LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only SURFACE MOUNT LED TAPE AND REEL Pb Lead-Free Parts L2WK9553/TR1-WW-A01 DATA SHEET DOC. NO : QW0905-L2WK9553/TR1-WW-A01 REV. : A DATE : 22 - Jul. - 2010 發行 立碁電子 DCC LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. L2WK9553/TR1-WW-A01 Page 1/13 Features: 1. Top view LED. 2. white SMT package. 3. Leadframe package with individual 4 pin. 4.Wide viewing angle. 5.Soldering methods:IR reflow soldering. 6.Feature of the device:more light due to higher optical efficiency;extremely wide viewing angle;ideal for backlighting and coupling in light guide. Descriptions: The L2WK9553 SMD has wide viewing angle and optimized light coupling by inter reflector,The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications: 1. Telecommunication: indicator and backlighting in telephone and fax. 2. Indicators. 3. Switch lights. Device Selection Guide: PART NO MATERIAL L2WK9553/TR1-WW-A01 InGaN/GaN COLOR Emitted Lens White Yellow Diffused LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. L2WK9553/TR1-WW-A01 Page 2/13 Package Dimensions 3.5 1.9 3 0.8 0.7±0.05 2 0.8 0.7±0.05 2.7 4 2.2 1 0.7±0.05 0.7±0.05 Soldering Terminal 3.2 WK 0.8 3+ -2 -1 4+ WK 0.8 0.8 Note : 1.All dimension are in millimeter tolerance is ± 0.2mm unless otherwise noted. 2.Specifications are subject to change without notice. Recommended Soldering Pad Dimensions 4.9 1.6 1.6 0.85 0.65 0.85 Note : The tolerances unless mentioned is ±0.1mm,Unit=mm. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 3/13 PART NO. L2WK9553/TR1-WW-A01 Absolute Maximum Ratings at Ta=25 ℃ Symbol Ratings UNIT Forward Current IF 60 mA Peak Forward Current Duty 1/10@10KHz IFP 200 mA Power Dissipation PD 240 mW Reverse Current @5V Ir 50 μA Electrostatic Discharge ESD 500 V Operating Temperature Topr - 20 ~ + 80 ℃ Storage Temperature Tstg - 30 ~ + 100 ℃ Parameter Typical Electrical & Optical Characteristics (Ta=25 ℃) Items Min. Luminous Intensity Symbol Min. Typ. Max. UNIT CONDITION ---- mcd IF=20mA X 2 Iv 2000 2400 X 0.436 ---- 0.525 ---- IF=20mA X 2 Y 0.394 ---- 0.449 ---- IF=20mA X 2 VF 2.8 3.2 4.0 V IF=20mA X 2 2θ 1/2 ---- 120 ---- deg IF=20mA X 2 Chromaticity Coordinates Forward Voltage Viewing Angle Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2.The luminous intensity data did not including ±15% testing tolerance. 3.The color coordinates measurememt allowance is ±0.01 testing tolerance. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 4/13 PART NO. L2WK9553/TR1-WW-A01 Luminous Intensity Classification BIN CODE X11X12 X13X14 X15X16 X17X18 X19X20 X21X22 X23X24 X25X26 Iv(mcd) at40mA Min. Max. 2000 2100 2200 2300 2400 2500 2600 2700 2100 2200 2300 2400 2500 2600 2700 2800 Forward Voltage Classification BIN CODE 1 2 3 4 5 6 7 8 Vf(v) at40mA Min. Max. 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 5/13 PART NO. L2WK9553/TR1-WW-A01 Chromaticity Coordinates Specifications For Bin Grading Color Coordiante at40mA CCT(K) BIN CODE JN 2220 ~ 2370 2370 ~ 2520 2520 ~ 2670 2670 ~2850 JO 1 X 3 2 Y X Y X 4 Y X Y 0.499 0.428 0.515 0.432 0.525 0.449 0.509 0.445 0.49 0.411 0.506 0.415 0.515 0.432 0.499 0.428 JP 0.481 0.396 0.497 0.400 0.506 0.415 0.490 0.411 KN 0.483 0.424 0.499 0.428 0.509 0.445 0.493 0.441 KO 0.474 0.407 0.411 0.49 0.428 0.483 0.424 KP 0.465 0.392 0.481 0.396 0.49 0.411 0.474 0.407 LN 0.467 LO 0.458 0.403 0.474 0.407 0.483 0.424 0.467 LP 0.449 0.388 0.465 0.392 0.474 0.407 0.458 0.403 MN 0.461 0.433 0.453 0.416 0.467 0.420 0.477 0.437 MO 0.453 0.416 0.444 0.399 0.458 0.403 0.467 0.42 MP 0.458 0.403 0.444 0.399 0.436 0.384 0.449 0.388 0.42 0.49 0.483 0.424 0.493 0.441 0.477 0.437 0.42 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. L2WK9553/TR1-WW-A01 CIE Chromaticity Diagram Page 6/13 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 7/13 PART NO. L2WK9553/TR1-WW-A01 Typical Electro-Optical Characteristics Curve WK CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 3.0 Relative Intensity Normalize @20mA Forward Current(mA) 1000 100 10 1 01 2.5 2.0 1.5 1.0 0.5 0.0 1.0 2.0 3.0 4.0 5.0 1 10 Fig.4 Relative Intensity vs. Temperature 1.2 Relative Intensity@20mA Normalize @25 ℃ Forward Voltage@20mA Normalize @25 ℃ Fig.3 Forward Voltage vs. Temperature 1.1 1.0 0.9 0.8 -20 0 20 40 60 80 3.0 2.5 2.0 1.5 1.0 0.5 0.0 100 -40 -20 0 20 40 60 80 100 