Tool & Product Update NEW PRODUCT RELEASE Market Release Model 940S and 940S-230 POWERRIG® Hydraulic Units The 940S and 940S-230 are electrically powered hydraulic power sources that operate Huck Hydraulic Installation Equipment. The units operate on either 460 or 230 volts, 60 Hz, 3 phase, AC. Hydraulic fluid directional flow is controlled from the installation equipment by a 24 volt AC control circuit. Output pressures as shipped are: Pull 5400 - 5700 psi ; Return 2200 - 2400 psi. The 940S features include: • The 940S series two stage pump design provides installation speeds nearly equal to 918 series • The unit has a high degree of portability with a specially designed handling bracket--see specifications for size and weight on reverse side • An emergency stop has been added to provide an additional safety feature • Unit is design to complement existing tools and hose kits with total interchangability. --- See SPECIFICATIONS on back ---- 02/14/96 - Rev. 10/30/98 403 SPECIFICATIONS • Weight: (dry) ................................ 123.5 lbs. -- 56.0 kg (wet) ................................ 162.0 lbs. -- 73.3 kg • Length: ......................................... 16.5 inches -- 419 mm • Width: ........................................... 18.6 inches -- 473 mm • Height: ......................................... 21.4 inches -- 544mm • Electrical System: (940S-230) .... 230 volts, 60 herts, 3 phase, AC (940S) .... 460 volts, 60 herts, 3 phase, AC • Remote Control: .......................... Solenoid operated directional valve, 24 volts AC • Motor: (940S-230) ........................ 3450 RPM, 3 HP, 8.2 amps nominal (940S) 3450 RPM, 3 HP, 4.1 amps nominal • Pump: ........................................... 2-stage, gear-piston type • Oil Control: .................................. Four-way solenoid operated directional valve • Reservoir Capacity: .................... 5.5 gallons -- 20.8 liters • Hydraulic Fluid: .......................... Fire-resistant hydraulic fluid to meet OSHA regulations (SUS 300 at 100º F and SUS 50 at 210º F) • Output Pressures: ...................... Adjustable for various tool series