link

Analog Power
AM30N10-70D
N-Channel 100-V (D-S) MOSFET
Key Features:
• Low rDS(on) trench technology
• Low thermal impedance
• Fast switching speed
VDS (V)
100
PRODUCT SUMMARY
rDS(on) (mΩ)
78 @ VGS = 10V
92 @ VGS = 4.5V
ID(A)
26
25
Typical Applications:
• PoE Power Sourcing Equipment
• PoE Powered Devices
• Telecom DC/DC converters
• White LED boost converters
ABSOLUTE MAXIMUM RATINGS (TA = 25°C UNLESS OTHERWISE NOTED)
Parameter
Symbol
Limit
VDS
Drain-Source Voltage
100
VGS
Gate-Source Voltage
±20
TC=25°C
ID
Continuous Drain Current
26
IDM
Pulsed Drain Current b
100
IS
Continuous Source Current (Diode Conduction)
30
T
=25°C
P
Power Dissipation
100
C
D
TJ, Tstg -55 to 175
Operating Junction and Storage Temperature Range
THERMAL RESISTANCE RATINGS
Parameter
Maximum Junction-to-Ambient
Maximum Junction-to-Case
a
Symbol Maximum
RθJA
40
RθJC
1.5
Units
V
A
A
W
°C
Units
°C/W
Notes
a.
Surface Mounted on 1” x 1” FR4 Board, drain pad using 2 oz copper, value dependent on PC board thermal
characteristics
b.
Pulse width limited by maximum junction temperature
© Preliminary
1
Publication Order Number:
DS_AM30N10-70D_1B
Analog Power
Parameter
AM30N10-70D
Symbol
Gate-Source Threshold Voltage
Gate-Body Leakage
VGS(th)
IGSS
Zero Gate Voltage Drain Current
IDSS
On-State Drain Current
ID(on)
Drain-Source On-Resistance
rDS(on)
Forward Transconductance
Diode Forward Voltage
gfs
VSD
Total Gate Charge
Gate-Source Charge
Gate-Drain Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall-Time
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
Qg
Qgs
Qgd
td(on)
tr
td(off)
tf
Ciss
Coss
Crss
Test Conditions
Static
VDS = VGS, ID = 250 uA
VDS = 0 V, VGS = 20 V
VDS = 80 V, VGS = 0 V
VDS = 80 V, VGS = 0 V, TJ = 55°C
VDS = 5 V, VGS = 10 V
VGS = 10 V, ID = 9.2 A
VGS = 4.5 V, ID = 6.1 A
VDS = 40 V, ID = 5.5 A
IS = 9 A, VGS = 0 V
Dynamic
VDS = 50 V, VGS = 4.5 V, ID = 9 A
VDD = 50 V, RL = 5.2 Ω , ID = 9.6 A,
VGEN = 10 V, RGEN = 6 Ω
VDS = 15 V, VGS = 0 V, f =1Mhz
Min
Typ
Max
1
±100
1
25
34
Unit
V
nA
uA
A
78
92
20
0.8
21
3.8
14.2
7.5
13.6
41
35
990
115
77
mΩ
S
V
nC
ns
pF
Notes
a. Pulse test: PW <= 300us duty cycle <= 2%.
b. Guaranteed by design, not subject to production testing.
Analog Power (APL) reserves the right to make changes without further notice to any products herein. APL makes no warranty,
representation or guarantee regarding the suitability of its products for any particular purpose, nor does APL assume any liability arising out
of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special,
consequential or incidental damages. “Typical” parameters which may be provided in APL data sheets and/or specifications can and do vary
in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. APL does not convey any license under its patent rights nor the rights of others. APL
products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the APL product could create a situation
where personal injury or death may occur. Should Buyer purchase or use APL products for any such unintended or unauthorized application,
Buyer shall indemnify and hold APL and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs,
damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated
with such unintended or unauthorized use, even if such claim alleges that APL was negligent regarding the design or manufacture of the part.
APL is an Equal Opportunity/Affirmative Action Employer.
