Data Sheet

BFR94A
NPN 5 GHz wideband transistor
Rev. 4 — 2 October 2014
Product data sheet
1. Product profile
1.1 General description
NPN wideband transistor in a plastic SOT23 package. PNP complement; BFT92
1.2 Features and benefits




High power gain
Low noise figure
Low intermodulation distortion
AEC-Q101 qualified
1.3 Applications
 RF wideband amplifiers and oscillators
1.4 Quick reference data
Table 1.
Quick reference data
Symbol Parameter
Conditions
Min Typ
Max
Unit
VCBO
collector-base voltage
-
-
20
V
VCEO
collector-emitter
voltage
-
-
15
V
IC
collector current
-
-
25
mA
Ptot
total power dissipation Tsp  95 C
-
-
300
mW
Cre
feedback capacitance
IC = iC = 0 mA; VCE = 10 V;
f = 1 MHz
-
0.35
-
pF
fT
transition frequency
IC = 15 mA; VCE = 10 V;
f = 500 MHz
-
5
-
GHz
GUM
unilateral power gain
IC = 15 mA; VCE = 10 V;
Tamb = 25 C
f = 1 GHz
-
14
-
dB
f = 2 GHz
-
8
-
dB
NF
noise figure
IC = 5 mA; VCE = 10 V; f = 1 GHz;
S = opt; Tamb = 25 C
-
2.1
-
dB
VO
output voltage
IMD = 60 dB; IC = 14 mA;
VCE = 10 V; RL = 75 ;
fp + fq  fr = 793.25 MHz
-
150
-
mV
BFR94A
NXP Semiconductors
NPN 5 GHz wideband transistor
2. Pinning information
Table 2.
Pinning
Pin
Description
1
base
2
emitter
3
collector
Simplified outline
Graphic symbol
V\P
3. Ordering information
Table 3.
Ordering information
Type number
BFR94A
Package
Name
Description
Version
-
plastic surface-mounted package; 3 leads
SOT23
4. Marking
Table 4.
Marking
Type number
Marking code
BFR94A
NL*
Description
* = p : made in Hong Kong
* = w : made in China
5. Limiting values
Table 5.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Parameter
Product data sheet
Min
Max
Unit
VCBO
collector-base voltage
open emitter
-
20
V
VCEO
collector-emitter voltage
open base
-
15
V
VEBO
emitter-base voltage
open collector
-
2
V
IC
collector current
-
25
mA
Tsp  95 C; see Figure 2
[1]
Ptot
total power dissipation
-
300
mW
Tstg
storage temperature
65
+150
C
Tj
junction temperature
-
+150
C
[1]
BFR94A
Conditions
Tsp is the temperature at the solder point of the collector pin.
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 2 October 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
2 of 14
BFR94A
NXP Semiconductors
NPN 5 GHz wideband transistor
6. Thermal characteristics
Table 6.
Thermal characteristics
Symbol
Parameter
Rth(j-sp)
thermal resistance from junction to Tsp  95 C
solder point
[1]
Conditions
[1]
Typ
Unit
260
K/W
Tsp is the temperature at the solder point of the collector pin.
7. Characteristics
Table 7.
Characteristics
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
ICBO
collector-base cut-off current
IE = 0 A; VCB = 10 V
-
-
50
nA
hFE
DC current gain
IC = 15 mA; VCE = 10 V; see Figure 3
65
90
135
Cc
collector capacitance
IE = ie = 0 A; VCB = 10 V; f = 1 MHz:
see Figure 4
-
0.6
-
pF
Ce
emitter capacitance
IC = ic = 0 A; VEB = 10 V; f = 1 MHz
-
1.2
-
pF
Cre
feedback capacitance
IC = ic = 0 mA; VCE = 10 V; f = 1 MHz
-
0.35
-
pF
fT
transition frequency
IC = 15 mA; VCE = 10 V; f = 500 MHz;
see Figure 5
-
5
-
GHz
GUM
unilateral power gain
IC = 15 mA; VCE = 10 V; Tamb = 25 C
f = 1 GHz
-
14
-
dB
f = 2 GHz
-
8
-
dB
f = 1 GHz
-
2.1
-
dB
f = 2 GHz
-
3
-
dB
output voltage
[2][3]
-
150
-
mV
second-order intermodulation
distortion
[2][4]
-
50
-
dB
NF
IMD2
[1]
IC = 5 mA; VCE = 10 V; S = opt;
Tamb = 25 C;
see Figure 12 and Figure 13
noise figure
VO
[1]
see Figure 15
GUM is the maximum unilateral power gain, assuming S12 is zero and
2
S 21
- dB.
