU MB10FU
SCHOTTKY BRIDGE
1.0A SCHOTTKY BRIDGE
RECTIFIER

DESCRIPTION
The UTC MB05FU THRU MB10FU is a schottky bridge rectifiers,
it uses UTC’s advanced technology to provide customers with low
forward voltage drop and high current capability, etc.
The UTC MB05FU THRU MB10FU is suitable for surface mount
application.

-
+
MBF
FEATURES
* Low forward voltage drop
* High current capability
* High surge current capability
* Designed for Surface Mount Application

ORDERING INFORMATION
Ordering Number
MB05FUL-MBF-R
MB1FUL-MBF-R
MB2FUL-MBF-R
MB4FUL-MBF-R
MB6FUL-MBF-R
MB8FUL-MBF-R
MB10FUL-MBF-R

Package
MBF
MBF
MBF
MBF
MBF
MBF
MBF
Packing
Tape Reel
Tape Reel
Tape Reel
Tape Reel
Tape Reel
Tape Reel
Tape Reel
MARKING
www.unisonic.com.tw
Copyright © 2015 Unisonic Technologies Co., Ltd
1 of 4
QW-R202-039.B
MB05FU THRU MB10FU

SCHOTTKY BRIDGE
ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified)
Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%.
RATINGS
PARAMETER
SYMBOL
UNIT
MB05FU MB1FU MB2FU MB4FU MB6FU MB8FU MB10FU
Peak Repetitive Reverse Voltage
VRRM
50
100
200
400
600
800
1000
V
Working Peak Reverse Voltage
VRWM
50
100
200
400
600
800
1000
V
DC Blocking Voltage
VDC
50
100
200
400
600
800
1000
V
RMS Reverse Voltage
VRMS
35
70
140
280
420
560
700
V
Average Forward
TA=40°C
IO
1.0
A
Rectified Current
Non-Repetitive Peak Forward Surge
Current, 8.3ms Single Half
IFSM
35
A
Sine-Wave Superimposed on Rated
Load (JEDEC Method)
Operating Junction Temperature
TJ
-55~+150
°C
Range
Storage Temperature Range
TSTG
-55~+150
°C
Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. Mounted on glass epoxy pc board with 1.3mm2 solder pad.
3. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
4.Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B with
0.5×0.5''(13×13mm)copper pads.

THERMAL DATA
PARAMETER
Junction to Ambient (Note 3)

SYMBOL
θJA
RATINGS
60
UNIT
°С/W
ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted)
PARAMETER
Instantaneous Forward Voltage
DC Reverse Current at Rated DC Blocking
Voltage
Typical Junction Capacitance (Note 3)
SYMBOL
VF
IR
CJ
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
TEST CONDITIONS
IF=1.0A
TJ=25°C
TJ=125°C
MIN
TYP MAX UNIT
1.1
V
5.0
μA
500 μA
25
pF
2 of 4
QW-R202-039.B
MB05FU THRU MB10FU

SCHOTTKY BRIDGE
TYPICAL CHARACTERISTICS
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 4
QW-R202-039.B
MB05FU THRU MB10FU
SCHOTTKY BRIDGE
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
4 of 4
QW-R202-039.B
Similar pages