Ambient Temperature(℃) Ambient Temperature( ℃) Fig.5 Luminous Spectrum(Ta=25 ℃) DC Forward Current [mA] Fig.6 Forward Current vs. Temperature SPECTRAL RADIANCE Relative Intensity 1000 Forward Current(mA) Forward Voltage(V) -40 100 100 80 60 40 20 80 70 60 50 40 30 20 10 0 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 0 400 500 600 Wavelength (nm) 700 800 Ambient Temperature Ta (℃) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. L2WK9553/TR1-WW-A01 Page 8/13 Carrier Type Dimensions 4.0 2.0 4.0 ψ1.55 2.24 1.75 5.5 12.0±0.3 9.3 4.06 Polarity 3.12 Note : The tolerances unless mentioned is ±0.1mm,Angle ± 0.5. Unit=mm. • Packing Specifications 0 .2 0 .8 0 .6 Aluminum Moist-Proof bag Label 0.8 0.6 0.2 0.4 0 .4 Label Part No. Description Quantity/Reel L2WK9553/TR1-WW-A01 8.0mm tape,7"reel 1500 PCS LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 9/13 PART NO. L2WK9553/TR1-WW-A01 Label Explanation LIGITEK ELECTRONICS CO., LTD. Pb PART : L2WK9553/TR1/A-WW-A01 BIN : Luminous Intensity LOT : GS1-070481 QTY(PCS): 1500 HUE : Chromaticity Coordinates (CIE_x , CIE_y) BIN/HUE : X19X20/KO VF:3.3-3.4 3.3 - 3.4 : Forward Voltage Reel Dimensions 0.2 0.4 0.8 0.8 0.6 0.2 0.4 0.6 2.0±0.5 178±1.5 60.0±1.0 9.0±1.0 ψ13.5±1.0 12.0± 1.0 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. L2WK9553/TR1-WW-A01 Page 10/13 Box Explanation 1. 4 BAG / INNER BOX 2. INNER BOX SIZE : L X W X H 23cm X 8.5cm x 26cm H W L 3. 10 INNER BOXES / CARTON 4. CARTON SIZE : L X W X H 49cm X 46cm x 29cm L W H LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. L2WK9553/TR1-WW-A01 Page 11/13 Recommended Soldering Conditions 1. Hand Solder Basic spec is ≦ 320℃ 3 sec one time only. 2. Wave Solder Soldering heat Max. 260 ℃ 245±5℃ within 5 sec 120 ~ 150℃ Preheat 120 ~ 180 sec 3 PB-Free Reflow Solder 1~5° C/sec Preheat 180~200 ° C 1~5° C/sec 260° C MaX. 10sec.Max 6° C/sec Above 220 ° C 60 sec.Max. 120 sec.Max. Note: 1.Reflow soldering should not be done more than two times. 2.When soldering,do not put stress on the LEDs during heating. 3.After soldering,do not warp the circuit board. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. L2WK9553/TR1-WW-A01 Page 12/13 Precautions For Use: Storage time: 1.The operation of Temperatures and RH are : 5 ℃~35℃,RH60%. 2.Once the package is opened, the products should be used within a week. Otherwise, they should be kept in a damp proof box with descanting agent. Considering the tape life, we suggest our customers to use our products within a year(from production date). 3.If opened more than one week in an atmosphere 5 ℃ ~ 35℃,RH60%, they should be treated at 60 ℃± 5 ℃fo r 15hrs. Drive Method: LED is a current operated device, and therefore, requirer some kind of current limiting incorporated into the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series with the LED. Consider worst case voltage variations than could occur across the current limiting resistor. The forwrd current should not be allowed to change by more than 40 % of its desired value. Circuit model A Circuit model B LED LED (A) Recommended circuit. (B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED. Cleaning: Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED. ESD(Electrostatic Discharge): Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. L2WK9553/TR1-WW-A01 Page 13/13 Reliability Test: (1)Test items and results Classification Test Item Test Condition Sample Size Operating Life Test 1.Ta=Under Room Temperature As Per Data Sheet Maximum Rating. 2.If=20mA 3.t=1000 hrs 22 High Temperature Storage Test 1.Ta=105 ℃± 5℃ 2.t=500 hrs 22 Low Temperature Storage Test 1.Ta=-40 ℃±5 ℃ 2.t=1000 hrs 22 High Temperature High Humidity Storage Test 1.IR-Reflow In-Board, 2 Times 2.Ta=85 ℃± 5℃ 3.RH=90 %~95% 4.t=500hrs±2hrs 22 1.IR-Reflow In-Board,2 times 2.Ta=105 ℃±5℃& -40 ℃± 5℃ (30min) (30min) 3.total 100 cycles 22 1.T.Sol=260 ℃±5 ℃ 2.Dwell Time= 10 Max . 22 1.105 ℃ ~ 25 ℃ ~ - 40 ℃ 30mins 15mins 30mins 2.100 Cyeles 22 Endurance Test Thermal Shock Test Environmental Test Reflow Soldering Test Temperature Cycling (2)Criteria for judging the damage Criteria for Judgement Item Symbol Test Conditions Min. Max. Forward Voltage Vf If=20mA - U.S.L x1.2 Reverse Current Ir Vr=5V - U.S.L x2.0 Luminous Intensity Iv If=20mA L.S.L x 0.5 - Note: 1.U.S.L.:Upper Standard Level. 2.L.S.L.:Lower Standard Level.