M9 P0.75 4 4.3 3 M9 13 1 25.5 Ø 9.2 11.7 Ø6.0 7 9.5 2.5 8.2 Ø6 3 2 Panel Cutout/PCB Layout Panel Cutout 9.5 4 C U I Inc., 2007 RE25V 11.7 RE25S 2 1 5-Ø1 8 0V B A +V L 15 18 8 9.8 RE25F L 12 18.0 L = 8, 12 PC Board Panel Cutout/PCB Layout 9.8 2.5x3 6 RE25C Panel Cutout M9 4 3 Ø9.2 6 8-Ø1 2 1 M9 11.7 13 11 Ø9.2 8.2 Ø6.0 Ø6.0 25.5 11.7 9.5 9.5 4 3 2 1 L 8 12 L 18.0 18.6 19.2 SPECIFICATIONS OUTPUT CIRCUIT ENVIRONMENTAL 1. Operating Temp: 0° to +60° C 2. Storage Temp: -20° to +80° C 3. Humidity: 85% RH, no condensation 4. Vibration: 10~55 Hz, 1.5 mm, 2 hrs 5. Shock: 50G, 6ms, 3 axes, 3 reps 9.8 ORDERING INSTRUCTIONS 1 +5V ELECTRICAL 1. Input Power: 5.0 VDC ±10% @ 10mA 3.3 VDC ±10% @ 10mA 2. Output Voltage: H = Vcc- 0.4V L 0.4V 3. Resolution: 16, 25 PPR 3. Output Type: TTL/CMOS Compatible 4. Max. Freq. Response: 500 Hz MECHANICAL 1. Max Shaft Load, radial: 1.0 kgf axial: 1.0 kgf 2. Rotational Angle: 360° continuous 3. Click Torque: 100 gf cm max. 4. Rotational Life: 2.5 x 106 cycles 150 2.5x3 9.8 2 Ch A 3 Ch B RE25X X XX C XX R X Input Voltage: A: 5V±5% input B: 3.3V input Type: N: Non-drip proof Termination Options: S: Solder hole C: Cable Type V: Vertical mount F: Front mount 4 0V Detent: C: Detent Only Resolution: 16: 16 PPR 25: 25 PPR R: Round shaft Shaft Length: 16: 16mm shaft 20: 20mm shaft OUTPUT WAVEFORM Clockwise rotation viewed from front C U I Inc. 20050 SW 112th Ave. Tualatin, OR 97062 Ch A Tel: 503/612-2300 FAX: 503/612-2383 DRAWN BY Ch B JRH Detent position PART NO. UPDATED 03/22/07 CHECKED 03/22/07 UNIT MM REV. RE25XXXXCXXX A