© Preliminary
2
Publication Order Number:
DS_AM30N10-70D_1B
Analog Power
AM30N10-70D
Typical Electrical Characteristics
10
0.14
TJ = 25°C
0.12
8
ID - Drain Current (A)
RDS(on) - On-Resistance (Ω)
9
0.1
3.5V
0.08
4.0V
4.5V
0.06
6V,8V,10V
0.04
7
6
5
4
3
2
0.02
1
0
0
0
2
4
6
ID-Drain Current (A)
8
0
10
2
3
4
VGS - Gate-to-Source Voltage (V)
1. On-Resistance vs. Drain Current
2. Transfer Characteristics
100
0.2
TJ = 25°C
0.18
TJ = 25°C
ID = 9A
0.16
IS - Source Current (A)
RDS(on) - On-Resistance (Ω)
1
0.14
0.12
0.1
0.08
0.06
10
1
0.1
0.04
0.02
0.01
0
0
2
4
6
8
VGS - Gate-to-Source Voltage (V)
0
10
10V,8V,6V
9
0.8
1
1.2
1600
4.5V
4.0V
3.5V
F = 1MHz
1400
1200
7
6
0.6
4. Drain-to-Source Forward Voltage
Capacitance (pf)
ID - Drain Current (A)
8
0.4
VSD - Source-to-Drain Voltage (V)
3. On-Resistance vs. Gate-to-Source Voltage
10
0.2
3.0V
5
4
3
Ciss
1000
800
600
400
2
1
200
0
0
Coss
Crss
0
0.5
1
1.5
2
0
10
15
20
VDS-Drain-to-Source Voltage (V)
VDS - Drain-to-Source Voltage (V)
5. Output Characteristics
© Preliminary
5
6. Capacitance
3
Publication Order Number:
DS_AM30N10-70D_1B
Analog Power
AM30N10-70D
Typical Electrical Characteristics
2.5
VDS = 50V
9
ID = 9A
8
RDS(on) - On-Resistance (Ω)
(Normalized)
VGS-Gate-to-Source Voltage (V)
10
7
6
5
4
3
2
2
1.5
1
1
0
0.5
0
10
20
30
40
-50 -25
Qg - Total Gate Charge (nC)
25
50
75
100 125 150 175
TJ - Junction Temperature (°C)
7. Gate Charge
8. Normalized On-Resistance Vs
Junction Temperature
1000
PEAKTRANSIENT POWER (W)
200
10 uS
100
100 uS
1 mS
ID Current (A)
0
10 mS
10
100 mS
1 SEC
1
1
10 SEC
100
SEC
DC
0.1
IDM
Limit
limited
by RDS
0.01
0.1
1
10
100
180
160
140
120
100
80
60
40
20
0
0.001
1000
0.01
0.1
VDS Drain to Source Voltage (V)
1
10
100
1000
t1 TIME (SEC)
9. Safe Operating Area
10. Single Pulse Maximum Power Dissipation
1
D = 0.5
0.2
0.1
RθJA(t) = r(t) + RθJA
RθJA = 40 °C /W
0.1
0.05
0.02
0.01
P(pk)
Single Pulse
t1
t2
TJ - TA = P * RθJA(t)
Duty Cycle, D = t1 / t2
0.001
0.0001
0.001
0.01
0.1
1
10
100
1000
t1 TIME (sec)
11. Normalized Thermal Transient Junction to Ambient
© Preliminary
4
Publication Order Number:
DS_AM30N10-70D_1B
Analog Power
AM30N10-70D
Package Information
Note:
1. All Dimension Are In mm.
2. Package Body Sizes Exclude Mold Flash, Protrusion Or Gate Burrs. Mold Flash, Protrusion Or Gate Burrs Shall Not
Exceed 0.10 mm Per Side.
3. Package Body Sizes Determined At The Outermost Extremes Of The Plastic Body Exclusive Of Mold Flash, Gate
Burrs And Interlead Flash, But Including Any Mismatch Between The Top And Bottom Of The Plastic Body.
4. The Package Top May Be Smaller Than The Package Bottom.
5. Dimension "b" Does Not Include Dambar Protrusion. Allowable Dambar Protrusion Shall Be 0.10 mm Total In Excess
Of "b" Dimension At Maximum Material Condition. The Dambar Cannot Be Located On The Lower Radius Of The
Foot.
© Preliminary
5
Publication Order Number:
DS_AM30N10-70D_1B