G UM = 10 log ------------------------------------------------------2
2
 1 – S 11   1 – S 22 
[2]
[3]
Measured on the same crystal in a SOT37 package (BFR90A).
IMD = 60 dB (DIN 45004B); IC = 14 mA; VCE = 10 V; RL = 75 ; VSWR < 2; Tamb = 25 C;
Vp = VO at IMD = 60 dB; fp = 795.25 MHz;
Vq = VO 6 dB at fq = 803.25 MHz;
Vr = VO 6 dB at fr = 805.25 MHz;
measured at fp + fq  fr = 793.25 MHz
[4]
IC = 14 mA; VCE = 10 V; RL = 75 ; VSWR < 2; Tamb = 25 C;
Vp = 60 mV at fp = 250 MHz;
Vq = 60 mV at fp = 560 MHz;
measured at fp + fq = 810 MHz
BFR94A
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 2 October 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
3 of 14
BFR94A
NXP Semiconductors
NPN 5 GHz wideband transistor
2.2 nF
+VCC
2.2 nF
+VBB
L3
33 kΩ
L2
1 nF
1 nF
L1
300 Ω
75 Ω
output
1 nF
75 Ω
input
DUT
3.3 pF
18 Ω
0.82 pF
001aam883
L1 = L2 = 5 H choke.
L2 = 3 turns 0.4 mm copper wire, internal diameter 3 mm, winding pitch 1 mm.
Fig 1.
Intermodulation distortion and second harmonic distortion MATV test circuit
001aam884
400
Ptot
(mW)
001aam885
120
hFE
300
80
200
40
100
0
0
0
50
100
150
200
0
10
Tsp (°C)
20
30
IC (mA)
VCE = 10 V; Tj = 25 C.
Fig 2.
Power derating curve
BFR94A
Product data sheet
Fig 3.
DC current gain as a function of collector
current; typical values
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 2 October 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
4 of 14
BFR94A
NXP Semiconductors
NPN 5 GHz wideband transistor
001aam886
1.0
CC
(pF)
001aam887
6
fT
(GHz)
0.8
4
0.6
0.4
2
0.2
0
0
0
5
10
15
20
0
10
20
VCB (V)
IC = iC = 0 mA; f = 1 MHz; Tj = 25 C.
Fig 4.
VCE = 10 V; f = 500 MHz; Tamb = 25 C.
Collector capacitance as a function of
collector-base voltage; typical values
Fig 5.
001aam888
30
30
IC (mA)
gain
(dB)
Transition frequency as a function of collector
current; typical values
001aam889
30
gain
(dB)
MSG
20
20
MSG
GUM
GUM
10
10
0
0
0
5
10
15
20
25
0
5
10
15
IC (mA)
VCE = 10 V; f = 500 MHz.
MSG = maximum stable gain.
Gain as a function of collector current; typical
values
BFR94A
Product data sheet
25
IC (mA)
VCE = 10 V; f = 500 MHz.
MSG = maximum stable gain.
Fig 6.
20
Fig 7.
Gain as a function of collector current; typical
values
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 2 October 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
5 of 14
BFR94A
NXP Semiconductors
NPN 5 GHz wideband transistor
001aam890
50
gain
(dB)
001aam891
50
gain
(dB)
40
40
GUM
GUM
30
30
MSG
MSG
20
20
10
0
102
10
103
Gmax
10
Gmax
0
104
102
10
103
104
f (MHz)
f (MHz)
IC = 5 mA; VCE = 10 V.
