UNISONIC TECHNOLOGIES CO., LTD 2SD1071 Preliminary NPN EPITAXIAL SILICON TRANSISTOR HIGH VOLTAGE POWER AMPLIFIER DESCRIPTION The UTC 2SD1071 is a high voltage power amplifier, it uses UTC advanced technology to provide the customers high DC current gain and low saturation voltage, etc. The UTC 2SD1071 is suitable for general purpose power amplifier and Motor controls, etc. FEATURES * Low saturation voltage * High DC current gain EQUIVALENT CIRCUIT Z-Di C B Diode RBE1 RBE2 E ORDERING INFORMATION Ordering Number Package Lead Free Halogen Free 2SD1071L-TA3-T 2SD1071G-TA3-T TO-220 Note: Pin Assignment: E: Emitter C: Collector B: Base Pin Assignment 1 2 3 B C E Packing Tube MARKING www.unisonic.com.tw Copyright © 2016 Unisonic Technologies Co., Ltd 1 of 3 QW-R203-043.c 2SD1071 Preliminary NPN EPITAXIAL SILICON TRANSISTOR ABSOLUTE MAXIMUM RATINGS (TC=25°C) PARAMETER SYMBOL RATINGS UNIT Collector to Base Voltage VCBO 300 V Collector to Emitter Voltage VCEO 300 V Emitter to Base Voltage VEBO 6 V Collector Current IC 6 A Base Current IB 2.5 A Collector Dissipation PC 40 W Junction Temperature TJ +150 C Storage Temperature TSTG -40~+150 C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER Junction to Case SYMBOL θJC RATINGS 3 UNIT °C/W ELECTRICAL CHARACTERISTICS (TC =25°C) PARAMETER Collector to Base Voltage Collector to Emitter Voltage Emitter to Base Voltage Collector Cut-Off Current Emitter Cut-Off Current DC Current Gain Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage SYMBOL VCBO VCEO VEBO ICBO IEBO hFE VCE(SAT) VBE(SAT) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TEST CONDITIONS ICBO=1mA ICEO=1mA IEBO=150mA VCBO=250V VEBO=6V VCE=2V, IC=4A IC=4A, IB=15mA MIN 300 300 6 TYP MAX UNIT V V V 0.1 mA 150 mA 500 1.5 2.0 V V 2 of 3 QW-R203-043.c 2SD1071 Preliminary NPN EPITAXIAL SILICON TRANSISTOR UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R203-043.c