UTC KSA1625 PNP EPITAXIAL SILICON TRANSISTOR HIGH VOLTAGE TRANSISTOR FEATURES *Collector-Emitter voltage: VCEO=-400V *Collector Dissipation: Pc(max)=625mW *Low collector-Emitter saturation voltage 1 APPLICATIONS *Telephone switching *High voltage switch TO-92 1:EMITTER 2: COLLECTOR 3: BASE ABSOLUTE MAXIMUM RATINGS ( Operating temperature range applies unless otherwise specified ) PARAMETER SYMBOL RATINGS UNIT VCBO VCEO VEBO Pc Ic Tj TSTG -400 -400 -6 625 -300 150 -55 ~ +150 V V V mW mA °C °C Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector dissipation(Ta=25°C) Collector current Junction Temperature Storage Temperature ELECTRICAL CHARACTERISTICS(Tj=25°C,unless otherwise specified) PARAMETER SYMBOL Collector-base breakdown voltage Collector-emitter breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cut-off current Collector cut-off current Emitter cut-off current DC current gain(note) BVCBO BVCEO BVCES BVEBO ICBO ICES IEBO hFE Collector-emitter saturation voltage VCE(sat) Base-emitter saturation voltage VBE(sat) Output capacitance Cob Note: Pulse test:PW<300µs, Duty Cycle<2% UTC TEST CONDITIONS Ic=-100µA,IE=0 Ic=-1mA,IB=0 Ic=-100µA,VBE=0 IE=-100µA,Ic=0 VCB=-300V,IE=0 VCB=-400V,VBE=0 VEB=-4V,Ic=0 VCE=-10V,Ic=-1mA VCE=-10V,Ic=-10mA VCE=-10V,Ic=-50mA VCE=-10V,Ic=-100mA Ic=-10mA,IB=-1mA Ic=-50mA,IB=-5mA Ic=-10mA,IB=-1mA VCB=-20V,IE=0, f=1MHz MIN TYP MAX UNIT -100 -1 100 V V V V nA µA nA -400 -400 -400 -5 60 70 70 40 UNISONIC TECHNOLOGIES CO. LTD 300 -0.20 -0.5 -0.75 7 V V pF 1 QW-R201-067,A UTC KSA1625 PNP EPITAXIAL SILICON TRANSISTOR TYPICAL PARAMETERS PERFORMANCE Fig.2 Base-emitter saturation voltage Fig.1 Dc current gain -10 1000 100 VBE(sat) (V) 10 1 -1 -10 -100 -1000 -0.1 -0.01 -1 -10 -100 -1000 Ic,Collector current(mA) Ic,Collector current(mA) Fig.3 Collector-emitter saturation voltage Fig.4 Collector Output capacitance -10 1000 Ic=10*IB VCE(sat) (V) Ic=10*IB -1.0 -1.0 -0.1 -0.01 Collector Output capacitance(pF) HFE,DC current Gain VCE=-10V IE=0,f=1MHz 100 10 1 -1 -10 -100 Ic,Collector current(mA) -0.1 -1 -10 -100 Collector base voltage(V) UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UTC UNISONIC TECHNOLOGIES CO. LTD 2 QW-R201-067,A