LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only High Power Light LED Pb Lead-Free Parts LGX2WAS-521E-A01 DATA SHEET DOC. NO : QW0905-LGX2WAS-521E-A01 REV. : A DATE : 10 - Jul. - 2013 發行 立碁電子 DCC LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Typical Applications Features *. High Flux per LED *. Very long operating life(up to 100k hours). *. Available in White. *. More Energy Efficient than lncandescent and most Halogen lamps. *. Low voltage DC operated.. *. Cool beam, safe to the touch. *. Instant light(less than 100 ns). *. Fully dimmable. *. No UV. *. Reading Light (car,bus,aircraft) *. Portable(flashlight,bicycle). *. LCD Backlights / Light Guides. *. Automotive Exterior (Stop-Tail-Tum,CHMSL,Mirror Side Repeat). *. Commercial and Residential Architectural lighting. *. Mini-accent / Uplighters / Downlighters / Orientation lighting *. Fiber Optic Alternative / Decorative / Entertainment lighting. *. Security / Garden lighting. *. Cove / Undershelf / Task lighting. *. Traffic signaling / Beacons / Rail crossing and Wayside lighting. *. Decorative. *. Sign and channel Letter. Dimension 7.4 5.0 1 6 2 5 3 4 1.6 Recommended Solder Patter 5.0 1.6 7.9 1.0 1.0 1.2 1.3 0.2 0.4 1.2 0.4 1.0 1.2 2.2 4.2 3.75 2 Note : The tolerances unless mentioned is ±0.1mm,Unit=mm. 5 Note : 1.All dimension are in millimeter tolerance is ±0.2mm unless otherwise noted. 2.Specifications are subject to change without notice. Page 1/11 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Absolute Maximum Ratings at Ta=25 ℃ Ratings Parameter Symbol UNIT White IF 350 mA Power Dissipation PD 1.3 W Peak pulse current Duty 1/10@10KHz IFP 700 mA LED junction Temperature Tj 125 ℃ Reverse Current(VR=5V) Ir 50 μA Electrostatic Discharge ESD 500 V Storage Temperature Tstg -30 ~ +100 ℃ Operating Temperature Topr -20 ~ +80 ℃ Soldering Temperature Tp 260 ℃ Hand Soldering Time at320°C(Max) Tsol 3 seconds DC Forward Current Note: 1.Proper current derating must be observed to maintain temperature below the maximum. 2.LEDS are not designed to be driven in reverse bias. Luminous Intensity Characteristics at 350mA (Ratings At 25¢J Ambient) PART NO LGX2WAS-521E-A01 Emission Color White Luminous Flux @350mA Min. Typ. Max. 120 130 ---- Note : 1. White emitters are built with InGaN. 2. Luminous Intensity is measured with an accuracy of ±10% Page 2/11 Units lm LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Forward Voltage Characteristics at 350mA (Ratings At 25℃ Ambient) PART NO Vf Emission Color Min. Typ. Max. White 2.8 ---- 3.8 LGX2WAS-521E-A01 Units V Note : Forward Voltage is measured with an accuracy of±0.1V Chromaticity Coordinates Characteristics at 350mA (Ratings At 25℃ Ambient ) PART NO Chromaticity Coordinates Emission Color LGX2WAS-521E-A01 White X Y Min. Max. Min. Max. 0.3207 0.3376 0.3243 0.3616 Note : ±0.01 is tester tolerance. Emission Angle Characteristics at 350mA (Ratings At 25℃ Ambient ) PART NO LGX2WAS-521E-A01 Emission Color Lambertian Units White 120 Degess Page 3/11 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Bin Code Description Bin Code Luminous Intensity CIE Forward Voltage FA2FA3 57K-1 3.0-3.2 Luminous Intensity (lm) @IF=350mA Bin Code Min. Max. FA2FA3 120 130 FA3FA4 130 140 FA4FA5 140 150 FA5FA6 150 160 FA6FA7 160 170 Color Rank @IF=350mA Forward Voltage(V) @IF=350mA 57K-1 2.8-3.0 57K-2 3.0-3.2 57K-3 3.2-3.4 57K-4 3.4-3.6 3.3-3.8 Page 4/11 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Bins Code of chromaticity coordinates Color Coordiante at350mA CCT(K) 5700 BIN CODE 1 X 2 Y X 3 Y X 4 Y X Y 57K-1 0.3376 0.3616 0.3292 0.3539 0.3293 0.3423 57K-2 0.3371 0.3493 