Control Transformer Class 2 TCT3-03E07AE Description: Triad control transformers come with tamper resistant shrouds for safety and a steel bracket welded to the bottom of the transformer for ease of mounting. These transformers are design and have the safety agency recognition for application where a Class 2 transformer is necessary. Some of the applications would include, but not limited to HVAC, Control boards, Lighting, etc. Picture for illustration only!! Electrical Specifications (@25C): 1. Maximum Power: 2.5VA 2. Input: 120V, 50/60 Hz 3. Output: 12V @ 0.250Amps 4. Voltage Regulation: 15% TYP @ full load to no load 5. Temperature Rise: <40°C TYP 6. Hipot: 1500VAC – Input to Output, Input & Output to Core 7. Inherently Limited. No fusing required. 2.362 1.92±.031 Construction: 120 VAC Three flange bobbin construction with primaries and secondaries wound side by side for low capacitive coupling. Agency File: .169±.011 UL: File E65390, UL 5085-1 & 3 (1585), Class 2 Transformer cUL: File E65390, UL 5085-1 & 3 (1585) For Canadian Use (CSA 22.2, No.66.3-06) .189 x .165±.019 1.272±.031 Connections: Input: Quick Disconnect tabs, 0.25 x 0.25 x 0.032 Output: Quick Disconnect tabs, 0.187 x 0.25 x 0.020 1.673 Dimensions: in .787±.031 120V 2.126 MAX Schematic: 12V COM COM RoHS Compliance: As of manufacturing date February 2005, all standard products meet the requirements of 2011/65/EU, known as the RoHS initiative. As of April 7, 2008, UL standards 506 and 1585 will be migrated to UL 5085-2 and 5085-3, respectably. * Upon printing, this document is considered “uncontrolled”. Please contact Triad Magnetics’ website for the most current version. Web: www.TriadMagnetics.com Phone 951-277-0757 Fax 951-277-2757 460 Harley Knox Blvd. Perris, California 92571 Publish Date: December 4, 2013