S6E2CC series Microcontroller Starter kit Errata sheet This document describes an erratum to the Arduino interface on the S6E2CC series Microcontroller starter kits. Affected Boards SK-FM4-176L-S6E2CC v11 SK-FM4-176L-S6E2CC-ETH v11 SK-FM4-176L-S6E2CC-VOI v11 Errata Content This erratum affects the SPI port connections in CN7 of the Arduino interface on the starter kit. The D11 (MOSI) and D12 (MISO) were accidentally swapped. The SPI port will not communicated with the standard Arduino shield if connected directly. Pin No. Correct Connection Actual Connection D11 Master Out Slave In (MOSI) Master In Slave Out (MISO) D12 Master In Slave Out (MISO) Master Out Slave In (MOSI) Correct connection of SPI port in Arduino interface. CLK-D13 MISO-D12 MOSI-D11 #SS-D10 Fix Status The connection of D11 and D12 will be corrected on v12 hardware.