UNISONIC TECHNOLOGIES CO., LTD UMT1N Preliminary DUAL TRANSISTOR GENERAL PURPOSE TRANSISTOR DESCRIPTION The UTC UMT1N is a dual transistor, including two PNP transistors. It uses UTC’s advanced technology to provide the customers with high DC current gain, etc. FEATURES * High DC current gain (hFE>120@VCE=-6V, IC=-1mA) EQUIVALENT CIRCUITS ORDERING INFORMATION Ordering Number Lead Free Halogen Free UMT1NL-AL6-R UMT1NG-AL6-R Package SOT-363 1 E1 Pin Assignment 2 3 4 5 B1 C2 E2 B2 6 C1 Packing Tape Reel MARKING 6 5 4 T1N 1 2 L: Lead Free G: Halogen Free 3 www.unisonic.com.tw Copyright © 2013 Unisonic Technologies Co., Ltd 1 of 3 QW-R218-025.a UMT1N Preliminary DUAL TRANSISTOR ABSOLUTE MAXIMUM RATINGS (TA=25°C) PARAMETER SYMBOL RATINGS UNIT Collector-Base Voltage VCBO -60 V Collector-Emitter Voltage VCEO -50 V Emitter-Base Voltage VEBO -6 V Collector Current IC -0.15 A (DC) Collector Power Dissipation Pc 0.15 W Junction Temperature TJ 150 °C Storage Temperature TSTG -55~150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL CHARACTERISTICS (TA=25°C) PARAMETER Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage Collector CutOff Current Emitter CutOff Current Collector-Emitter Saturation Voltage DC Current Transfer Ratio Transition Frequency Output Capacitance SYMBOL BVCBO BVCEO BVEBO ICBO IEBO VCE(SAT) hFE fT Cob www.unisonic.com.tw Copyright © 2013 Unisonic Technologies Co., Ltd TEST CONDITIONS IC=-50µA IC=-1mA IE=-50µA VCB=-60V VEB=-6V IC/IB=-50mA/-5mA VCE=-6V, IC=-1mA VCE=-12V, IE=2mA, f=100MHz VCB=-12V, IE=0A, f=1MHz MIN -60 -50 -6 TYP MAX -0.1 -0.1 -0.5 560 120 140 4 5 UNIT V V V µA µA V MHz pF 2 of 3 VER.A UMT1N Preliminary DOUAL TRANSISTOR UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R218-025.a