Datasheet

UNISONIC TECHNOLOGIES CO., LTD
GS1010FL
DIODE
SURFACE MOUNT
RECTIFIER

GENERAL
DESCRIPTION
The UTC GS1010FL is a surface mount general rectifier, it uses
UTC’s advanced technology to provide the customers with low profile
package and low leakage current, etc.
The UTC GS1010FL is suitable for ESD protection and surface
mounted applications, etc.

SOD-123F
FEATURES
* Low profile package
* ESD protection
* Low leakage current


SYMBOL
ORDERING INFORMATION
Ordering Number
GS1010FLG-CA2F-R
Note: Pin Assignment: A: Anode
K: Cathode

Package
SOD-123F
Pin Assignment
1
2
K
A
Packing
Tape Reel
MARKING
www.unisonic.com.tw
Copyright © 2014 Unisonic Technologies Co., Ltd
1 of 3
QW-R601-209.C
GS1010FL

DIODE
ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified)
PARAMETER
SYMBOL
RATINGS
UNIT
Repetitive Peak Reverse Voltage
VRRM
1000
V
Maximum RMS Voltage
VRMS
700
V
Maximum DC Blocking Voltage
VDC
1000
V
Rectified Current (Average) Half Wave Rectification with
IO
1.0
A
Resist. Load at TA=25°C (Note 1)
Surge Forward Current at t<1s, TJ=25°C
IFSM
30
A
Junction Temperature
TJ
-55~+150
°C
Storage Temperature
TSTG
-55~+150
°C
Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. Measured at 1MHz and applied reverse voltage of 0V D.C.

THERMAL DATA
PARAMETER
SYMBOL
θJA
Junction to Ambient

RATINGS
200
UNIT
°C/W
ELECTRICAL CHARACTERISTICS (TA=25°C, unless otherwise specified)
PARAMETER
Forward Voltage
Leakage Current
SYMBOL
VF
IR
TEST CONDITIONS
IF=1.0A
VR=1000V, TJ=25°C
VR=1000V, TJ=100°C
Junction Capacitance (Note)
CJ
Note: Measured at 1MHz and applied reverse voltage of 4.0V D.C.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN
TYP MAX UNIT
1.1
V
10
μA
50
μA
4.0
pF
2 of 3
QW-R601-209.C
GS1010FL

DIODE
TYPICAL CHARACTERISTICS
Typical Forward Characteristics
Forward Current Derating Curve
1.5
100
1.25
40
20
1.0
10
4.0
0.75
2.0
0.5
1.0
0.25
0.4
0.2
0
0
25
50
75
125 150
100
0.1
0.4 0.6
0.8
1.0
1.2 1.4
1.6 1.8
Instantaneous Forward Voltage, VF (V)
Case Temperature, TC (°C)
Typical Reverse Characteristics
Typical Junction Capacitance
100
100
TJ=25°C
50
10
20
TJ=125°C
1.0
10
TJ=75°C
5
0.1
TJ=25°C
2
0.01
0
0
20
40
60
80
100
Percent of Peak Reverse Voltage (%)
1
0.1
1.0
10
100
1000
Reverse Bias Voltage, VR (V)
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 3
QW-R601-209.C
Similar pages