MSG = maximum stable gain.
Gmax = maximum available gain.
Fig 8.
IC = 5 mA; VCE = 10 V.
MSG = maximum stable gain.
Gmax = maximum available gain.
Gain as a function of frequency; typical values
001aam892
40
Fig 9.
Minimum noise figure as a function of
frequency; typical values
001aam893
30
NF = 3.5 dB
BS
(mS)
BS
(mS)
3.0
20
NF = 3.0 dB
10
2.5
2.5
0
2.0
1.8
2.4
−10
1.7
−20
−40
0
20
40
60
80
−30
0
GS (mS)
60
IC = 14 mA; VCE = 10 V; f = 800 MHz.
Fig 10. Circles of constant noise figure; typical values
Product data sheet
40
GS (mS)
IC = 4 mA; VCE = 10 V; f = 800 MHz.
BFR94A
20
Fig 11. Circles of constant noise figure; typical values
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 2 October 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
6 of 14
BFR94A
NXP Semiconductors
NPN 5 GHz wideband transistor
001aam894
4
f = 2 GHz
NF
(dB)
001aam895
4
IC = 15 mA
NF
(dB)
3
10 mA
5 mA
3
1 GHz
500 MHz
2
2
1
1
0
102
10
1
0
102
103
104
IC (mA)
f (MHz)
VCE = 10 V.
VCE = 10 V.
Fig 12. Minimum noise figure as a function of
collector current; typical values
001aam896
−45
IMD
(dB)
Fig 13. Minimum noise figure as a function of
frequency; typical values
IMD2
(dB)
−50
−40
−55
−45
−60
−50
−65
−55
−70
001aam897
−35
10
14
18
22
26
30
−60
10
14
IC (mA)
26
30
VCE = 10 V.
Fig 14. Intermodulation distortion as a function of
collector current; typical values
Product data sheet
22
IC (mA)
VCE = 10 V.
BFR94A
18
Fig 15. Second-order intermodulation distortion as a
function of collector current; typical values
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 2 October 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
7 of 14
BFR94A
NXP Semiconductors
NPN 5 GHz wideband transistor
1
0.5
2
0.2
5
10
+j
1200
0
0.2
−j
1
0.5
1000
2
5
∞
10
800
500
10
200
0.2
5
100 MHz
2
0.5
001aam898
1
VCE = 10 V; IC = 14 mA; ZO = 50 ; Tamb = 25 C.
Fig 16. Common emitter input reflection coefficient (S11); typical values
90°
120°
150°
60°
100 MHz
30°
200
500
800
1000
1200
180°
0
+ϕ
10
20
30
0°
−ϕ
150°
30°
120°
60°
−90°
001aam899
VCE = 10 V; IC = 14 mA; Tamb = 25 C.
Fig 17. Common emitter forward transmission coefficient (S21); typical values
BFR94A
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 2 October 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
8 of 14
BFR94A
NXP Semiconductors
NPN 5 GHz wideband transistor
90°
120°
60°
1200 MHz
typ
150°
1000
30°
800
500
200
100
0
180°
+ϕ
0.05
0.1
0.15
0°
−ϕ
150°
30°
120°
60°
−90°
001aam900
VCE = 10 V; IC = 14 mA; Tamb = 25 C.
Fig 18. Common emitter reverse transmission coefficient (S12); typical values
1
0.5
2
0.2
5
10
+j
0
0.2
0.5
1
−j
2
5
∞
10
100
800
1000
500 MHz
1200
200
10
5
0.2
2
0.5
1
001aam901
VCE = 10 V; IC = 14 mA; ZO = 50 ; Tamb = 25 C.
