Datasheet

D-sub Connectors
XM2/XM3
D-sub Connectors Are Ideal for Office
Automation Interfacing.
■ Shielded against EMI.
■ Metallized plastic Hood (XM2S) provides excel-
lent noise protection.
■ A new line of multi-hole, ferrite-core Connectors
(XM3B-F) offers space-saving design and superior noise protection at high frequency.
■ Fitted in a rugged, compact metal shell.
■ Many kinds of standard Anchors and grounding
fixtures available.
■ The XM2/XM3 conform to UL standards (No.
E103202) (XM2S and some other models are not
included)
RoHS Compliant
■ Terminology
z EMI
z ESD
Abbreviation of ElectroMagnetic Interference (noise)
Abbreviation of ElectroStatic Discharge
z Metallization
z Grounding structure
Here, metallization refers to plating over the plastic hood.
Here, grounding structure refers to a structure where an
unmetallized hood can be grounded by an grounding
plate.
z Shielded connector
Connector having a structure that can be grounded.
z Beating
A processing technique that ensures the contact amongst
the shells by beating a part of the shell.
z Shell
Refers to the case covering the connector. Here, the shell
refers to the metal parts attached to the mating end.
■ Connectors
Model
XM3B
XM3B-F
XM2S
Sockets with right-angle DIP
terminals
(with ferrite core)
Hoods
Appearance
Sockets with right-angle DIP
terminals
Reference page 3 to 4
Model
5
XM3C
10
XM3F
XM3A
XM3D
Plugs with solder-cup
terminals
Sockets with solder-cup
terminals
Appearance
Plugs with right-angle DIP terSockets with straight DIP terminals
minals
Reference page 6 to 7
8
9
1
■ Ratings and Characteristics
Model Plugs with Solder Cup Terminals: XM3A
Socket with right-angle DIP Terminals: XM3B
Socket with right-angle DIP Terminals (with ferrite core):
XM3B-F
Plugs with Right-angle DIP Terminals: All XM3C models
except those with 37 pins
XM3C-0922-@@@
XM3C-1522-@@@
XM3C-2522-@@@
Sockets with Solder Cup Terminals: XM3D
Sockets with Straight DIP Terminals: XM3F
Item
Rated current
5A
Rated voltage
300 VAC
Contact resistance
15 mΩ max. (at 20 mVDC, 100 mA max.)
Plugs with Right-angle DIP Terminals: XM3C
models with 37 pins
XM3C-3722-@@@
Hoods
XM2S
3A
Insulation resistance
1,000 MΩ min. (at 500 V DC)
Dielectric strength
1,000 VAC for 1 min (leakage current: 1 mA max.)
Total insertion force
Number of pins × 3.33 N max
Removal force
0.29 N min. (for gauge diameter of 0.99 mm)
Insertion durability
200 times
Ambient operating
temperature
−55°C to 105°C (with no icing)
Shield performance
Mounted in panel: 25 dB min. (30 to 900 MHz)
Mounted on board: 20 dB min. (30 to 300 MHz)
---
−25°C to 85°C
---
■ Materials and Finish
Item
Model
XM3B
XM3B-F
XM3C
XM3F
Fiber-glass reinforced PBT resin (UL94V-0)/black
Housing
Mating
end
Phosphor bronze/nickel base, gold plated (0.4 µm)
Terminals
Phosphor bronze/nickel base, tin
plated (2 µm)
Contacts
Shell
Phosphor bronze/nickel base, tin
plated (3 µm)
Steel/nickel
■ Applicable Wires
The applicable wires for solder cup terminals are AWG 22 to 28 (solid or stranded).
2
D-sub Connectors
XM2/XM3
XM3A
XM3D
Fiber-glass reinforced PBT resin
(UL94V-0)/Milky white
Bronze/nickel
base, gold plated
(0.4 µm)
Phosphor
bronze/nickel
base, gold plated
(0.4 µm)
Bronze/nickel
base, tin plated
(3 µm)
Phosphor
bronze/nickel
base, tin plated
(3 µm)
XM2S
ABS resin/nickel
plated
---
XM3C Plugs with Right-angle DIP Terminals
■ Model Number Legend
XM3C-@@22-@@@
1 2 3
3. Grounding Fixture
1: Tap Hole Grounding Fixture
2: Lock Pin Grounding Fixture
1. Anchor specifications
1: With Anchor 2
5: No anchors
2. Anchor screw specifications
1: M2.6 × 0.45 metric screws
3: Inch screws
0: No anchors
Note: Anchors and Grounding Fixtures are not supplied if 1, 2, and 3
are blank.
