Tool & Product Update O PERATING P RESSURES FOR 2600 SERIES T OOLS Based on maximum pinbreak values, the minimum operating pressure for the tool and fastener type combination should be as listed below: 2620 Pull Capacity at 6,500 psi: 17,745 lbs. 2624 Pull Capacity at 6,500 psi: 30,356 lbs. 2628 Pull Capacity at 6,500 psi: 39,858 lbs. 2630 Pull Capacity at 6,500 psi: 48,615 lbs. Fastener Type Maximum Pinbreak (lbs) -16 C50L -16 HF -16 BOM -16 HP8 12 mm H-Fit 12 mm HP10.9 Fastener Type 17,500 20,700 19,600 20,700 19,250 19,250 6,410 psi 7,580 psi 7,180 psi 7,580 psi 7,050 psi 7,050 psi Maximum Pinbreak (lbs) -20 C50L -20 HF -20 BOM -20 HP8 14 mm H-Fit 14 mm HP10.9 16 mm H-Fit 16 mm HP10.9 30,000 34,300 27,500 34,300 23,800 23,800 34,300 34,300 Maximum Pinbreak (lbs) -24 C50L -24 BOM -24 H-Fit -24 HP8 38,000 40,000 41,800 41,800 Fastener Type Maximum Pinbreak (lbs) 50,500 53,500 53,500 Minimum Operating Pressure 6,425 psi 7,345 psi 5,890 psi 7,345 psi 5,100 psi 5,100 psi 7,345 psi 7,345 psi Fastener Type -28 C50L 20 mm H-Fit 20 mm HP10.9 Minimum Operating Pressure Minimum Operating Pressure 6,200 psi 6,525 psi 6,815 psi 6,815 psi Minimum Operating Pressure 6,750 psi 7,155 psi 7,155 psi Values shown are within those called out on the sticker on the tool. Huck International, Inc. 800-278-4825 e-mail: [email protected] Huck International, Inc., 1 Corporate Drive, Kingston, NY 12401 (845) 331-7300 06/03/2002 503