UNISONIC TECHNOLOGIES CO., LTD DTA123E PNP SILICON TRANSISTOR DIGITAL TRANSISTORS (BUILT- IN BIAS RESISTORS) 3 1 2 SOT-23 FEATURES 3 * Built-in bias resistors that implies easy ON/OFF applications. * The bias resistors are thin-film resistors with complete isolation to allow positive input. 1 2 SOT-323 TO-92 ORDERING INFORMATION Order Number Lead Free Halogen Free DTA123EG-AE3-R DTA123EG-AL3-R DTA123EG-AN3-R DTA123EL-T92-K DTA123EG-T92-K DTA123EL-T92-B DTA123EG-T92-B Note: Pin assignment: G: GND I: IN O: OUT 1 2 SOT-523 EQUIVALENT CIRCUIT 1 3 Package SOT-23 SOT-323 SOT-523 TO-92 TO-92 Pin Assignment 1 2 3 G I O G I O G I O G O I G O I Packing Tape Reel Tape Reel Tape Reel Bulk Tape Box MARKING SOT-23 / SOT-323 / SOT-523 www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd TO-92 1 of 3 QW-R206-086.D DTA123E PNP SILICON TRANSISTOR ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified) PARAMETER RATINGS UNIT -50 V -12 ~ +10 V -100 mA SOT-523 150 mW Power Dissipation PD SOT-23/SOT-323 200 mW TO-92 625 mW Junction Temperature TJ +150 °C Storage Temperature TSTG -55 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. Supply Voltage Input Voltage Output Current SYMBOL VCC VIN IOUT ELECTRICAL SPECIFICATIONS (TA=25°C, unless otherwise specified) PARAMETER SYMBOL VIN(OFF) Input Voltage VIN(ON) Output Voltage VOUT(ON) Input Current IIN Output Current IOUT(OFF) DC Current Gain GIN Input Resistance R1 Resistance Ratio R2/R1 Transition Frequency fT Note: Transition frequency of the device. TEST CONDITIONS VCC =-5V, IOUT =-100μA VOUT =-0.3V, IOUT =-20mA IOUT/IIN =10mA/-0.5mA VIN=-5V VCC =-50V, VIN =0V VOUT =-5V, IOUT =-20mA VCE =-10V, IE =−5mA, f=100MHz (Note) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX -0.5 UNIT -0.1 -0.3 -3.8 -0.5 V mA μA 2.2 1 250 2.86 1.2 KΩ -3 20 1.54 0.8 V MHz 2 of 3 QW-R206-086.D DTA123E PNP SILICON TRANSISTOR TYPICAL CHARACTERISTIC UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R206-086.D