SL02, SL03, SL04 www.vishay.com Vishay Semiconductors Schottky Rectifier Surface Mount FEATURES • For surface mounted applications • Ideal for automated placement • Low power loss, high efficiency • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • Meets JESD 201 class 2 whisker test • Wave and reflow solderable • AEC-Q101 qualified 17249 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 MECHANICAL DATA Case: DO-219AB (SMF) Polarity: color band denotes cathode end Weight: approx. 15 mg Packaging codes / options: GS18/10K per 13" reel (8 mm tape), 50K/box GS08/3K per 7" reel (8 mm tape), 30K/box Int. construction: single PARTS TABLE PART ORDERING CODE MARKING REMARKS SL02 SL02-GS18 or SL02-GS08 S2 Tape and reel SL03 SL03-GS18 or SL03-GS08 S3 Tape and reel SL04 SL04-GS18 or SL04-GS08 S4 Tape and reel ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current PART SYMBOL VALUE UNIT SL02 VRRM 20 V SL03 VRRM 30 V SL04 VRRM 40 V SL02 VRMS 14 V SL03 VRMS 21 V SL04 VRMS 28 V SL02 VDC 20 V SL03 VDC 30 V SL04 VDC 40 V IF(AV) 1.1 A IFSM 40 A Ttp = 109 °C Peak forward surge current 8.3 ms single half sine-wave THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION Thermal resistance junction to ambient air (1) Maximum operating junction temperature Storage temperature range SYMBOL VALUE UNIT RthJA 180 K/W Tj 125 °C Tstg -55 to 150 °C Note (1) Mounted on epoxy substrate with 3 mm x 3 mm Cu pads (≥ 40 μm thick) Rev. 2.0, 05-Sep-14 Document Number: 85687 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SL02, SL03, SL04 www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION PART SL02 IF = 0.5 A (1) SL03 SL04 SL02 Instaneous forward voltage TYP. MAX. VF 0.360 0.385 V VF 0.395 0.43 V VF 0.450 0.51 VF 0.420 V SL03 VF 0.450 V SL04 VF 0.530 TA = 25 °C SL02 IR TA = 100 °C SL02 TA = 25 °C SL03 TA = 100 °C SL03 Typical instantaneous forward voltage IF = 1.1 A Maximum DC reverse current at rated DC blocking voltage SYMBOL MIN. UNIT V V 250 μA IR 8 mA IR 130 μA IR 6 mA TA = 25 °C SL04 IR 20 μA TA = 100 °C SL04 IR 6 mA Reverse recovery time SL02 trr < 10 ns SL03 trr < 10 ns SL04 trr < 10 ns Note (1) Pulse test: 300 μs pulse width, 1 % duty cycle TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 10 Instantaneous Forward Current (A) Average Forward Current (A) 1.5 1.0 0.5 0 0 10 30 17379 50 70 90 Tj = 50 °C 0.01 Tj = 25 °C 0.001 Pulse width = 300 µs 1 % duty cycle 0 17381 Lead Temperature (°C) 0.8 0.2 1.0 0.4 0.6 Instantaneous Forward Voltage (V) Fig. 3 - Typical Instantaneous Forward Characterisics - SL02 250 10 000 Instantaneous Reverse Current (µA) Junction Capacitance (pF) Tj = 75 °C 0.1 0.0001 110 130 150 Fig. 1 - Forward Current Derating Curve 200 150 100 SL02 50 SL04 Tj = 100 °C Tj = 50 °C 100 Tj = 25 °C 10 1 0 2 8 6 4 Reverse Voltage (V) 10 12 Fig. 2 - Typical Junction Capacitance Tj = 75 °C 1000 10 17380 Tj = 100 °C 1 17382 0 5 15 20 10 Reverse Voltage (V) 25 Fig. 4 - Typical Reverse Current Characteristics - SL02 Rev. 2.0, 05-Sep-14 Document Number: 85687 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SL02, SL03, SL04 www.vishay.com Vishay Semiconductors 10 000 Instantaneous Reverse Current (µA) Instantaneous Forward Current (A) 10 Tj = 100 °C 1 Tj = 75 °C 0.1 Tj = 50 °C 0.01 Tj = 25 °C 0.001 Pulse width = 300 µs 1 % duty cycle 0.0001 0 17383 Tj = 100 °C 1000 Tj = 75 °C 100 Tj = 50 °C 10 Tj = 25 °C 1 0.1 0.8 0.6 1.0 0.4 0.2 Instantaneous Forward Voltage (V) 0 10 15 20 25 Reverse Voltage (V) 5 17384 Fig. 5 - Typical Instantaneous Forward Characteristics - SL03 30 35 Fig. 6 - Typical Reverse Current Characteristics - SL03 PACKAGE DIMENSIONS in millimeters (inches): DO-219AB (SMF) 0.85 (0.033) 0 (0.000) 0.1 (0.004) 5 5 0.05 (0.002) 1.7 (0.067) Detail Z enlarged 1.2 (0.047) 0.8 (0.031) 0.25 (0.010) 1.9 (0.075) 0.35 (0.014) 1.08 (0.043) 2.9 (0.114) 0.88 (0.035) 2.7 (0.106) 3.9 (0.154) 3.5 (0.138) Foot print recommendation: Created - Date: 15. February 2005 Rev. 3 - Date: 13. March 2007 Document no.:S8-V-3915.01-001 (4) 1.3 (0.051) 1.4 (0.055) 1.3 (0.051) 2.9 (0.114) 17247 Rev. 2.0, 05-Sep-14 Document Number: 85687 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SL02, SL03, SL04 www.vishay.com Vishay Semiconductors BLISTERTAPE DIMENSIONS in millimeters: DO-219 AB (SMF) PS Document-No.: S8-V-3717.02-001 (3) 18513 Rev. 2.0, 05-Sep-14 Document Number: 85687 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000