LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only LED SMD Pb Lead-Free Parts LG-170WK-DT-A05 DATA SHEET DOC. NO : QW0905-LG-170WK-DT-A05 REV. : A DATE : 15 - May. - 2015 發行 立碁電子 DCC LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 1/13 PART NO. LG-170WK-DT-A05 Features: 1. Package in 8.0mm carrier tape on 7" diameter reel. 2. Compatible with automatic placement equipment. 3. Compatible with reflow solder process. Descriptions: 1. The LG-170 SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. 2. Besides, lightweight makes them ideal for miniature applications. etc. Applications: 1. Automotive : backlighting in dashboard and switch. 2. Telecommunication : indicator and backlighting in telephone and fax. 3. Flat backlight for LCD, switch and symbol 4. General use. Device Selection Guide: PART NO MATERIAL LG-170WK-DT-A05 InGaN COLOR Emitted Lens White Yellow Diffused LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 2/13 PART NO. LG-170WK-DT-A05 Package Dimensions 0.8 Cathode Mark 0.3 1.25 Cathode Mark Resin 0.4 LED DIE 2.0 Soldering Terminal 1.4 Polarity 0.4 Note : 1.All dimension are in millimeter tolerance is ±0.1mm unless otherwise noted. 2.Specifications are subject to change without notice. Recommended Soldering Pad Dimensions 1.2 1.2 0.9 1.2 Note : The tolerances unless mentioned is ±0.1mm,Angle ±0.5. Unit=mm. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 3/13 PART NO. LG-170WK-DT-A05 Absolute Maximum Ratings at Ta=25℃ Symbol Ratings UNIT Forward Current IF 20 mA Peak Forward Current Duty 1/10@10KHz IFP 100 mA Power Dissipation PD 72 mW Reverse Current @5V Ir 50 μA Electrostatic Discharge ESD 500 V Operating Temperature Topr - 20 ~ + 80 ℃ Storage Temperature Tstg - 30 ~ + 100 ℃ Parameter Typical Electrical & Optical Characteristics (Ta=25℃) Items Luminous Intensity Symbol Min. Typ. Iv 80 200 ---- mcd IF=20mA X 0.1678 ---- 0.2262 ---- IF=20mA Y 0.1167 ---- 0.2036 ---- IF=20mA VF 2.8 ---- 3.6 V IF=20mA 2θ 1/2 ---- 140 ---- deg IF=20mA Max. UNIT CONDITION Chromaticity Coordinates Forward Voltage Viewing Angle Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2.The luminous intensity data did not including ±15% testing tolerance. 3.The color coordinates measurememt allowance is ±0.01 testing tolerance. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 4/13 PART NO. LG-170WK-DT-A05 Luminous Intensity Classification BIN CODE Iv(mcd) at20mA Min. Max. Q 80 125 R 125 200 S 200 320 T 320 500 BIN CODE 1 2 3 4 Vf(v) at 20mA Min. Max. 2.8 3.0 3.2 3.4 3.0 3.2 3.4 3.6 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 5/13 PART NO. LG-170WK-DT-A05 Chromaticity Coordinates Specifications For Bin Grading Color Coordiante at 20mA BIN CODE 1 3 2 4 X Y X Y X Y X Y ICB1 0.2198 0.2237 0.2366 0.2171 0.2262 0.197 0.2094 0.2036 ICB2 0.2094 0.2036 0.2262 0.197 0.2158 0.1769 0.1991 0.1836 ICB3 0.1991 0.1836 0.2158 0.1769 0.2054 0.1568 0.1887 0.1635 ICB4 0.1887 0.1635 0.2054 0.1568 0.1951 0.1368 0.1783 0.1434 ICB5 0.1783 0.1434 0.1951 0.1368 0.1847 0.1167 0.1678 0.1233 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 6/13 PART NO. LG-170WK-DT-A05 CIE Chromaticity Diagram 0.23 0.22 ICB1 0.21 0.2 0.19 ICB2 0.18 0.17 ICB3 0.16 0.15 ICB4 0.14 0.13 ICB5 0.12 0.11 0.15 0.16 0.17 0.18 0.19 0.2 0.21 0.22 0.23 0.24 0.25 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 7/13 PART NO. LG-170WK-DT-A05 Typical Electro-Optical Characteristics Curve WK CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 3.0 Relative Intensity Normalize @20mA Forward Current(mA) 1000 100 10 1.0 0.1 2.5 2.0 1.5 1.0 0.5 0.0 1.0 3.0 2.0 4.0 5.0 1 10 100 1000 Forward Current(mA) Forward Voltage(V) Fig.3 Forward Current vs. Temperature Fig.4 Relative Intensity vs. Temperature Relative Intensity@20mA Normalize @25℃ Forward Current(mA) 40 30 20 10 0 0 20 40 60 80 100 3.0 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 Ambient Temperature (Ta°C) Ambient Temperature( ℃) Fig.6 Directive Radiation Fig.5 Luminous Spectrum(Ta=25 ℃) SPECTRAL RADIANCE 100 