Datasheet

For more information, please visit the product page
|
For information on related products, view External Power Supplies
date
05/18/2016
page
1 of 3
MODEL: PJ-082BH │ DESCRIPTION: DC POWER JACK
FEATURES
• 10 A current rating
• shielded
• no internal switch
RoHS
SPECIFICATIONS
parameter
conditions/description
min
rated input voltage
typ
rated input current
contact resistance1
between terminal and mating plug
between terminal in a closed circuit
insulation resistance
at 500 Vdc
voltage withstand
at 50/60Hz for 1 minute
0.3
-25
life
Notes:
10
A
50
30
mΩ
mΩ
MΩ
any direction for 10 seconds
operating temperature
units
Vdc
100
insertion/withdrawl force
terminal strength
max
24
500
Vac
3
kg
500
g
85
5,000
°C
cycles
1. When measured at a current of less than 100 mA / 1 kHz
SOLDERABILITY
parameter
conditions/description
min
typ
max
units
wave soldering
dipped in solder pot for 5 ±0.5 seconds at
255
260
265
°C
cui.com
For more information, please visit the product page
|
For information on related products, view External Power Supplies
CUI Inc │ MODEL: PJ-082BH │ DESCRIPTION: DC POWER JACK
date 05/18/2016 │ page 2 of 3
MECHANICAL DRAWING
units: mm
TOLERANCE:
X.X ±0.2mm
X.XX ±0.1mm
X.XXX ±0.05mm
MATERIAL
PLATING
terminal 1
brass
silver
terminal 2
copper alloy
silver
stopper
cold rolled steel
nickel
shield A
cold rolled steel
nickel
shield B
stainless steel
plastic
PA6T
Schematic
MATING PLUG
Rating: 20 Vdc, 7 A
MATING PLUG
Rating: 20 Vdc, 10 A
Jack Insertion Depth: 8.23mm
cui.com
Model
Center Pin
PJ-082BH
ø2.5 mm
For more information, please visit the product page
|
For information on related products, view External Power Supplies
CUI Inc │ MODEL: PJ-082BH │ DESCRIPTION: DC POWER JACK
date 05/18/2016 │ page 3 of 3
REVISION HISTORY
rev.
description
date
1.0
initial release
03/23/2012
1.01
increased voltage rating
05/18/2016
The revision history provided is for informational purposes only and is believed to be accurate.
Headquarters
20050 SW 112th Ave.
Tualatin, OR 97062
800.275.4899
Fax 503.612.2383
cui.com
[email protected]
CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website.
CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is
assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use.
CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical
component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to
affect its safety or effectiveness.