UNISONIC TECHNOLOGIES CO., LTD UPRTR5V0U4D DIODE INTEGRATED QUAD ULTRA-LOW CAPACITANCE ESD PROTECTION DESCRIPTION The UTC UPRTR5V0U4D is an integrated quad ultra-low capacitance ESD protection diode array. it uses UTC’s advanced technology to provide customers with low leakage current, 4 ultra-low input capacitance rail-to-rail ESD protection diodes and low clamping voltage, etc. The UTC UPRTR5V0U4D is suitable for DVI, Ethernet and USB2.0, etc. FEATURES * Low clamping voltage * Low leakage current (Max.=100nA) * Four ultra-low input capacitance (typical 1pF) ORDERING INFORMATION Ordering Number Lead Free Halogen Free UPRTR5V0U4DL-AG6-R UPRTR5V0U4DG-AG6-R Package Packing SOT-26 Tape Reel MARKING www.unisonic.com.tw Copyright © 2013 Unisonic Technologies Co., Ltd 1 of 6 QW-R601-077.B UPRTR5V0U4D DIODE PIN CONFIGURATION PIN DESCRIPTION PIN NO. 1 2 3 4 5 6 PIN NAME I/O GND I/O I/O VCC I/O DESCRIPTION Terminal of ESD 1 Ground Terminal of ESD2 Terminal of ESD 3 Supply Voltage Terminal of ESD 4 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 6 QW-R601-077.B UPRTR5V0U4D DIODE ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL VIN Input Voltage RATINGS 0~5.5 UNIT V IEC 61000-4-2 level 4 Contact Discharge 8 kV ESD Voltage (HBM Contact) (Note 2, 3) VESD MIL-STD-883 8 kV Human Body Model Ambient Temperature TA -55~+150 °C Junction Temperature TJ 150 °C Storage Temperature TSTG -65~+150 °C Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. Device stressed with ten non-repetitive ESD pulses. 3. Measured from pin 1, 3, 4 or 6 to pin 2 or 5. ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise specified.) PARAMETER Input/Output to Ground Capacitance SYMBOL C(I/O-GND) Reverse Leakage Current Breakdown Voltage ILR VBR Supply Pin to Ground Capacitance CSUP TEST CONDITIONS V(I/O-GND)=0V, VCC=3.0V, f=1MHz (Note 1) VR=3.0V (Note 1) II=1mA V(I/O-GND)=0V, VCC=3.0V, f=1MHz (Note 2) Forward Voltage VF Notes: 1. Measured from pins 1, 3, 4 and 6 to pin 2. 2. Measured from pin 5 to pin 2. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT 1.0 pF 100 9 6 nA V 40 pF 0.7 V 3 of 6 QW-R601-077.B UPRTR5V0U4D DIODE TYPICAL CHARACTERISTICS HBM +Voltage Waveform HBM -Voltage Waveform UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw HBM +Voltage Waveform HBM -Voltage Waveform 4 of 6 QW-R601-077.B UPRTR5V0U4D DIODE TYPICAL CHARACTERISTICS(Cont.) MM Clamped +8kV ESD voltage waveform HBM Clamped +8kV ESD voltage waveform HBM Clamped -8kV ESD voltage waveform 35 MM Clamped -8kV ESD voltage waveform Typical Zener Breakdown Characteristics 30 25 20 15 10 5 0 0 2 4 6 8 10 12 14 VZ , ZENER VOLTAGE (V) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 6 QW-R601-077.B UPRTR5V0U4D TYPICAL CHARACTERISTICS(Cont.) Input Capacitance(pF) DIODE Typical Variation of CIN vs. Temp(f=1MHz,Vp=3.3V,VIN=30mV.VN=0V.1uF) 8 7 0V DC Input Bias 6 1.65V DC Input Bias 5 4 3 2 1 0 -50 -25 0 50 25 Temperature (°C) 75 100 UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 6 QW-R601-077.B