Spansion FM4 Graphics Controller MCU Starter Kit.pdf

Spansion ® FM4 Graphics Controller MCU
Starter Kit
The Spansion® S6E2DH series graphics controller MCU starter kit provides an
easy to use, cost-effective solution to evaluate an ARM® Cortex®-M4 based
microcontroller that incorporates a dedicated hardware graphics engine allowing
rich display images. The board comes complete with WQVGA TFT display with a
touch sensor and on-board CMSIS-DAP enabling the user to connect directly to a PC
and begin development. In addition to the evaluation board, the Spansion solution
includes a free-of-charge graphics authoring tool and low-level libraries for the
graphics engine.
Spansion’s S6E2DH MCU is ideal for embedded applications with TFT displays such
as home appliances, multi-function printers, industrial equipment, electronic musical
instruments and security systems.
features
• Spansion FM4 S6E2DH MCU
• CMSIS-DAP JTAG adapter
• USB-Device (Type-B connector)
• WQVGA TFT Panel with touch
• 512MB Spansion HyperFlash™ memory for image storage
• 128MB SDRAM for external VRAM
• I2S connection to codec
• SD card interface
Order number: SK-FM4-S6E2DH-TFT
mcu block diagram / features
Flash (Max) 384KB
SRAM (Max) 36KB
MPU
DMA 8ch
DSTC 128ch
ARM‰ Cortex‰-M4F
160MHz (Max)
OCU x 6ch
ICU x 4ch
ADT x 3ch
FRTim x 3ch
Multi-Function Timer
1 unit
Waveform Generator
Base Timer 8ch
CRC
Dual Timer
Pin Relocation
Graphic Subsystem
QPRC 1ch
External IRQs
16ch + NMI
RTC y:m:h;m:s
Hardware Watchdog
FPU
2.7-3.3V
Ta = -40° to +85°C
CR Oscillator 4MHz+/-2%
Clock Supervisor
SWD/TPIU/ETM Debug Ports
MFS 8ch
(UART/SPI/UN/I2C)
USB FS 1ch
(Host + Device)
SD Card I/F
CAN-FD 1ch
512KB VRAM
Graphics Engine
Display Controller
External Bus I/F
I2S 2ch
2MB VFlash (only 26E2DH5GIA)
GPIO 98/154 *a pin (Max)
External SDRAM Bus I/F
HS QSPI *b
HyperBus I/F *b
*a
12-bit ADC
24ch
12-bit ADC
*a
*b
176 pin product only
Except S6E2DH5GJA
starter kit block diagram
5V
(power)
CAN-FD
MFS
Touch Panel
Connector
MFS
RGB
TFT Connector
(RGB 24bit)
DC/DC
Multicon
QPRC
Power LED
ADC
GDC
Power Selector
HyperBus
HyperFlash/512Mb
Touch Panel
TFT Panel
(Panel Included)
MFT
EBI
Reset LED
GPIO
SD-Card I/F
SDHC
JTAG
JTAG
Trace
Trace
Debug
OB JTAG
Device
Switch
UART
Host
SDRAM/128Mb
RST
S6E2DH
Reset Button
MFS
I2S
I2C
Headphone
+microphone
Codec
GPIO
1 pushbutton
ADC
Photo transistor
MFS0
ADC
Accelerometer
USB
ADC
3D Magnetometer
VBAT
development environment / evaluation board
Development Tools
ARM (KEIL) / IAR SYSTEMS
Graphics Software Development environment
GDC Software Architecture
GDC
Architecture
Application
GDC Lib
Graphics MCU
– Software Example
(incl. GDC Library)
– User Manual
– Application Note
+
Starterkit
Note: This document may be revised by subsequent versions or modifications due to changes in technical specifications.
Spansion: 915 DeGuigne Drive, PO Box 3453, Sunnyvale, CA 94088-3453 USA
+1 (408) 962-2500 | 1 866 SPANSION | www.spansion.com
© 2015 Spansion®, the Spansion logo, MirrorBit®, HyperFlash™, HyperBus™ and combinations thereof, are trademarks and registered trademarks
of Spansion LLC in the United States and other countries. ARM and Cortex are registered trademarks of ARM Limited in the United States and
other countries. Other names used are for informational purposes only and may be trademarks of their respective owners.
www.facebook.com/spansion
twitter: @Spansion, @SpansionService, @SpansionAuto
www.youtube.com/spansioninc
www.linkedin.com/company/spansion