UNISONIC TECHNOLOGIES CO., LTD SK86 Preliminary DIODE 8A, 60V SCHOTTKY RECTIFIER DESCRIPTION The UTC SK86 is a schottky rectifier diode, it uses UTC’s advanced technology to provide customers with low forward voltage and high current capability, etc. + - FEATURES SMC * High current capability * Low forward voltage SYMBOL ORDERING INFORMATION Note: Ordering Number Lead Free Halogen Free SK86-SMC-R SK86-SMC-R Pin Assignment: A: Anode, K: Cathode SK86L-SMC-R Package SMC Pin Assignment 1 2 K A (1)Packing Type (1) R: Tape Reel (2)Package Type (2) SMC: SMC (3)Lead Free (3) L: Lead Free, G: Halogen Free www.unisonic.com.tw Copyright © 2013 Unisonic Technologies Co., Ltd Packing Tape Reel 1 of 3 QW-R601-093.a SK86 Preliminary DIODE ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL RATINGS UNIT RMS Voltage VRMS 42 V Recurrent Peak Reverse Voltage VR 60 V DC Blocking Voltage VB 60 V Storage Temperature TSTG -55~+125 °C Operating Temperature TOPR -55~+125 °C Junction Temperature TJ 150 °C Thermal Resistance Junction To Lead θJL 18 °C/W Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL CHARACTERISTICS (TJ =25°C unless otherwise specified.) PARAMETER SYMBOL Average Forward Current IF(AV) Peak Forward Surge Current IFSM Instantaneous Forward Voltage VF DC Reverse Current At IR Rated DC Blocking Voltage Junction Capacitance CJ Note: 1. High temperature solder exemptions applied. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TEST CONDITIONS TL=95°C 8.3ms, Half Sine IFM=8.0A, TJ=25°C (Note 1) TJ=25°C TJ=100°C Measured at 1.0MHz, VR=4.0V MIN TYP MAX UNIT 8.0 A 200 A 0.65 V 1 mA 20 mA 400 pF 2 of 3 QW-R601-093.a SK86 Preliminary DIODE UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R601-093.a