LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only LED SMD Pb LG-150PT-CT DATA SHEET DOC. NO : QW0905-LG-150PT-CT REV. : B DATE : 20-Feb-2009 發行 立碁電子 DCC LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 1/10 PART NO. LG-150PT-CT Features: 1. Fast response time. 2. High photo sensitivity. 3. Small junction capacitance. Descriptions: 1. The LG-150PT is a phototransistor in miniature SMD package which is molded in water clear plastic with flat top view lens. the device is spectrally matched to emitting diode. Applications: 1. Miniature switch 2. Counters and sorter 3. Position sensor 4. Infrared applied system. Device Selection Guide: PART NO MATERIAL Lens Color LG-150PT-CT Silicon Water Clear LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 2/10 PART NO. LG-150PT-CT Package Dimensions 1.1 0.5 1.6 Resin 2 2 0.6 LED DICE 3.2 Soldering Terminal 2.0 1 1 0.6 PCB 1.Emitter 2.Collector Note : 1.All dimension are in millimeter tolerance is ±0.1mm unless otherwise noted. 2.Specifications are subject to change without notice. Recommended Soldering Pad Dimensions 1.6 1.6 2.0 1.6 Note : The tolerances unless mentioned is ±0.1mm,Angle±0.5. Unit=mm. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 3/10 PART NO. LG-150PT-CT Absolute Maximum Ratings at Ta=25 ℃ Symbol Ratings UNIT Collector-Emitter Voltage VCEO 30 V Emitter-Collector Voltage VEcO 5 V Collector Current IC 20 mA Power Dissipation at(or below 25± Free Air Temperature Pc 75 mW Operating Temperature Topr -25 ~ +85 ℃ Storage Temperature Tstg -40 ~ +85 ℃ Soldering Temperature Tsol Parameter Max 260 ℃ for 5 sec Max Typical Electrical & Optical Characteristics (Ta=25 ℃) Symbol Min. Typ. V(BR)CEO 30 ---- ---- V V(BR)ECO 5.0 ---- ---- V VCE(sat) ---- ---- 0.4 V Rise Time Tr ---- 5.0 ---- μs Fall Time Tf ---- 5.0 ---- μs ICEO ---- ---- 100 nA VCE =10V Ee=0mw/c㎡ 0.25 ---- 0.5 0.5 ---- 0.9 mA VCE =5V Ee=1mw/c㎡ λP=940nm Items Collector-Emitter Breakdown Voltage Emitter-Collector Breakdown Voltage Collector-Emitter Saturation Voltage Collector Dark Current On State Collector Current Ip(on) Max. UNIT 0.9 ---- 1.3 1.3 ---- 1.5 CONDITION Ic=1mA Ee=0mw/c㎡ IE=100μA Ee=0mw/c㎡ Ic=0.5mA Ee ㎡ VCE =30V IC=800 μA RL=1KΩ LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 4/10 PART NO. LG-150PT-CT Typical Electro-Optical Characteristics Curve PT CHIP 100 1.0 80 60 40 20 0 -25 25 0 50 75 100 Fig.3 Collector Current vs. Irradiance 100 VCE =5V Ta 25 ℃ 10 1.0 0.1 0.01 0.5 1.0 3.0 Irradiance Ee (mW/c ㎡) 0.8 0.6 0.4 0.2 0 700 800 900 1000 1100 Wavelength λP (nm) Ambient Temperature( ℃) Collector Current Ic(mA) Fig.2 Spectral Sensitivity Relative Spectral Sensitivity Collector Power Dissipation Pd(mW) Fig.1 Collector Power Dissipation vs. Ambient Temperature 5.0 1200 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LG-150PT-CT Page 5/10 Carrier Type Dimensions 4.0±0.2 Collector 2.0 0.23 1.5 1.75 3.5±0.2 8.0±0.3 5.3 3.38 Emitter 4.0±0.2 1.36 1.76 Note : The tolerances unless mentioned is ±0.1mm,Angle ± 0.5. Unit=mm. • Packing Specifications Label Aluminum Moist-Proof bag Label Part No. Description Quantity/Reel LG-150PT-CT 8.0mm tape,7"reel 3000 devices Page 6/10 PART NO. LG-150PT-CT Label Explanation 立碁電子工業股份有限公司 LIGITEK LED LIGITEK ELECTRONICS CO., LTD. PART NO. : LG-150PT-CT I4 : On State Collector Current LOT NO. : GS1-920016 Q'TY(PCS) : 3000 PCS BIN/HUE : I4 Reel Dimensions 0.2 0.4 0.8 0.8 0.6 0.2 0.4 0.6 2.0± 0.5 178±1.5 6.0±1.0 9.0±1.0 ψ13.5±1.0 12.0±1.0 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 7/10 PART NO. LG-150PT-CT Box Explanation 1. 