Datasheet

UNISONIC TECHNOLOGIES CO., LTD
MGBR10V45
DIODE
MOS GATED BARRIER
RECTIFIER

DESCRIPTION
The UTC MGBR10V45 is a surface mount mos gated barrier
rectifier, it uses UTC’s advanced technology to provide customers
with low forward voltage drop and high switching speed, etc.

FEATURES
* Very low forward voltage drop
* High switching speed

SYMBOL
TO-220-2

TO-220 / TO-220F
TO-252 / TO-277
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
MGBR10V45L-TA2-T
MGBR10V45G-TA2-T
MGBR10V45L-TA3-T
MGBR10V45G-TA3-T
MGBR10V45L-TF3-T
MGBR10V45G-TF3-T
MGBR10V45L-TN3-R
MGBR10V45G-TN3-R
MGBR10V45L-T27-R
MGBR10V45G-T27-R
Note: Pin Assignment: A: Anode K: Common Cathode

Package
TO-220-2
TO-220
TO-220F
TO-252
TO-277
Pin Assignment
1
2
3
K
A
A
K
A
A
K
A
A
K
A
A
K
A
Packing
Tube
Tape Reel
Tape Reel
Tape Reel
Tape Reel
MARKING
TO-220-2 / TO-220 / TO-220F / TO252
www.unisonic.com.tw
Copyright © 2015 Unisonic Technologies Co., Ltd
TO-277
1 of 3
QW-R601-119.E
MGBR10V45

DIODE
ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified)
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
PARAMETER
SYMBOL
RATINGS
UNIT
DC Blocking Voltage
VRM
45
V
Working Peak Reverse Voltage
VRWM
45
V
Peak Repetitive Reverse Voltage
VRRM
45
V
RMS Reverse Voltage
VR(RMS)
32
V
Average Rectified Output Current
TC=140°C
IO
10
A
Non-Repetitive Peak Forward Surge Current 8.3ms
IFSM
150
A
Single Half Sine-Wave Superimposed on Rated Load
Operating Junction Temperature
TJ
-65~+150
°C
Storage Temperature
TSTG
-65~+150
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.

THERMAL CHARACTERISTICS
PARAMETER
Junction to Ambient
Junction to Case

SYMBOL
TO-220-2/TO-220
TO-220F
TO-252
TO-277
TO-220-2/TO-220
TO-220F
TO-252
TO-277
RATINGS
UNIT
60
θJA
θJC
110
73 (Note 3)
2
3.31
2.5
13 (Note 3)
°C/W
°C/W
ELECTRICAL CHARACTERISTICS (TA =25°C, unless otherwise specified.)
PARAMETER
Reverse Breakdown Voltage (Note 1)
SYMBOL
V(BR)R
TEST CONDITIONS
IR=0.5mA
IF=10A, TJ=25°C
Instantaneous Forward Voltage
VFM
IF=10A, TJ=125°C
VR=45V, TJ=25°C
Leakage Current (Note 1)
IRM
VR=45V, TJ=125°C
Total Capacitance
CT
VR=5V, f=1MHz, TJ=25°C
Notes: 1. Short duration pulse test used to minimize self-heating effect.
2. Thermal resistance junction to case mounted on heatsink.
3. Mounted on an FR4 PCB, single-sided copper, with 100cm2 copper pad area.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN
45
TYP MAX UNIT
V
0.53
V
0.48
V
50
500 μA
12
40
mA
400
pF
2 of 3
QW-R601-119.E
MGBR10V45

DIODE
TYPICAL CHARACTERISTICS
Forward Derating Curve
Typical Forward Characteristics
100
Instantaneous Forward Current (A)
Average Rectified Current (A)
16
14
12
10
8
6
4
2
0
0
25
50
75
100 125 150 175
125°C
25°C
10
1.0
0.1
IF Pulse
Width=300uS
0.2
0.4
0.6
0.8
1.0
Instantaneous Forward Voltage (V)
Case Temperature (°C)
Typical Reverse Characteristics
Instantaneous Reverse Current (A)
1E-1
1E-2
1E-3
1E-4
1E-5
1E-6
1E-7
VR=45V
25
50
75
100
125
150
Case Temperature (°C)
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 3
QW-R601-119.E