Crystal oscillator Epson Toyocom Product Number (please contact us) Q3321CExxxxxx00 CRYSTAL OSCILLATOR PROGRAMMABLE SG - 8002CE series •Frequency range : 1 MHz to 125 MHz •Supply voltage : 3.3 V / 5.0 V •Function : Output enable(OE) or Standby( ST ) •External dimensions : 3.2 × 2.5 × 1.05 mm •Short mass production lead time by PLL technology. •SG-Writer available to purchase. Please contact Epson Toyocom or local sales representative. Actual size Specifications (characteristics) Item Specifications *2 PT / ST PH / SH 1 MHz to 125 MHz 4.5 V to 5.5 V Symbol f0 Output frequency range Supply voltage VCC Storage temperature Operating temperature Temperature range -40 °C to +125 °C T_stg T_use Frequency tolerance f_tol Current consumption Disable current Standby current ICC I_dis I_std Symmetry *1 SYM High output voltage Low output voltage Output load condition (TTL) *1 Output load condition (CMOS) *1 Output enable / disable input voltage VOH VOL L_TTL Store as bare product after unpacking -20 °C to +70 °C (-40 °C to +85 °C) -40 °C to +85 °C B: ±50 × 10-6 ,C: ±100 × 10-6 M: ±100 × 10-6 40 mA Max. 28 mA Max. 30 mA Max. 16 mA Max. 50 μA Max. 40 % to 60 % 40 % to 60 % VCC-0.4 V Min. 0.4 V Max. 5 TTL Max. - L_CMOS 15 pF Max. VIH VIL 2.0 V Min. 0.8 V Max. 70 % VCC Min. 20 % VCC Max. 3 ns Max. - 4 ns Max. Remarks PC / SC VCC=4.5 V to 5.5 V 1 MHz to125 MHz VCC=3.0 V to 3.6 V 1 MHz to 66.7 MHz VCC=2.7 V to 3.6 V 2.7 V to 3.6 V Refer to “Outline specifications” (Frequency range) -20 °C to +70 °C -40 °C to +85 °C *3 No load condition, Max. frequency OE=GND ST =GND(ST,SH,SC) CMOS load:50 % VCC level, Max. load condition TTL load: 1.4 V, Max. load condition IOH=-16 mA(PT,ST,PH,SH),-8 mA(PC,SC) IOL=16 mA(PT,ST,PH,SH), 8 mA(PC,SC) Max. frequency and Max. Supply voltage ST terminal or OE terminal CMOS load: 20 % VCC to 80 % VCC level Rise and Fall time *1 tr/ tf TTL load: 0.4 V to 2.4 V level Start-up time t_str 10 ms Max. Time at minimum supply voltage to be 0 s +25 °C, VCC=5.0 V/ 3.3 V (PC,SC) First year ±5 × 10-6 / year Max. Frequency aging f_aging *1 Operating temperature (-40 °C to +85 °C), the available frequency, symmetry and output load conditions, please refer to “Outline specifications” page. External dimensions (Unit:mm) 3.2 ±0.2 #4 #3 C (ex.0.01 µF) 0.9 #1 Pin map Pin Connection 1 OE or ST 2 GND 3 OUT 4 VCC Note. OE Pin (PT, PH, PC) OE pin = "H" or "open" : Specified frequency output. OE pin = "L" : Output is high impedance. #4 #3 #1 #2 1.2 #2 #2 1.4 1.9 SC181A #1 2.2 #3 E125.0C Footprint (Recommended) (Unit:mm) 0.7 0.9 #4 2.5 ±0.2 . PLL-PLL connection & Jitter specification, please refer to “Jitter specifications and characteristics chart” page. PT / ST and PH / SH for “M” tolerance will be available up to 27 MHz. Checking possible by the Frequency checking program. 1.05 ±0.15 *2 *3 2.4 Resist ST pin (ST, SH, SC) ST pin - "H" or "open" : Specified frequency output. ST pin - "L" : Output is low level (weak pull - down), oscillation stops. To maintain stable operation, provide a 0.01uF to 0.1uF by-pass capacitor at a location as near as possible to the power source terminal of the crystal product (between Vcc - GND). http://www.epsontoyocom.co.jp “QMEMS” EPSON TOYOCOM In order to meet customer needs in a rapidly advancing digital, broadband and ubiquitous society, we are committed to offering products that are one step ahead of the market and a rank above the rest in quality. To achieve our goals, we follow a “3D (three device) strategy” designed to drive both horizontal and vertical growth. We will to grow our three device categories of “Timing Devices”, ”Sensing Devices” and “Optical Devices”, and expand vertical growth through a combination of products from these categories. A Quartz MEMS is any high added value quartz device that exploits the characteristics of quartz crystal material but that is produced using MEMS (micro-electro-mechanical system) processing technology. Market needs are advancing faster than previously imagined toward smaller, more stable crystal products, but we will stay ahead of the curve by rolling out products that exceed market speed and quality requirements. We want to further accelerate the 3D strategy by QMEMS. Quartz devices have become crucial in the network environment where products are increasingly