Intensity 80 60 40 20 0 400 500 600 Wavelength (nm) 700 800 100 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 8/13 PART NO. LG-170WK-DT-A05 Carrier Type Dimensions 2.0 1.5 4.0±0.2 0.25 1.75 3.5±0.2 8.0 ±0.3 5.3 2.22 Polarity 0.87 4.0±0.2 1.36 Note : The tolerances unless mentioned is ± 0.1mm,Angle ± 0.5. Unit=mm. ‧ Packing Specifications Label Aluminum Moist-Proof bag Label Part No. Description Quantity/Reel LG-170WK-DT-A05 8.0mm tape,7"reel 4000 devices LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 9/13 PART NO. LG-170WK-DT-A05 Label Explanation LIGITEK ELECTRONICS CO., LTD. Pb PART : LG-170WK-DT-A05 BIN : Luminous Intensity LOT : GS11550168 HUE : Dominant Wavelength QTY(PCS): 4000 VF : Forward Voltage BIN/HUE : T/ICB2 VF:2.8-3.0 Reel Dimensions 0.2 0.4 0.8 0.8 0.6 0.2 0.4 0.6 2.0 ±0.5 178 ±1.5 6.0 ±1.0 9.0±1.0 ψ13.5±1.0 12.0±1.0 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 10/13 PART NO. LG-170WK-DT-A05 Box Explanation 1. 5 BAG / INNER BOX 2. INNER BOX SIZE : L X W X H 23cm X 8.5cm x 26cm H W L 3. 10 INNER BOXES / CARTON 4. CARTON SIZE : L X W X H 58cm X 34cm x 35cm L W H LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 11/13 PART NO. LG-170WK-DT-A05 Recommended Soldering Conditions 1. Hand Solder Basic spec is ≦ 280 ℃ 3 sec one time only. 2 PB-Free Reflow Solder 1~5°C/sec 1~5°C/sec Preheat 180~200°C 260°C MaX. 10sec.Max 6°C/sec Above 220°C 60 sec.Max. 120 sec.Max. Note: 1.Reflow soldering should not be done more than two times. 2.When soldering,do not put stress on the LEDs during heating. 3.After soldering,do not warp the circuit board. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 12/13 PART NO. LG-170WK-DT-A05 Precautions For Use: Storage time: 1.The operation of Temperatures and RH are : 5 ℃~35 ℃,RH60%. 2.Once the package is opened, the products should be used within a week. Otherwise, they should be kept in a damp proof box with descanting agent. Considering the tape life, we suggest our customers to use our products within a year(from production date). 3.If opened more than one week in an atmosphere 5 ℃ ~ 35℃,RH60%, they should be treated at 60 ℃ ± 5 ℃fo r 15hrs. Drive Method: LED is a current operated device, and therefore, requirer some kind of current limiting incorporated into the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series with the LED. Consider worst case voltage variations than could occur across the current limiting resistor. The forwrd current should not be allowed to change by more than 40% of its desired value. Circuit model A Circuit model B LED LED (A) Recommended circuit. (B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED. Cleaning: Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED. ESD(Electrostatic Discharge): Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 13/13 PART NO. LG-170WK-DT-A05 Reliability Test: Classification Test Item Test Condition Reference Standard Operating Life Test 1.Ta=Under Room Temperature As Per Data Sheet Maximum Rating. 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) MIL-STD-750D: 1026 MIL-STD-883D: 1005 JIS C 7021: B-1 High Temperature Storage Test 1.Ta=105 ℃± 5 ℃ 2.t=1000 hrs (-24hrs, +72hrs) MIL-STD-883D:1008 JIS C 7021: B-10 Low Temperature Storage Test 1.Ta=-40 ℃± 5 ℃ 2.t=1000 hrs (-24hrs, +72hrs) JIS C 7021: B-12 High Temperature High Humidity Storage Test 1.Ta=65 ℃± 5 ℃ 2.RH=90%~95% 3.t=1000hrs ¡Ó2hrs Endurance Test Thermal Shock Test Solderability Test Environmental Test Temperature Cycling IR Reflow 1.Ta=105 ℃±5℃ &-40℃± 5 ℃ (10min) (10min) 2.total 10 cycles 1.T.Sol=235 ℃±5 ℃ 2.Immersion time 2 ± 0.5sec 3.Coverage ≧ 95% of the dipped surface 1.105 ℃ ~ 25 ℃ ~ -55 ℃ 30mins 5mins 30mins 2.10 Cyeles 1.T=260°C Max. 10sec.Max. 2. 6 Min MIL-STD-202F:103B JIS C 7021: B-11 MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1011 MIL-STD-202F: 208D MIL-STD-750D: 2026 MIL-STD-883D: 2003 IEC 68 Part 2-20 JIS C 7021: A-2 MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1010 JIS C 7021: A-4 MIL-STD-750D:2031.2 J-STD-020