5 BAG / INNER BOX 2. INNER BOX SIZE : L X W X H 23cm X 8.5cm x 26cm H W L 3. 10 INNER BOXES / CARTON 4. CARTON SIZE : L X W X H 49cm X 46cm x 29cm L W H LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LG-150PT-CT Page 8/10 Recommended Soldering Conditions 1. Hand Solder Basic spec is ≦ 280℃ 3 sec one time only. 2. Wave Solder Soldering heat Max. 260 ℃ 245±5℃ within 5 sec Preheat 120 ~ 150℃ 120 ~ 180 sec 3-1. LEAD Reflow Solder Temp. (℃) 240 Rising +5 ℃/sec Cooling -5℃/sec Preheat 150 120 60 ~ 120 sec Time 5sec 3-2 PB-Free Reflow Solder 1~5° C/sec Preheat 180~200 ° C 1~5° C/sec 260° C MaX. 10sec.Max Above 220 ° C 60 sec.Max. 120 sec.Max. Reflow Soldering should not be done more than two times. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LG-150PT-CT Page 9/10 Precautions For Use: Storage time: 1.The operation of Temperatures and RH are : 5 ℃~35℃,RH60%. 2.Once the package is opened, the products should be used within a week. Otherwise, they should be kept in a damp proof box with descanting agent. Considering the tape life, we suggest our customers to use our products within a year(from production date). 3.If opened more than one week in an atmosphere 5 ℃ ~ 35℃,RH60%, they should be treated at 60 ℃± 5 ℃fo r 15hrs. Drive Method: LED is a current operated device, and therefore, requirer some kind of current limiting incorporated into the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series with the LED. Consider worst case voltage variations than could occur across the current limiting resistor. The forwrd current should not be allowed to change by more than 40 % of its desired value. Circuit model A Circuit model B LED LED (A) Recommended circuit. (B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED. Cleaning: Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED. ESD(Electrostatic Discharge): Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 10/10 PART NO. LG-150PT-CT Reliability Test: Classification Test Item Test Condition Reference Standard Operating Life Test 1.Ta=Under Room Temperature As Per Data Sheet Maximum Rating. 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) MIL-STD-750D: 1026 MIL-STD-883D: 1005 JIS C 7021: B-1 High Temperature Storage Test 1.Ta=105 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) MIL-STD-883D:1008 JIS C 7021: B-10 Low Temperature Storage Test 1.Ta=-40 ℃±5 ℃ 2.t=1000 hrs (-24hrs, +72hrs) JIS C 7021: B-12 High Temperature High Humidity Storage Test 1.Ta=65 ℃±5℃ 2.RH=90 %~95% 3.t=1000hrs ±2hrs Endurance Test Thermal Shock Test Solderability Test Environmental Test Temperature Cycling IR Reflow 1.Ta=105 ℃±5℃&-40 ℃±5℃ (10min) (10min) 2.total 10 cycles 1.T.Sol=235 ℃±5 ℃ 2.Immersion time 2 ±0.5sec 3.Coverage ≧95% of the dipped surface 1.105 ℃ ~ 25 ℃ ~ -55 ℃ ~ 25 ℃ 30mins 5mins 30mins 5mins 2.10 Cyeles 1.T=260 ° C Max. 10sec.Max. 2. 6 Min MIL-STD-202F:103B JIS C 7021: B-11 MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1011 MIL-STD-202F: 208D MIL-STD-750D: 2026 MIL-STD-883D: 2003 IEC 68 Part 2-20 JIS C 7021: A-2 MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1010 JIS C 7021: A-4 MIL-STD-750D:2031.2 J-STD-020