Datasheet

XC5
DIN Four-row, 128-contact Connectors
Multi-contact (4-row, 128-contact)
Connectors Expanding the DIN Concept
■ Fully preserve the characteristics of normal DIN
connectors while increasing the number of contacts available.
■ Right-angle plug terminals of the standard DIN
type and those vertically mounted on PCBs are
available.
■ Twin-contact sockets are used for high reliability
and low insertion force.
RoHS Compliant
■ Ratings and Characteristics
■ Materials and Finish
Rated current
2A
Type
Plugs
Rated voltage
300 VAC
Housings
Contact resistance
30 mΩ max. (at 20 mV, 100 mA max.)
Fiber-glass reinforced PBT resin (UL94 V0)/gray
Contacts Mating
end
Brass/nickel base,
0.4-μm gold plating
(See note.)
Phosphor bronze/
nickel base, 0.4-μm
gold plating (See
note.)
Brass/nickel base,
2.0-μm tin plating
Phosphor bronze/
nickel base, 2.0-μm
tin plating
Insulation resistance 106 MΩ min. (at 100 VDC)
Dielectric strength
1,000 VAC for 1 min (leakage current:
1 mA max.)
Total insertion force
0.59 N max. per contact
Removal force
0.15 N min. (with test gauge, t = 0.56 mm)
Insertion durability
200 times
Ambient operating
temperature
−55 to 125°C (with no icing at low
temperature)
Terminal
Note:
Sockets
For non-standard plating, contact your OMRON representative.
1
XC5M Four-row Plugs
■ Dimensions
(unit: mm)
XC5M-0222
(Standard DIN, with rightangle DIP terminals)
XC5M-0222-1
(DIN style 1, with
right-angle DIP
terminals)
Two, 2.8 dia.
Standard DIN
DIN style-1
Mounting holes (bottom view)
Two, 2.8 dia. 128, 0.8 +0.1
dia.
0
Two, 2.8 dia. 128, 0.8 +0.1
dia.
0
5.3 ±0.1
(Board edge)
12.6 ±0.1
(Board edge)
Standard DIN
DIN style-1
■ Ordering Information
No. of
contacts
128
Housing
Standard DIN
DIN style 1
2
Model
XC5M-0222
XC5M-0222-1
DIN 4-row, 128-contact Connectors XC5
XC5N Four-row Sockets
■ Dimensions
(unit: mm)
XC5N-0221
(With straight DIP terminals)
Mounting holes (bottom view)
Two, 2.8 dia. 128, 0.8 +0.1
dia.
0
■ Ordering Information
No. of
contacts
128
Terminal type
Model
Straight DIP terminals
XC5N-0221
DIN 4-row, 128-contact Connectors
XC5
3
■ Mating Diagrams
(unit: mm)
Vertical (Standard)
Standard DIN Connectors
DIN style-1 Connectors
Plug
XC5M-0222-1
Plug
XC5M-0222
Socket
XC5N-0221
Socket
XC5N-0221
■ Precautions
Correct Use
Soldering
Mounting Position on PCB
Automated Soldering
When mounting right-angle terminals (DIN Style-1 Connectors) on a
PCB, select a position where the PCB is not under the body of the
Connector.
Before using automated soldering on a Connector that has rightangle terminals, mask the Connector (refer to the diagram).
Masking tape
(Sumitomo 3M #214 is recommended)
Automated Soldering Conditions (Jet Flow)
1. Soldering temperature: 250±5°C
2. Continuous soldering time: Within 5±1 s
• Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product.
• Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad
systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious
influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or
equipment, and be sure to provide the system or equipment with double safety mechanisms.
Note: Do not use this document to operate the Unit.
OMRON Corporation
Electronic and Mechanical Components Company
4
DIN 4-row, 128-contact Connectors XC5
Contact: www.omron.com/ecb
Cat. No. G052-E1-02
1014(0412)(O)
Similar pages