ROHM RSX051VA-30

RSX051VA-30
Diodes
Shottky barrier diode
RSX051VA-30
zExternal dimensions (Unit : mm)
ROHM :
EIAJ : −
JEDEC :
zStructure
Silicon Epitaxial Planer
1.45±0.1
0.17±0.1
0.05
0.4±0.1
P
zFeatures
1) Small power mold type. (TUMD2 (1913) )
2) High reliability.
3) Low VF / Low IR. (0.35V at 0.7A / 40µA at 30V)
CATHODE MARK
2.5±0.2
0.8±0.05
1.9±0.1
zApplication
General rectification.
0.6±0.2
0.1
1.3±0.1
zAbsolute maximum ratings (Ta=25°C)
Parameter
Reverse voltage (repetitive peak)
Reverse voltage (DC)
Average rectified forward current
Forward current surge peak (60Hz / 1cyc.)
Junction temperature
Storage temperature
Symbol
VRM
VR
IO
IFSM
Tj
Tstg
Limits
30
30
0.5
5
150
−40 to 150
Unit
V
V
A
A
°C
°C
zElectrical characteristics (Ta=25°C)
Parameter
Forward voltage
Reverse current
Capacitance between terminals
Symbol
VF1
IR2
CT
Min.
−
−
−
Typ.
0.35
40
30
Max.
0.39
200
−
Unit
V
µA
pF
Conditions
IF=0.5A
VR=30V
VR=10V, f=1MHz
Rev.A
1/2
RSX051VA-30
Diodes
zElectrical characteristic curves (Ta=25°C)
REVERSE CURRENT : IR (µA)
10
100
200
300
400
1000
Ta=75°C
100
Ta=25°C
10
1
500
0
10
10
30
20
100
0
10
20
30
REVERSE VOLTAGE : VR (V)
REVERSE VOLTAGE : VR (V)
Fig.1 Forward Temperature
Characteristics
Fig.2 Reverse Temperature
Characteristics
Fig.3 Capacitance Between
Terminals Characteristics
TUMD2
Rth (j-a) =145°C / W
When mounted on a glass epoxy board.
θ (j-a) (°C / W)
Ta=125°C
f=1MHz
Ta=25°C
FORWARD VOLTAGE : VF (mV)
1000
100
10
1
0.1
10000
1
10
100
1000
It (s)
Fig.4
20
1.2
1.0
0.8
DC
0.6
D=1 / 2
Sin (θ=180)
0.4
0A
IO
0V
0.2
VR
D=t / T
VR=15V
Tj=150°C
t
T
0.0
0
25
50
75
100
125
AMBIENT TEMPERATURE : Ta (°C)
Fig.5 Derating Curve (IO-Ta)
150
AVERAGE RECTIFIED FOWARD CURRENT : IO (A)
0
TERMINAL CAPACITANCE : CT (pF)
Ta=150°C
100
1
1000
100000
Ta=150°C
Ta=125°C
Ta=75°C
Ta=25°C
AVERAGE RECTIFIED FOWARD CURRENT : IO (A)
FORWARD CURRENT : IF (mA)
1000
1.2
1.0
0.8
DC
0.6
D=1 / 2
Sin (θ=180)
0.4
0.2
0A
IO
0V
VR
t
T
0.0
0
25
D=t / T
VR=15V
Tj=150°C
50
75
100
125
150
CASE TEMPERATURE : Tc (°C)
Fig.6 Derating Curve (IO-Tc)
30
Ta=25°C
30kV Over
25
8.3ms 8.3ms
20
ESD (kV)
IFSM (A)
1cyc.
10
15
Ta=25°C
1puls
10
5
0
1
10
100
200pF
0Ω
100pF
1.5kΩ
Machine Model
Humanbody Model
0
N (Cyc)
Fig.7
Fig.8 ESD
Rev.A
2/2
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level of
reliability and the malfunction of with would directly endanger human life (such as medical instruments,
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other
safety devices), please be sure to consult with our sales representative in advance.
About Export Control Order in Japan
Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control
Order in Japan.
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.1