link

AM3402N
Analog Power
N-Channel Logic Level MOSFET
These miniature surface mount MOSFETs
utilize a high cell density trench process to
provide low rDS(on) and to ensure minimal
power loss and heat dissipation. Typical
applications are DC-DC converters and power
management in portable and battery-powered
products such as computers, printers, PCMCIA
cards, cellular and cordless telephones.
•
•
•
•
PRODUCT SUMMARY
VDS (V)
rDS(on) (Ω)
0.027 @ VGS = 10 V
30
0.035 @ VGS = 4.5V
Low rDS(on) provides higher efficiency and
extends battery life
Low thermal impedance copper leadframe
TSOP-6 saves board space
Fast switching speed
High performance trench technology
ID (A)
6.3
5.5
1
6
2
5
3
4
o
ABSOLUTE MAXIMUM RATINGS (TA = 25 C UNLESS OTHERWISE NOTED)
Parameter
Symbol Maximum Units
VDS
Drain-Source Voltage
30
V
±20
Gate-Source Voltage
VGS
o
TA=25 C
a
Continuous Drain Current
o
6.3
ID
TA=70 C
b
Pulsed Drain Current
Continuous Source Current (Diode Conduction)
a
IDM
±20
IS
1.3
o
TA=25 C
a
Power Dissipation
o
Operating Junction and Storage Temperature Range
a
Maximum Junction-to-Ambient
W
1.0
o
TJ, Tstg -55 to 150
Symbol
t <= 5 sec
A
1.6
PD
TA=70 C
THERMAL RESISTANCE RATINGS
Parameter
A
5.2
RT HJA
C
Maximum Units
78.0
o
C/W
Notes
a.
Surface Mounted on 1” x 1” FR4 Board.
b.
Pulse width limited by maximum junction temperature
1
PRELIMINARY
Publication Order Number:
DS-AM3402_B
AM3402N
Analog Power
o
SPECIFICATIONS (TA = 25 C UNLESS OTHERWISE NOTED)
Parameter
Limits
Unit
Min Typ Max
Symbol
Test Conditions
Gate-Body Leakage
IGSS
VDS = 0 V, VGS = ±20 V
±100
nA
Zero Gate Voltage Drain Current
IDSS
VDS = 24 V, VGS = 0 V
1
10
uA
Switch Off Characteristics
VDS = 24 V, VGS = 0 V, TJ = 55oC
Switch On Characteristics
Gate-Threshold Voltage
VGS(th)
Drain-Source On-Resistance
A
A
Forward Tranconductance
A
On-State Drain Current
Diode Forward Voltage
Dynamic
rDS(on)
gfs
ID(on)
VSD
VDS = VGS, ID = 250 uA
VGS = 10 V, ID = 6.3 A
VGS = 10 V, ID = 6.3 A TJ = 55oC
VGS = 4.5 V, ID = 5.5 A
VDS = 10 V, ID = 6.3 A
VDS = 5 V, VGS = 10 V
IS = 1.3 A, VGS = 0 V
1.0
3.0
27
39
35
45
20
0.75
V
mΩ
S
A
V
b
Total Gate Charge
Gate-Source Charge
Gate-Drain Charge
Qg
Qgs
Qgd
VDS = 15 V, VGS = 5 V, ID = 6.3 A
RL = 6 Ω
9
2.9
3.2
nC
VDS = 15 V, RL = 6 Ω, ID = 1 A,
VGEN = 10 V
6
10
18
5
ns
Switching Characteristics
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall-Time
td(on)
tr
td(off)
tf
Notes
a.
Pulse test: PW <= 300us duty cycle <= 2%.
b.
Guaranteed by design, not subject to production testing.
Analog Power (APL) reserves the right to make changes without further notice to any products herein. APL makes no warranty, representation
or guarantee regarding the suitability of its products for any particular purpose, nor does APL assume any liability arising out of the application or
use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental
damages. “Typical” parameters which may be provided in APL data sheets and/or specifications can and do vary in different applications and
actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by
customer’s technical experts. APL does not convey any license under its patent rights nor the rights of others. APL products are not designed,
intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or
sustain life, or for any other application in which the failure of the APL product could create a situation where personal injury or death may occur.
Should Buyer purchase or use APL products for any such unintended or unauthorized application, Buyer shall indemnify and hold APL and its
officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney
fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that APL was negligent regarding the design or manufacture of the part. APL is an Equal Opportunity/Affirmative Action Employer.
2
PRELIMINARY
Publication Order Number:
DS-AM3402_B
AM3402N
Analog Power
Typical Electrical Characteristics (N-Channel)
Figure 2. On-Resistance Variation with
Drain Current and Gate Voltage
Figure 1. On-Region Characteristics
Figure 3. On-Resistance Variation
Figure 4. On-Resistance Variation with
with Temperature
Gate to Source Voltage
Figure 5. Transfer Characteristics
Figure 6. Body Diode Forward Voltage
Variation with Source Current and
Temperature
3
PRELIMINARY
Publication Order Number:
DS-AM3402_B
AM3402N
Analog Power
Typical Electrical Characteristics (N-Channel)
Normalized Thermal Transient Junction to Ambient
Figure 11. Transient Thermal Response Curve
4
PRELIMINARY
Publication Order Number:
DS-AM3402_B
AM3402N
Analog Power
Package Information
TSOP-6: 6LEAD
5
PRELIMINARY
Publication Order Number:
DS-AM3402_B