UNISONIC TECHNOLOGIES CO., LTD MUR460 DIODE HIGH EFFICIENCY GLASS PASSIVATED RECTIFIER 1 DESCRIPTION The UTC MUR460 is a high efficiency glass passivated rectifier, it uses UTC’s advanced technology to provide customers with low power loss, high efficiency, low forward voltage drop, high current surge, high speed switching and low reverse leakage, etc. 2 FEATURES DO-201AD * Low power loss, high efficiency * High speed switching * Low forward voltage drop * Low reverse leakage * High current capability * High reliability * High current surge ORDERING INFORMATION Ordering Number Lead Free Halogen Free MUR460L-Z21D-R MUR460G-Z21D-R Note: Pin Assignment: A: Anode K: Cathode Package DO-201AD Pin Assignment 1 2 K A Packing Tape Box MARKING Cathode Band for uni-directional Only MUR460 L: Lead Free G: Halogen Free Date Code www.unisonic.com.tw Copyright © 2016 Unisonic Technologies Co., Ltd 1 of 3 QW-R601-220.D MUR460 DIODE ABSOLUTE MAXIMUM RATINGS Ratings at 25°C ambient temperature unless otherwise specified. Single phase half-wave 60Hz, resistive or inductive load, for capacitive load current derate by 20%. PARAMETER SYMBOL RATINGS UNIT Repetitive Peak Reverse Voltage VRRM 600 V RMS Voltage VRMS 420 V DC Blocking Voltage VDC 600 V Average Forward Rectified Current at TA=55°C I(AV) 4.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC IFSM 125 A Method) Junction Temperature TJ -65 ~ +150 °C Storage Temperature TSTG -65 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER Junction to Ambient (Note 2) SYMBOL θJA RATINGS 50 UNIT °C/W ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Single phase half-wave 60Hz, resistive or inductive load, for capacitive load current derate by 20%. PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT Forward Voltage VF IF=4.0A, TJ=25°C 1.28 V DC Reverse Current at Rated DC Blocking IR TJ=25°C 10.0 μA Voltage Reverse Recovery Time (Note 1) trr 50 ns Notes: 1. Reverse recovery condition IF=0.5A, IR=1.0A, Irr=0.25A 2. Forward recovery condition IF=1.0 A, di/dt=100 A/s, Recovery to 1.0 V. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 3 QW-R601-220.D MUR460 DIODE TYPICAL CHARACTERISTICS Peak Forward Surge Current Forward Derating Curve 150 Peak Forward Surge Current, IFSM (A) Average Forward Rectified, IAV (A) 4 3 2 1 0 Single Phase, Half Wave 60Hz Resistive or Inductive Load 0 25 50 75 100 125 150 Ambient Temperature, TA (V) 100 50V~200V 50 400V~1000V 0 1 10 100 Number Of Cycles at 60Hz (Cycles) Instantaneous Forward Current, IF (A) Forward Current Characteristics 100 400V~600V 10 50V~200V 1 800V~1000V 0.1 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Instantaneous Forward Voltage, VF (V) UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R601-220.D