Fig 19. Common emitter output reflection coefficient (S22); typical values
BFR94A
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 2 October 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
9 of 14
BFR94A
NXP Semiconductors
NPN 5 GHz wideband transistor
8. Package outline
3ODVWLFVXUIDFHPRXQWHGSDFNDJHOHDGV
627
%
'
$
(
;
+(
Y
$
4
$
$
F
H
ES
Z
%
/S
H
GHWDLO;
PP
VFDOH
'LPHQVLRQVPPDUHWKHRULJLQDOGLPHQVLRQV
8QLW
PP
PD[
QRP
PLQ
$
$
ES
'
(
F
H
H
+(
/S
4
Y
Z
VRWBSR
2XWOLQH
YHUVLRQ
5HIHUHQFHV
,(&
627
-('(&
-(,7$
(XURSHDQ
SURMHFWLRQ
,VVXHGDWH
72$%
Fig 20. Package outline SOT23
BFR94A
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 2 October 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
10 of 14
BFR94A
NXP Semiconductors
NPN 5 GHz wideband transistor
9. Abbreviations
Table 8.
Abbreviations
Acronym
Description
NPN
Negative Positive Negative
PNP
Positive Negative Positive
RF
Radio Frequency
MATV
Master Antenna Television
VSWR
Voltage Standing Wave Ratio
10. Revision history
Table 9.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
BFR94A v.4
20141002
Product data sheet
-
BFR94A v.3
Modifications:
•
•
Table 2 on page 2: changed graphic symbol
Figure 20 on page 10: updated
BFR94A v.3
20101115
Product data sheet
-
BFR94A v.2
BFR94A v.2
19971204
Product data sheet
-
-
BFR94A
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 2 October 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
11 of 14
BFR94A
NXP Semiconductors
NPN 5 GHz wideband transistor
11. Legal information
11.1
Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
11.2
Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
11.3
Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. NXP Semiconductors takes no
responsibility for the content in this document if provided by an information
source outside of NXP Semiconductors.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
BFR94A
Product data sheet
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors and its suppliers accept no liability for
inclusion and/or use of NXP Semiconductors products in such equipment or
applications and therefore such inclusion and/or use is at the customer’s own
risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 2 October 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
12 of 14
BFR94A
NXP Semiconductors
NPN 5 GHz wideband transistor
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Non-automotive qualified products — Unless this data sheet expressly
states that this specific NXP Semiconductors product is automotive qualified,
the product is not suitable for automotive use. It is neither qualified nor tested
in accordance with automotive testing or application requirements. NXP
Semiconductors accepts no liability for inclusion and/or use of
non-automotive qualified products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without NXP Semiconductors’ warranty of the
product for such automotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
NXP Semiconductors’ specifications such use shall be solely at customer’s
own risk, and (c) customer fully indemnifies NXP Semiconductors for any
liability, damages or failed product claims resulting from customer design and
use of the product for automotive applications beyond NXP Semiconductors’
standard warranty and NXP Semiconductors’ product specifications.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
11.4
Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
12. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
BFR94A
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 2 October 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
13 of 14
BFR94A
NXP Semiconductors
NPN 5 GHz wideband transistor
13. Contents
1
1.1
1.2
1.3
1.4
2
3
4
5
6
7
8
9
10
11
11.1
11.2
11.3
11.4
12
13
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
General description . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits . . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Quick reference data . . . . . . . . . . . . . . . . . . . . 1
Pinning information . . . . . . . . . . . . . . . . . . . . . . 2
Ordering information . . . . . . . . . . . . . . . . . . . . . 2
Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2
Thermal characteristics . . . . . . . . . . . . . . . . . . 3
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Package outline . . . . . . . . . . . . . . . . . . . . . . . . 10
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Revision history . . . . . . . . . . . . . . . . . . . . . . . . 11
Legal information. . . . . . . . . . . . . . . . . . . . . . . 12
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 12
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Contact information. . . . . . . . . . . . . . . . . . . . . 13
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP Semiconductors N.V. 2014.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
Date of release: 2 October 2014
Document identifier: BFR94A