intended for broadband, ubiquitous applications and where various types of terminals can transfer information almost immediately via LAN and WAN on a global scale. Epson Toyocom Corporation addresses every single aspect within a network environment. The new corporation offers “Digital Convergence” solutions to problems arising with products for consumer use, such as, core network systems and automotive systems. QMEMS and its logos are registered trademarks or trademarks of Epson Toyocom Corporation in Japan and other countries. PROMOTION OF ENVIRONMENTAL MANAGEMENT SYSTEM CONFORMING TO INTERNATIONAL STANDARDS At Epson Toyocom, all environmental initiatives operate under the Plan-Do-Check-Action(PDCA) cycle designed to achieve continuous improvements. The environmental management system (EMS) operates under the ISO 14001 environmental management standard. All of our major manufacturing and non-manufacturing sites,in Japan and overseas, completed the acquisition of ISO 14001 certification. ISO 14000 is an international standard for environmental management that was established by the International Standards Organization in 1996 against the background of growing concern regarding global warming, destruction of the ozone layer, and global deforestation. WORKING FOR HIGH QUALITY In order provide high quality and reliable products and services than meet customer needs, Epson Toyocom made early efforts towards obtaining ISO9000 series certification and has acquired ISO9001 for all business establishments in Japan and abroad. We have also acquired ISO/TS 16949 certification that is requested strongly by major automotive manufacturers as standard. ISO/TS16949 is the international standard that added the sector-specific supplemental requirements for automotive industry based on ISO9001. ►Explanation of the mark that are using it for the catalog ►Pb free. ►Complies with EU RoHS directive. *About the products without the Pb-free mark. Contains Pb in products exempted by EU RoHS directive. (Contains Pb in sealing glass, high melting temperature type solder or other.) ►The products have been designed for high reliability applications such as Automotive. Notice • This material is subject to change without notice. • Any part of this material may not be reproduced or duplicated in any form or any means without the written permission of Epson Toyocom. • The information, applied circuitry, programming, usage, etc., written in this material is intended for reference only. Epson Toyocom does not assume any liability for the occurrence of infringing on any patent or copyright of a third party. This material does not authorize the licensing for any patent or intellectual copyrights. • Any product described in this material may contain technology or the subject relating to strategic products under the control of the Foreign Exchange and Foreign Trade Law of Japan and may require an export license from the Ministry of International Trade and Industry or other approval from another government agency. • You are requested not to use the products (and any technical information furnished, if any) for the development and/or manufacture of weapon of mass destruction or for other military purposes. You are also requested that you would not make the products available to any third party who may use the products for such prohibited purposes. • These products are intended for general use in electronic equipment. When using them in specific applications that require extremely high reliability, such as the applications stated below, you must obtain permission from Epson Toyocom in advance. / Space equipment (artificial satellites, rockets, etc.) / Transportation vehicles and related (automobiles, aircraft, trains, vessels, etc.) / Medical instruments to sustain life / Submarine transmitters / Power stations and related / Fire work equipment and security equipment / traffic control equipment / and others requiring equivalent reliability. • In this document, product codes and markings will remain as previously identified prior to the merger. Due to the on-going strategy of gradual unification of part numbers, please review product codes and markings. • All brands or product names mentioned herein are trademarks and/or registered trademarks of their respective companies.