UNISONIC TECHNOLOGIES CO., LTD SBL1040C DIODE 10A SCHOTTKY BARRIER RECTIFIER DESCRIPTION The UTC SBL1040C is a 10A schottky barrier rectifier, it uses UTC’s advanced technology to provide the customers with high surge capability, high efficiency, high current capability, low power loss and low forward voltage drop, etc. The UTC SBL1040C is suitable for free wheeling and polarity protection, etc. FEATURES * High surge capability * High efficiency * High current capability * Low power Loss and low forward voltage drop SMYBOL ORDERING INFORMATION Ordering Number Lead Free Halogen Free SBL1040CL-TA3-T SBL1040CG-TA3-T Note: Pin Assignment: A: Anode K: Cathode SBL1040CL-TA3-T Package TO-220 Pin Assignment 1 2 3 A K A Packing Tube (1)Packing Type (1) T: Tube (2)Package Type (2) TA3: TO-220 (3)Green Package (3) L: Lead Free, G: Halogen Free and Lead Free MARKING www.unisonic.com.tw Copyright © 2014 Unisonic Technologies Co., Ltd 1 of 3 QW-R601-183.B SBL1040C DIODE ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified) PARAMETER DC Blocking Voltage Recurrent Peak Reverse Voltage RMS Voltage SYMBOL VRM VRRM VRWM RATINGS 40 40 40 5 10 UNIT V V V Per Leg IO A Total Peak Forward Surge Current 8.3ms Single Half IFSM 110 A Sine-Wave Superimposed on Rated Load Per Diode Operating Junction Temperature TJ -65~+150 °C Storage Temperature TSTG -65~+150 °C Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. Thermal resistance junction to case mounted on heatsink. Average Forward Rectified Current THERMAL CHARACTERISTICS (TA =25°C, unless otherwise noted.) PARAMETER Junction to Ambient Junction to Case SYMBOL θJA θJC RATINGS 62.5 3 UNIT °C/W °C/W ELECTRICAL CHARACTERISTICS (Note 1) (TA =25°C, unless otherwise noted.) PARAMETER SYMBOL TEST CONDITIONS Instantaneous Forward Voltage VF TJ=25°C, IF=5A TJ=25°C, VR=40V Instantaneous Reverse Current at Rated DC IR Blocking Voltage Per Diode TJ=100°C, VR=40V Notes: 1. Pulse Test: 300μs pulse width, 1% duty cycle. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT 0.56 V 200 μA 50 mA 2 of 3 QW-R601-183.B SBL1040C DIODE TYPICAL CHARACTERISTICS UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R601-183.B