Panduit Pre-Configured Physical Infrastructure VSPEX* 1 Cabinet, 1 Chassis Growth MDS Solution CQSE1GM679 Overview Panduit utilizes extensive converged infrastructure experience in providing the optimal physical infrastructure to support an integrated cloud deployment. Our validated designs include an appropriately-sized dynamic (shippable) cabinet, pre-labeled connectivity bundles, proper grounding, effective thermal and cable management. Panduit evaluates power, thermal, and connectivity requirements of each active component. From this, a balanced and scalable rack elevation is created, integrated port-to-port network map is established, CFD analysis is conducted, and proper load balancing is calculated. Pre-assembled and kitted solutions provide significant time savings, reduced risk and lowest TCO throughout procurement, installation, and upgrade phases. This converged solution features a pre-engineered layout that arrives ready for rapid and reliable deployment. Technical Information Connectivity for VSPEX* 1 Cabinet, 1 Chassis with expansion and SAN Switches 1 server chassis (UCS^ 5108) 2 fabric interconnects (Cisco^ 6248UP) Dual disk controllers (EMC* VNX* 5200, 5400, or 5600) 2 SAN switches (ex. Cisco MDS 9148/ Brocade 6510) Always follow active equipment manufacturer’s recommended installation procedure. Do not ship Cisco UCS B-Series Servers installed in cabinet. Use original equipment packaging for shipment. No Disruption Expansion Server expansion via unused blade slots or additional chassis Up to 5 total 3 RU DAE’s and/or backup devices Cabinet 600 x 1200 42 RU on dynamic shippable shock pallet 79.8"H x 23.6"W x 48.0"D (2026mm x 600mm x 1219mm) Packaged cabinet height: 85 in. (219 cm) Detailed Installation Guide Step-by-step assembly Front and rear rack elevations Port-to-port mapping by device Labeled cables grouped by device with specific, easy to follow guide Active equipment not included. Image may not be representative of actual equipment elevation. Other VM Solutions Available VSPEX* 1 Cabinet, 1 Chassis Solution for Cisco in 600 x 1200 Dynamic Cabinet CQSE1679 VSPEX* 1 Cabinet, 1 Chassis Growth Solution for Cisco in 600 x 1200 Dynamic Cabinet CQSE1G679 VSPEX* 1 Cabinet, 2 Chassis Solution for Cisco in 600 x 1200 Dynamic Cabinet CQSE2679 These solutions can be ordered through EMC* Technology Connect – Select (http://www.emc.com/select) *EMC, VNX, and VSPEX are registered trademarks of EMC Corporation. ^ Cisco and UCS are registered trademarks of Cisco System's Inc. and/or its affiliates in the United States and certain other countries. w w w. p a n d u it.c o m Pre-Configured Physical Infrastructure for VSPEX* 1 Cabinet, 1 Chassis Growth MDS Key Features and Benefits Dynamic cabinet Allows for shipment of installed equipment Single cabinet 600 x 1200 – 42 RU Side panels, casters, shock pallet, and ramp Always follow equipment manufacturer’s recommended installation procedure. Do not ship Cisco^ UCS^ B-Series Servers installed in cabinet. Use original equipment packaging for shipment. Connectivity package Port-to-port labeling reduces installation time while following industry best practices for network device connectivity. Chassis to Fabric Interconnects (10GbE Twinax) Disk Controllers to SAN switch FC (10 GbE LC Fiber) SAN Switch to Fabric Interconnect (10 GbE LC Fiber) Network Uplink Fabric Interconnect to Patch Panel (10 GbE LC Fiber) Unshielded copper Fabric Interconnect cabling (L1-L1/L2-L2), Device Management to Patch Panel (Category 6) Does not include EMC supplied interconnect cables. Thermal solutions Customer patch panel Thermal analysis and testing to provide a robust operating margin. Thermal ducting panels included when required to ensure improved airflow to the switch for optimal thermal temperatures and promote hot/cold aisle segregation. Validated Thermal Solution Tool-less blanking panels included to maintain cold aisle containment Allows flexible connectivity of equipment to customer network. (1) 48-port panel Net-Direct Air Ducts to provide cold aisle air flow for SAN switches Panduit part number: CQSE1GM679 Active gear not included. Refer to patch panel section below in recommended accessories. Grounding and bonding Cable management Features components to ensure best practices for grounding equipment; each system includes cabinet to facility ground and paint piercing grounding cage nuts from equipment to cabinet. (4) 6AWG Ground cables for switches Manages cables away from equipment airflow and provides proper bend radius at each rack unit, ensuring cable routing and management best practices. Fingers at every RU (1) ESD Wrist Strap for End User D-Ring Cable Manager at Switches Recommended Accessories (Ordered Separately) Customer Patch Panel Components – A network interface panel is included in each Panduit Pre-Configured Physical Infrastructure Solution configuration to facilitate connection to the existing data center infrastructure. Panduit offers a variety of QuickNet™ Patch Panel accessories to allow connection of multiple media types (copper and fiber) in a variety of termination methods (pre-terminated cassettes, Mini-Com® Modules and/or field termination) providing scalability and flexibility for changing network requirements. See more details on QuickNet™ Patch Panels at www.panduit.com. Power Distribution Units (PDU) – Panduit vertical power strips offer a convenient way to distribute power to active equipment within racks and cabinets. Panduit recommends the following PDU options which are sized to support this configuration with full redundancy: Q1N2B1L2N30AHA0 USA Network PDU, Vert, 30A, Single phase, L6-30P Plug, 208V, (24)C-13/(6)C-19 Rec Qty. 4 Q1N2B3J2M30AHA0 Europe/Korea Network PDU, Vert, 32A, Single phase, IEC 60309, 230V, (24)C-13/(6)C-19 Rec Qty. 4 Q1N2B1P3N30AHA0 USA Network PDU, Vert, 30A, 3-phase WYE, L21-30P Plug, 208V, (24)C-13/(6)C-19 Rec Qty. 2 Q1N2B2P6M30AHA0 Europe/Korea Network PDU, Vert, 32A, 3-phase WYE, IEC 60309 Plug, 230V, (24)C-13/(6)C-19 Rec Qty. 2 QZ1B1N3BN30P1J Japan Network PDU, Vert, 30A, 3-phase delta, L15-30P Plug, 200V, (24)C-13/(6)C-19 Rec Qty. 2 *EMC and VSPEX are registered trademarks of EMC Corporation. ^ Cisco and UCS are registered trademarks of Cisco System's Inc. and/or its affiliates in the United States and certain other countries. WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario [email protected] Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK [email protected] Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore [email protected] Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan [email protected] Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico [email protected] Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia [email protected] Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com/vspex Contact Customer Service by email: [email protected] ©2014 Panduit Corp. ALL RIGHTS RESERVED. Printed in the U.S.A. CQSE1GM679 12/2014