0.3293 0.3423 0.3294 0.3306 0.3366 0.3369 57K-3 0.3292 0.3539 0.3207 0.3462 0.3215 0.3353 0.3293 0.3423 57K-4 0.3293 0.3423 0.3215 0.3353 0.3222 0.3243 0.3294 0.3306 NOTE: Tolerance on each color bin(x,y)is±0.01 Page 5/11 0.3371 0.3493 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only CIE Chromaticity Diagram 0.38 5310 5700 0.36 6020 57K-1 57K-3 0.34 57K-2 57K-4 0.32 0.30 0.30 0.32 0.34 Page 6/11 0.36 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Recommended Profile for Reflow Soldering Pb -free solder temperature profile Pb -free solder Temperature profile Pre-heat Pre-heat time Peak-Temperature Soldering time condition 180-200°C 120 Sec Max 260°C Max 10 Sec Max 260°C.Max. 10 Sec .Max. 1-5°C/Sec. 60 Sec.Max. Above220°C 6°C/Sec. Pre-heating 180-200°C 1-5°C/Sec. 120 Sec. Max. (1) Reflow soldering should not be done more than two times. (2) When soldering,do not put stress on the LEDs during heating. (3) After soldering,do not warp the circuit board. (4) The encapsulated material of the LEDs is silicone. Precautions should be taken to avoid the strong pressure on the encapsulated part. So when using the chip mounter,the picking up nozzle that does not affect the silicone resin should be used. Hand Soldering Conditions: Do not exceed 3 seconds at maximum 320°C under soldering iron.(one time only) Page 7/11 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Typical Electro-Optical Characteristics Curve Fig.2 Forward current vs.Luminous Intensity Relative Luminous Intensity(%) Fig.1 Forward current vs. Forward Voltage 350 300 250 200 150 100 50 0 2 2.2 2.4 2.6 2.8 3 3.2 3.4 3.6 1.2 1 0.8 0.6 0.4 0.2 0 0 50 100 150 200 250 Forward Current(mA) Forward Current(mA) Fig.3 Directivity Radiation 0° -30° 30° -60° 60° 100% 75% 50% Relative Luminous Flux(%) Forward Voltage(V) 400 25% 0 25% 50% 75% 100% Fig.5 Luminous Spectrum(Ta=25 ℃) SPECTRAL RADIANCE 45 40 35 30 25 20 15 10 5 0 300 350 400 450 500 550 600 650 700 Wavelength (nm) Page 8/11 750 800 850 900 300 350 400 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Carrier Type Dimensions 4.0 - 8.0 2.0 ψ1.5 1.75 7.5 16 + 13.3 Polarity Note : The tolerances unless mentioned is ±0.2mm. Packing Specifications Label Aluminum Moist-Proof bag Label Desiccant Page 9/11 7 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Label Explanation Pb LIGITEK ELECTRONICS CO., LTD. PART : LGX2WAS-521E-A01 LOT : GS11370168 QTY(PCS): 1500 BIN/HUE : FA2FA3/57K-1 BIN : Luminous Intensity HUE : Chromaticity Coordinates (CIE_x , CIE_y) VF:3.0-3.2 VF : Forward Voltage Reel Dimensions 20.7±1.0 99.0±2.0 330±2.0 13.5±1.0 Page 10/11 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Reliability Test: (1)Test items and results Test Item Classification Test Condition Sample Size Operating Life Test 1.Ta=Under Room Temperature As Per Data Sheet Maximum Rating. 2.If=350mA 3.t=1000 hrs 22 High Temperature Storage Test 1.Ta=105 ℃± 5℃ 2.t= 500 hrs 22 Low Temperature Storage Test 1.Ta=-40 ℃±5℃ 2.t=1000 hrs 22 High Temperature High Humidity Storage Test 1.IR-Reflow In-Board, 2 Times 2.Ta= 85℃± 5℃ 3.RH=90 %~95 % 4.t= 500hrs±2hrs 22 1.IR-Reflow In-Board,2 times 2.Ta=105 ℃ ±5℃ & -40 ℃± 5℃ ( 30min) (30min) 3.total 100 cycles 22 1.T.Sol=260 ℃±5℃ 2.Dwell Time= 10 Max. 22 1.105 ℃ ~ 25℃ ~ - 40℃ 30mins 15mins 30mins 2.10 0 Cyeles 22 Endurance Test Thermal Shock Test Environmental Test Reflow Soldering Test Temperature Cycling (2)Criteria for judging the damage Item Symbol Test Conditions Criteria for Judgement Min. Max. Forward Voltage Vf If=350mA - U.S.L x1.2 Reverse Current Ir Vr=5V - U.S.L x2.0 Luminous Intensity Iv L.S.L x 0.7 - If=350mA Page 11/11