Datasheet

UNISONIC TECHNOLOGIES CO., LTD
DB106G
DIODE
1.0A GLASS PASSIVATED
SINGLE-PHASE BRIDGE
RECTIFIER

+
DESCRIPTION
The UTC DB106G is a 1.0A glass passivated single-phase bridge
rectifier.
The UTC DB106G is suitable for automatic insertion.

-
DFM
FEATURES
* Surge overload ratings to 30 amperes peak
* Recommended for non-automatic applications
* Suitable for automatic insertion
* Glass passivated chip junctions

SYBOL

ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
DB106GL-DFM-T
DB106GP-DFM-T

Package
Packing
DFM
Tube
MARKING
www.unisonic.com.tw
Copyright © 2014 Unisonic Technologies Co., Ltd
1 of 4
QW-R227-002.A
DB106G

DIODE
ABSOLUTE MAXIMUM RATINGS (TA=25°C unless otherwise noted)
PARAMETER
SYMBOL
RATINGS
UNIT
Repetitive Peak Reverse Voltage
VRRM
800
V
RMS Voltage
VRMS
560
V
Continuous Reverse Voltage
VR
800
V
Forward Rectified Current
IO
1.0
A
0.06”(1.5mm) lead lenth at TA=40°C (Note 2)
Peak Forward Surge Current 8.3ms Single Half
IFSM
50
A
Sine-Wave Superimposed on Rated Load
I2t Rating for Fusing
t<8.3ms
I2t
10
A2s
Operating Temperature
TJ
-65~+150
°C
Storage Temperature
TSTG
-65~+150
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.

THERMAL CHARACTERISTICS (Note 2)
PARAMETER
Junction to Ambient

SYMBOL
θJA
RATINGS
40
UNIT
°C/W
ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
Forward Voltage (t<8.3ms )
VF
IF=1.0A
VR=VRRM, TA=25°C
DC Reverse Current at Rated DC Blocking
IR
Voltage
VR=VRRM, TA=100°C
Junction Capacitance Per Element (Note 1)
CJ
Notes: 1. Measured at 1.0MHz and applied reverse voltage of 4.0V D.C.
2. Mounted on P.C.B with 0.51"×0.51"(13×13mm) copper pads.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN
TYP MAX UNIT
1.10
V
10
μA
500 μA
25
pF
2 of 4
QW-R227-002.A
DB106G

DIODE
TYPICAL CHARACTERISTICS
Mximum Non-repetitive Surge Current
0.8
40
Forward Peak Surge Current (A)
50
0.6
0.4
0.2
0
100
50
Ambient Temperature, TA (°C)
20
10
0
150
Pulse Wldth 8.3ms
SINGLE HALF-SINE-WAVE
(Jedec Method)
1
2
5
10
20
50
100
Number Ofcycles At 60Hz
Junction Capacitance (pF)
Junction Capacitance (pF)
Instantaneous Forward
Current (A)
0.1
Single Phase Half
Wave 60Hz Resistive
or Inductive Load
30
Instantaneous Reverse Current (μA)
Average Forward Current (A)
Forward Current Derating Curve
1.0
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 4
QW-R227-002.A
DB106G
DIODE
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
4 of 4
QW-R227-002.A
Similar pages