■ Dimensions
(unit: mm)
DIP Terminals
XM3C-@@22 (No Anchors or Grounding Fixtures)
XM3C-@@22-501 (No Anchors, with Tap Hole Grounding Fixtures)
XM3C-@@22-502 (No Anchors, with Lock Pin Grounding Fixtures)
XM3C-@@22-111 (With Anchor 2 and Tap Hole Grounding Fixtures)
XM3C-@@22-112 (With Anchor 2 and Lock Pin Grounding Fixtures)
A
B
C
D
E
F
G
3.2
6.25
12.5
25-contact model shown above.
(No Anchor or Grounding Fixtures)
N
N-1
8.35
2
1
Two, 3.1 dia.
Note: XM3C Terminals were manufactured in accordance with JIS X 5101. Terminal pitches are a
mixed arrangement of 2.77- and 2.74-mm contacts on 25- and 37-contact models as specified
in the JIS standard. A pitch of 2.76 mm is recommended for the mounting holes because of
the more advanced numerical control available
today. This is sufficient to avoid any problems.
5.9
18.5
0.3
3.6
2.84
9.6
3.3
3.0
B
Dimensions
Mounting holes (t = 1.6 mm, bottom view)
No. of
contacts
B±0.1
D±0.1
E±0.1
F±0.1
15.5
9.9
N-1 N
1 2
3.0
1±0.1 dia.
2.84±0.1
Two, 3.2±0.1 dia.
F±0.1
6
D-sub Connectors
XM2
A
B
C
D
E
F
G
9
30.8
24.99
16.91
10.96
8.22
2.74
1.37
15
39.1
33.32
25.25
19.18
16.44
2.74
1.37
25
53.0
47.04
38.96
33.12
30.36
2.76
1.38
37
69.3
63.50
55.42
49.68
46.92
2.76
1.38
■ Ordering Information
Anchor 2 and Tap Hole Grounding Fixtures
Appearance
No anchors or Grounding Fixtures
Lock Pin Grounding Fixture
Tap Hole Grounding Fixture
Anchor 2
Anchor 2
XM2Z-0011 Anchor 2 (M2.6 × 0.45 metric screws)
Accessories
No. of
contacts
Anchor 2 and Lock Pin Grounding
Fixtures
Tap Hole Grounding Fixtures
---
Lock Pin Grounding Fixtures
---
9
XM3C-0922-111
XM3C-0922-112
XM3C-0922
15
XM3C-1522-111
XM3C-1522-112
XM3C-1522
25
XM3C-2522-111
XM3C-2522-112
XM3C-2522
37
XM3C-3722-111
XM3C-3722-112
XM3C-3722
No anchors, with Tap Hole Grounding
Fixtures
Appearance
Tap Hole Grounding Fixture
Accessories
No. of
contacts
No anchors, with Lock Pin Grounding
Fixtures
Lock Pin Grounding Fixture
No anchors
Tap Hole Grounding Fixtures
Lock Pin Grounding Fixtures
9
XM3C-0922-501
XM3C-0922-502
15
XM3C-1522-501
XM3C-1522-502
25
XM3C-2522-501
XM3C-2522-502
37
XM3C-3722-501
XM3C-3722-502
Note: The XM3C-@@22-111/-112 with Anchor 2 (M2.6 × 0.45) and Grounding Fixtures as well as the XM3C-@@22-501/-502 with Grounding Fixtures and no Anchor are available as standard models. Two M3 × 0.5 Tap Hole Grounding Fixtures and an M3 × 0.5 Lock Pin Grounding
Fixture for the Anchor side are provided.
Contact your OMRON representative for other anchor and grounding fixture specifications. See Accessories (Sold Separately) of XM2/XM3
for details on accesories.
D-sub Connectors
XM2
7
Similar pages