6

6
www.vishay.com
Vishay Spectrol
Snap-On Panel Mount Adapters
Vishay Spectrol’s standard 3/4" and 1 - 1/4" rectangular trimming potentiometers, the Models 43 and 70, may be
easily panel mounted through the use of Vishay Spectrol Model 6 panel mount adapters. The adapters are designed
to convert these standard trimmer models into panel mount trimmers in a quick, convenient, and economical manner.
Assembly with the trimmer is accomplished by snap-in, providing for minimal installation time.
MODEL 6
SHAFT INSERTED INTO REAR OF BUSHING
BLADE ENGAGES TRIMMER SCREWDRIVER SHAFT SLOT
TRIMMER INSERTED INTO REAR OF MODEL 6
HOUSING AND SNAPS INTO ASSEMBLED POSITION
DIMENSIONS in inches (millimeters)
ACTUAL SIZES
6-1-0
0.900 ± 0.031
(23)
0.246
(6.25)
0.295 ± 0.010
(7.50)
0.366
(9.30)
1.44
(3.66)
12-28 NF
6-1-0-P
0.246
(6.25)
0.916
(23.27)
0.235
(5.97)
0.366
(9.3)
0.123
(3.12)
M6 × 0.75
0.166 (4.22)
0.155 (3.94)
0.366
(9.30)
0.144
(3.66)
Ø 0.141
(3.58)
0.128
(3.25)
6-2-0
1.400 ± 0.031
(35.5)
0.295 ± 0.010
(7.50)
0.260 ± 0.031
(6.60)
0.395 ± 0.031
(10)
12-28 NF
Revision: 22-Sep-15
Document Number: 57014
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
6
www.vishay.com
Vishay Spectrol
AVAILABLE SHAFT CONFIGURATIONS
0.280 ± 0.010
(7.11)
12-28 NF
6-1-3
6-1-2
0.875 ± 0.031
(22.22)
0.575 ± 0.031
(14.60)
0.280 ± 0.010
(7.11)
0.280 ± 0.010
(7.11)
SLOT 0.022 WIDE
x 0.025 DEEP
SLOT 0.022 WIDE
x 0.025 DEEP
12-28 NF
12-28 NF
0.118 ± 0.003 Ø
0.118 ± 0.003 Ø
SHAFT DIMENSIONS APPLY TO 6-1-X AND 6-2-X
VERSION
MECHANICAL SPECIFICATIONS
PACKAGING
Construction: molded polyester plastic
Box of 100 pieces




Bushing Material: brass nickel plated
Bushing Hardware: panel nut and lock washer
Shafts Available (Inches): (1) flush (2) 0.575 (3) 0.875
See photos and drawings for additional information
ORDERING INFORMATION
6
1
2
MODEL
TRIMMER SIZE
SHAFT EXTENSION
OPTION
1. Fits Vishay Spectrol Model 43
2. Fits Vishay Spectrol Model 70
0. No extra shaft
1. Shaft flush with bushing
2. 0.575 Shaft extension
3. 0.875 Shaft extension
P: Plastic bushing
SAP PART NUMBERING GUIDELINES
A
C
C
T
R
MODEL
I
A
D
TOL.
B
3
PACKAGING
CODE
0
6
1
2
SPECIAL
(IF APPLICABLE)
See the end of this data book for conversion tables
RELATED DOCUMENTS
APPLICATION NOTES
Potentiometers and Trimmers
www.vishay.com/doc?51001
Guidelines for Vishay Sfernice Resistive and Inductive Components
www.vishay.com/doc?52029
Revision: 22-Sep-15
Document Number: 57014
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Similar pages