Datasheet

UNISONIC TECHNOLOGIES CO., LTD
RB501V-40
Preliminary
DIODE
SURFACE MOUNT SCHOTTKY
DIODE

DESCRIPTION
The UTC RB501V-40 is a surface mount schottky diode, it uses
UTC’s advanced technology to provide the customers with high
switching speed and low forward voltage, etc.
The UTC RB501V-40 is suitable for automatic insertion, etc.

FEATURES
* High switching speed
* Low forward voltage


SYMBOL
ORDERING INFORMATION
Ordering Number
RB501VG-40-CB2-R
Note: Pin Assignment: A: Anode
K: Cathode

Package
SOD-323
Pin Assignment
1
2
A
K
Packing
Tape Reel
MARKING
www.unisonic.com.tw
Copyright © 2015 Unisonic Technologies Co., Ltd
1 of 3
QW-R601-084.d
RB501V-40

Preliminary
DIODE
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
RATINGS
UNIT
Maximum Reverse Voltage
VRRM
40
V
RMS Reverse Voltage
VR(RMS)
30
V
Maximum Forward Current
IF(AV)
0.1
A
Maximum Forward Peak Current (f=60Hz)
IFPM
1
A
Power Dissipation (Note 2)
PD
0.4
W
Peak Forward Surge Current at t=8.3ms
IFSM
500
mA
Junction Temperature
TJ
-55~+125
°C
Storage Temperature
TSTG
-55~+125
°C
Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. FR-5 board=1.0*0.75*0.062 in. Minimum pad layout.

THERMAL CHARACTERISTICS
PARAMETER
Junction to Ambient (Note 2)

SYMBOL
θJA
RATINGS
300
UNIT
°C/W
ELECTRICAL CHARACTERISTICS (TJ =25°C, unless otherwise noted)
PARAMETER
Reverse Leakage Current
SYMBOL
IR
Forward Voltage
VF
Total Capacitance
CT
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
TEST CONDITIONS
VR=10V
IF=10mA
IF=100mA
VR=10V, f=1MHz
MIN
TYP MAX UNIT
10
μA
0.34
V
0.55
V
6
pF
2 of 3
QW-R601-084.d
RB501V-40
Preliminary
DIODE
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 3
QW-R601-084.d