Power Modules Intelligent Power Module (IPM) with optional PFC New flowIPM family with integrated driver circuit and shunt resistors. flowIPM 1B housing 72 x 36 x 16 mm General Features: • Output power at 230V input: up to 2kW • 1~ Rectifier, 3~ Inverter • Optional PFC circuit with Si or SiC boost diode • Integrated gate drivers with complete bootstrap circuit • Overcurrent protection • Ultra low inductive design with integrated DC-capacitor • Laser trimmed shunt resistors for PFC and inverter current • Temperature Sensor • 17mm housing, optional with Press-fit pins or phase change material Applications: • Standard motor drives • Fans, pumps, air-conditioning • Professional power tools • Washing machines, refrigerators Short Description: Most common for flowIPM are applications like motor driver circuits up to 1kW output power. The optional PFC circuit helps to gain the maximum possible power efficiency. The compact design and sophisticated thermal management provides the optimum solution for crowded mechanical environments. Vincotech’s flowIPM integrates not only the inverter part, but also rectifier and PFC circuit. The complete driver circuit is also integrated to the module with no need of additional external components. With the integrated shunts, a high-precision Vincotech GmbH Biberger Straße 93 82008 Unterhaching Germany current sensing of the PFC and inverter part is possible. www.vincotech.com Status: Dec-11 Power Modules flowIPM Family Overview Type Pwr fsw PFC Components 1B06INA004SA 1kW - Inverter: 600V/4A 1B06INA010SA 2kW - Inverter 600V/10A 1B06IPA004MF 1kW 50 – 100kHz Inverter: 600V/4A PFC: 600V/350mΩ + ultrafast FRED 1B06IPA004MC 1kW 100 – 200kHz Inverter: 600V/4A PFC: 600V/350mΩ + SiC Diode 1B06IPA010MF 2kW 50 – 100 kHz Inverter 600V/10A PFC: 600V/190mΩ + ultrafast FRED Schematic: Vincotech GmbH Biberger Straße 93 82008 Unterhaching Germany www.vincotech.com Status: Dec-11