UNISONIC TECHNOLOGIES CO., LTD ABS2 THRU ABS10 SCHOTTKY BRIDGE 0.8A SCHOTTKY BRIDGE RECTIFIER DESCRIPTION The UTC ABS2 THRU ABS10 is a schottky bridge rectifiers, it uses UTC’s advanced technology to provide customers with high surge current capability and low forward voltage drop, etc. The UTC ABS2 THRU ABS10 is suitable for surface mount application. - + ABS FEATURES * Glass passivated die construction * Low forward voltage drop * High current capability * High surge current capability * Designed for surface mount application SYMBOL ORDERING INFORMATION Ordering Number ABS2L-ABS-R ABS4L-ABS-R ABS6L-ABS-R ABS8L-ABS-R ABS10L-ABS-R Package ABS ABS ABS ABS ABS Packing Tape Reel Tape Reel Tape Reel Tape Reel Tape Reel MARKING www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 3 QW-R202-046.B ABS2 THRU ABS10 SCHOTTKY BRIDGE ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified) Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. PARAMETER SYMBOL ABS2 200 200 200 140 ABS4 400 400 400 280 RATINGS ABS6 600 600 600 420 0.5 0.8 ABS8 800 800 800 560 ABS10 1000 1000 1000 700 UNIT Peak Repetitive Reverse Voltage VRRM V Working Peak Reverse Voltage VRWM V DC Blocking Voltage VDC V RMS Voltage VRMS V Average Rectified Output TA=30°C (Note 2) A IO Current TA=30°C (Note 3) A Peak Forward Surge Current, 8.3ms Single IFSM 30 A Half Sine-Wave Superimposed on Rated Load Operating Junction Temperature Range TJ -55~+150 °C Storage Temperature Range TSTG -55~+150 °C Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. Mounted on glass epoxy pc board with 1.3mm2 solder pad. 3. Mounted on aluminum substrate PC board with 1.3mm2 solder pad. THERMAL DATA PARAMETER SYMBOL Junction to Ambient θJA Note: Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. RATINGS 62.5 UNIT °С/W ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) PARAMETER Instantaneous Forward Voltage (Note 1) DC Reverse Current at Rated DC Blocking Voltage (Note 2) SYMBOL VF IR UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TEST CONDITIONS IF=0.4A TJ=25°C TJ=125°C MIN TYP MAX UNIT 0.95 V 5.0 μA 500 μA 2 of 3 QW-R202-046.B ABS2 THRU ABS10 SCHOTTKY BRIDGE TYPICAL CHARACTERISTICS UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R202-046.B