Specification Sheet

TRG45A Series
SINGLE OUTPUT
FEATURES
•
•
•
•
•
•
•
•
Wide input voltage
Continuous short circuit protection
Over voltage protection
Output voltage available from 12VDC to 48VDC
High efficiency 87% typical
Meets EN55022 Class ”B”, conducted emissions
MEPS compliance, Efficiency Mark V
ROHS compliance
SPECIFICATIONS
STANDARDS AND APPROVALS
INPUT
Safety standards
Queensland Electrical Safety Office
Certificate of approval Qld Q090052,
AS/NZS 609050.1:2003, EN60950
Voltage range
90 to 264Vac
Frequency
47Hz to 63Hz
Inrush current
70A max @ 240Vac
C-tick
AS/NZS CISPR 11:2002 Group 1
Isolation
Input to Output 4,242Vdc
EMI standards
Meets EN55022 Class B and CISPR/FCC Class B
Leakage current
3.5mA max.
RCM
Complies with AS/NZS 4417 Parts 1,2,3 N911
OUTPUT
MECHANICAL
Output voltage
Factory preset, see table (not adjustable)
Dimensions
132 x 58 x 30mm
Voltage set-point
+ 2% 60% full load
Weight
280g
Ripple and noise
1% p-p max
AC Inlet
IEC320/C14
Short circuit protection
Continuous (Auto recovery)
Output connector
Over voltage protection
Yes
Hold-up time
Load regulation
8ms typ @ 115Vac
+/-2 to +/-3% (20% to 100% load)
Model Dependent
+/-1% max 100Vac to 240Vac at full load
Right angle, hollow barrel connector, 2.5mm
inside diameter; 5.5mm outside diameter;
9.5mm length Center positive polarity.
DC cord length
720mm with ferrite core 18AWG/UL1185
Line regulation
EXTERNAL POWER SUPPLY
4 5 W AT T S - A C / D C G E N E R A L
SELECTION TABLE
Consult Powerbox for variation of ouput connector and DC Cord lengths
ENVIRONMENTAL
Operating temperature
Load derating
Storage temperature
0°C to +60°C
Derate from 100% at 40°C linearly to 60% at
60°C
-20°C t+85°C
TECHNICAL ILLUSTRATION
Doc. No. PBC9 Rev.C 28-4-11
RATED
VNOM
OUTPUT
CURRENT
MAX POWER
TRG45A120- 21E11-V
12Vdc
3.75A
45W
TRG45A150- 21E11-V
15Vdc
3.00A
45W
TRG45A180- 21E11-V
18Vdc
2.50A
45W
TRG45A190- 21E11-V
19Vdc
2.37A
45W
TRG45A240- 21E11-V
24Vdc
1.88A
45W
TRG45A480- 21E11-V
48Vdc
1.00A
48W
MODEL NUMBER
Powering Progress – www.powerbox.com.au
285